• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.301-306
• /
• 2004

In this study, Dual servo mechanism with VCM(Voice Coil Motor) and PZT is designed for a high precision force and position control. We designed the VCM actuator and dual servo mechanism with leaf spring. VCM actuators, with their high linearity, simple structure, low weight, and high efficiency, are increasingly being used in micro-positioning applications. There are many kinds of VCM with a structure. VCM actuators are divided into two types by moving parts. One is moving magnet type and the other moving coil type. We described the properties of these two types of VCM. Design parameters of VCM are defined through the FEM simulation analysis of magnetic field and dynamic model of dual servo mechanism. These researches help to for decreasing loss in the air gap of VCM. We present dual servo mechanism is effective mechanism for a force control in hi h precision, properties of designed VCM.

• 전기의세계
• /
• v.40 no.6
• /
• pp.50-53
• /
• 1991

본문에서는 디스크장치를 중심으로 VCM과 관련된 일본의 제조업체 동향과 현재 출원중인 특허동향과 기술수준을 고찰함으로써 VCM 사업에 대한 인식을 새롭게 하고 VCM 시장 참여방안을 모색하는데 도움이 되고자 한다.

• Korean Journal of Biological Psychiatry
• /
• v.4 no.2
• /
• pp.246-250
• /
• 1997

Tardive dyskinesia(TD) is a serious side effect of long-term treatment with neuroleptic medications. To investigate if glutamatergic hyperfunction is associated with TD, effect of MK-801 on the prevention and treatment of TD was studied using a rat model, ie, vacuous chewing movements(VCM). When comparing VCM scores of GroupI(haldol decanoate+MK-801) with that of GroupII(haldol decanoate+phosphate buffer saline), late measured VCM scores of former were significantly lower than that of latter, meaning that MK-801 is effective in the prevention of VCM. Furthermore, when MK-801(0.1mg/kg, 0.3mg/kg) is administered to VCM(+) rats(VCM${\geq}$ 7/4min) of GroupII, VCM scores were significantly decreased, meaning that MK-801 is also effective in the treatment of VCM. From the above results, it is suggested that glutamatergic hyperfunction might be involved in the development of TD and MK-801 could be effective in the prevention and treatment of it.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.395-401
• /
• 2012

This study presents a method for the quantitative analysis of residual vinyl chloride monomer (VCM) in PVC products. In elution solvent, the extraction efficiency was similar by ethanol, THF, and acetone, but using n-hexane, it indicated relatively low extraction efficiency. Measuring VCM in the pulverized PVC samples, it showed reasonable results in both the direct injection method and headspace method with GC/MS. Regarding analysis of VCM in the intermediate sponge samples, five laboratories showed good results, and from the results, it was considered that VCM quantitative method in this study was reliable.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.69-75
• /
• 2004

In this paper, we propose the shape of extremely small thrust VCM for application of the Nanoindenter, which enables control of very small force and displacement. We performed optimization of the VCM shape using conjugated gradient method. And the purposes of optimization are the minimization of the permanent magnet size for the efficient systems, minimization of deviation of flux density from the air gap for operate on regular thrust and a linearization of thrust for a good control characteristic. The finite element method is used for characteristic analysis. The node moving method is used to redundant changes of design variables. As a result, the VCM produces a yew small force by the difference of flux density of lower part from higher one. Also, in a wide range of current (0［A］-1［A］), the VCM produces linear driving thrust by saturating the magnetic circuit path and operate on regular thrust by minimizing deviation of flux density of the air gap.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.153-158
• /
• 2010

This paper showed the possibilities of performance improvement of Brain-Computer Interface (BCI) decreasing classification error rates of EEG signals by applying Variance-Considered Machine (VCM) which proposed in our previous study. BCI means controlling system such as computer by brain signals. There are many factors which affect performances of BCI. In this paper, we used suggested algorithm as a classification algorithm, the most important factor of the system, and showed the increased correct rates. For the experiments, we used data which are measured during imaginary movements of left hand and foot. The results indicated that superiority of VCM by comparing error rates of the VCM and SVM. We had shown excellence of VCM with theoretical results and simulation results. In this study, superiority of VCM is demonstrated by error rates of real data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1381-1385
• /
• 2011

Hand-phone in the recently released high-end applied to the Camera Module is equipped with the most features Auto Focusing Camera Module and much greater importance of the pixel count is much more precise and reliable AF-powered products are being demanded by consumers. This paper is available now apply the Camera Module VCM (Actuator) for Auto Focusing Lens focal point of the problem location and resolution of positional deviation occurs Module Warranty and stable resolution of the improved structure for Actuator Drive Change the structure VCM is proposed

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.13-18
• /
• 2017

The injection molding analysis of VCM (Voice Coil Motor) housing for smart phone cameras were performed. We conducted the analysis in terms of injection molding pressure, the formation of weld lines, flow marks, and flow patterns. The goal of the analysis was targeted for the prediction of the optimal gate locations. Because the quality of VCM housing is strongly dependent on the precise control of the camera lens by its nature, we focused on the lens guiding lanes in the VCM housing. We first calculated the maximum injection molding pressure in terms of the filled volumes. The injection molding pressure were calculated within 146MPa at about 90% volume filled. We also investigated the possibility of the occurrence of design-related defects such flow marks, weld lines. Filling patterns regarding the design of the gate locations were delineated to find the weld lines. Throughout the simulations, the final deformations of the lens guiding lanes for the VCM housing were calculated. The deformations distribute ranging from $0.5{\mu}m$ to $2.50{\mu}m$, which were used to find the optimal design of the gates.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.577-579
• /
• 2002

Propose of this paper is VCM (voice coil motor) design for application of Nanoindenter, which enable control of extremely small force and displacement. This paper present the VCM shape to produce a very small force by the difference of flux density of lower part from higher one. In wide range of current. VCM produces linear driving force and operate on regular thrust having maximum displacement(100um) was practiced.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.129-135
• /
• 2010

The state feedback-based position controller for the voice coil motor(VCM) used in precise automated manufacturing processes is proposed and analyzed in this paper. The proposed controller has advantage over the conventional cascade-type P-PI controller in terms of the gain selection and the controller interference. The feasibility of the presented idea is verified by experimental results on a designed VCM.