• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.107-116
• /
• 2010

We developed the playback control software for a high-speed playback system which is a component of the Korea-Japan Joint VLBI Correlator (KJJVC). The Mark5B system, which is a recorder and playback system used in the Korean VLBI Network (KVN), has two kinds of operation mode. That is to say, the station unit (SU) mode, which is for the present Mark4 system, and the VSI mode, which is for the new VLBI standard interface (VSI) system. The software for SU is already developed and widely used in the Mark4 type VLBI system, but the software for VSI has only been developed for recording. The new VLBI system is designed with a VSI interface for compatibility between different systems. Therefore, the playback control software development of the VSI mode is needed for KVN. In this work, we developed the playback control software of the Mark5B VSI mode. The developed playback control software consists of an application part for data playing back, a data input/output part for the VSI board, a module for the StreamStor RAID board, and a user interface part, including an observation time control part. To verify the performance of developed playback control software, the playback and correlation experiments were performed using the real observation data in Mark5B system and KJJVC. To check the observation time control, the data playback experiment was performed between the Mark5B and Raw VLBI Data Buffer (RVDB) systems. Through the experimental results, we confirmed the performance of developed playback control software in the Mark5B VSI mode.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.319-321
• /
• 2005

한국천문연구원에서는 한국우주전파관측망(Korean VLBI Network; KVN)에서 사용할 관측 시스템 중에서 소규모 자료획득시스템(DAS) 구축을 위하여 기가비트 고속샘플러, PC-VSI 보드, 소프트웨어 상관기를 도입하였다. 고속샘플러는 기가비트급 ADS1000, PC-VSI 보드는 VSI-H(VLBI Standard Interface Hardware) 표준을 따른 PCI 버스를 채택하고 있어 일반 컴퓨터에 설치하여 동작되며, 이 규격을 갖춘 시스템과의 데이터 입출력이 가능하다. 소프트웨어 상관기는 일본 NILT와의 연구협력을 통하여 본 연구원에서도 사용할 수 있게 되었으며, FX와 XF 형 2가지를 모두 갖추고 있다. 하지만 현재 구현된 소프트웨어 상관기는 측지 VLBI 관측을 위해 설계되어 있어, 향후 KVN의 하드웨어 상관기와 함께 천문 VLBI 관측을 위한 3기선 분의 소프트웨어 상관기로 개량하려고 한다. 이상에서 소개한 시스템을 좁은 의미로 K5 시스템이라고도 한다. 본 논문에서는 PC-VSI 보드에 대해 간략히 소개하고, K5 시스템을 이용하여 관측한 결과를 빨리 관측자가 원하는 정보를 얻을 수 있는 소프트웨어 상관기의 구조에 대해서도 소개하고자 한다.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.125-134
• /
• 2005

In this paper, we propose a small-scale Gigabit VLBI observing system for the Korean VLBI Network (KVN) under construction. The system consists of high-speed sampler, IP-VLBI board, PC-VSI board, and software correlator. Radio signal received by receiver is sampled by high-speed sample. at 1 Gsps (Gigabit sample per second) rate with 2 bits quantization. The digitized signal is recorded in PC and the software correlator does the cross correlation. IP-VLBI board will be used for the geodesy VLBI observation, while PC-VSI board is for the astronomical VLBI observation. The PC-VSI board adopts the VSI-H (VLBI Standard Interface Hardware). The proposed system is based on commercial PCs and therefore can be built inexpensively.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.965-968
• /
• 2003

This paper describes the PWM-VSI controller of three-phase UPS system using stationary reference frame. This controller meets the specification the UPS inverter output voltage even under the unbalanced or nonlinear load. This controller is also constructed with duble control loop of the outer voltage control loop and the inner current control loop. For the fast response of the output voltage control, yhr inner current control loop of the capacitor current os used. To get the good property against overshoot, the If controller us used. The outer voltage controller is designed with P controller and the high gain transfer function is used for the zero steady state error. All control gains of both controller is designed base on the CDM method.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2259-2261
• /
• 1997

In this paper, control scheme of the three phase VSI(Voltage Source Inverter) for 200KVA UPS is described. The proposed controller is designed to robust against parameter variations, disturbances and load change using PI controller. The switching pattern is determined to Ramp Comparison Method. The inverter provides pure sinusoidal output voltage with very low THD (Total Harmonic Distortion). Finally, the performance of the proposed inverter is shown by experimental result.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.404-406
• /
• 2006

본 논문에서는 우주전파를 VLBI 관측시스템으로 관측한 후 고속으로 저장/재생하기 위한 시스템 구축에 관해 소개한다. 한국천문연구원에서는 2001년부터 국내 유일의 VLBI관측 시스템으로써 한국우주전파관측망(Korean VLBI Network; KVN)을 구죽하고 있다. KVN에서는 1Gsps/2bit 우주전파를 샘플링하는 샘플러와 디지털필터로 구성된 자료획득 시스템(Data Acquisition System; DAS)을 갖출 예정이다. 관측된 우주전파는 샘플러와 DAS를 통하여 처리된 데이터를 1Gbps이상의 속도로 기록된다. 본 논문에서는 1Gbps급의 대용량 데이터를 처리할 수 있는 시스템으로써 Mark5B 시스템의 구축과 시스템 구성, VSI-H, 시스템 운용 및 실험결과 등에 대해서 기술하고자 한다.

• Publications of The Korean Astronomical Society
• /
• v.19 no.1
• /
• pp.83-92
• /
• 2004

In this paper, we introduce the development of the large storage system in order to record the observed space radio signal in the Korean VLBI Network(KVN) with high-speed. The KVN is the Very Long Baseline Interferometery(VLBI) to observe the birth of star, the structure of space by constructing radio telescope with diameter 21m at the Seoul, Ulsan, Jeju from 2001 to 2007 years. To do this, Korea Astronomy Observatory joined the international consortium for developing the high-speed large storage system(Mark 5), which is developed by MIT Haystack observatory. The Mark 5 system based on hard disk has to record up to 1 Gbps the observed space radio signal. The main features of Mark 5 system are as follows; First it is able to directly record the input data to the hard disk without PC1(Peripheral Component Interconnect) internal bus, and the second, it has two hard disk banks, which are able to hot-swap ATA/IDE type very cheap up to 1 Gbps recording and playback. The third is that it follows the international VLBI standard interface hardware(VSI-H). Therefore it can be connect directly the VSI-H type system at the input/output. Finally it also supports e- VLBI(Electronic-VLBI) through the standard Gigabits Ethernet connection.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.319-326
• /
• 2023

In this paper, simulation and experimental results are presented, including the implementation of a digital controller for robust output voltage control of a single-phase voltage source inverters (VSIs) and total harmonic distortion (T.H.D.v) analysis. Typically, the VSIs uses a proportional integral (PI) controller for the current controller on the inner loop and a proportional resonant (PR) controller for the voltage controller on the outer loop to control the output voltage. However, non-linear loads still produce high-order odd harmonic distortion. Therefore, in this paper, a proportional multiple resonance (PMR) controller with a resonance controller for odd harmonic frequencies is proposed to suppress harmonic distortion. Analyze the frequency response of controllers for VSI plants and design PMR controllers. Through simulation, the total harmonic distortion characteristics of the output voltage are compared and verified when PI and PMR are used as voltage controllers. Both linear and non-linear loading conditions were considered. Finally, the effectiveness of the PMR controller was demonstrated by applying it to a 3kW VSIs prototype.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.574-585
• /
• 2015

This paper aims to improve the performance of conventional direct torque control (DTC) drives proposed by Takahashi by extending the idea for 5-level inverter. Hybrid cascaded H-bridge topology is used to achieve inverter voltage vector composed of 5-level of voltage. Although DTC is very popular for its simplicity but it suffers from some disadvantages like- high torque ripple and uncontrollable switching frequency. To compensate these shortcomings conventional DTC strategy is modified for five levels voltage source inverter (VSI). Multilevel hysteresis controller for both flux and torque is used. Optimal voltage vector selection from precise lookup table utilizing 12 sector, 9 torque level and 4 flux level is proposed to improve DTC performance. These voltage references are produced utilizing a hybrid cascaded H-bridge multilevel inverter, where inverter each phase can be realized using multiple dc source. Fuel cells, car batteries or ultra-capacitor are normally the choice of required dc source. Simulation results shows that the DTC drive performance is considerably improved in terms of lower torque and flux ripple and less THD. These have been experimentally evaluated and compared with the basic DTC developed by Takahashi.

• Journal of the Korean Chemical Society
• /
• v.40 no.10
• /
• pp.663-669
• /
• 1996

The rate constants for the nucleophilic addition reactions of thioglycolic acid to vinylsulfilimine(VSI) derivatives(p-OCH3, H, p-Cl and p-Br) were determined by an ultraviolet spectrophotometric method, and rate equations which can be applied over a wide pH range were obtained. On the basis of rate equation, general base catalysis and substituent effect, a plausible addition reaction mechanism was proposed: Below pH 3.0, the reaction was proceeded via the addition of neutral molecule to carbon-carbon double bond after protonation at the nitrogen atom of the sulfilimine, and in the pH range of 3.0 to 9.0, the neutral molecule and its anion attacked to carbon-carbon double bond competitively. Above pH 9.0, sulfide anion added to the double bond (Michael type addition).