• 한국재난정보학회 논문집
• /
• 제2권1호
• /
• pp.39-52
• /
• 2006

In this paper, an analytical and experimental study was performed in order to determine the effects of interaction between vehicle and structure. Results presented in the paper show that analytical method including moving load effect can investigate the trend of structural response due to dynamic interaction between vehicle and structure. The wheel tracking machine fitted with 2-axle test vehicle can demonstrate more accurate dynamic interaction between vehicle and structure than the wheel tracking machine fitted without 2-axle test vehicle.

• 한국재난정보학회 논문집
• /
• 제7권3호
• /
• pp.190-197
• /
• 2011

본 연구에서는 타이어를 장착한 차량시험기에서 교량과 차량의 상호작용효과를 분석하고자 반복하중시험을 실시하고 이에 대한 동적반응을 파악하였다. 이를 위하여 차량-교량간 상호작용이 포함된 이동질량형 윤하중 실험기를 단순교 형식의 교량에 적용하여 이동질량 반복주행실험을 수행하였다. 이동질량 반복주행실험 결과를 분석하여 차량-교량간의 상호작용을 포함한 가속도 형태의 실동주행차량가속도를 규명하였다. 규명된 차량의 실동주행차량가속도를 범용 해석프로그램에 적용하여 차량-교량 상호작용을 재현할 수 있었다.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 2001

Unlike structures in the air, the vibration analysis of a submerged or floating structure such as offshore structures or ships is possible only when the fluid-structure interaction is understood, as the whole or part of the structure is in contact with water. This paper introduces two methods to find natural frequency in consideration of fluid-structure interaction, direct coupled vibration analysis and fluid-structure modal coupled vibration analysis. The purpose of this study is to analyze the vibration characteristic of a submerged vehicle to obtain the anti-vibration design data, which could be used in the preliminary design stage. The underwater pressure hull of submerged vehicle is used as the model of this study. The F.E.M. model is meshed by shell and beam elements. Also, considering the inner hull weight, the mass element is distributed in the direction of hull length. Numerical calculations are accomplished by using the commercial B.E.M. code. The characteristics of natural frequency, mode shape and frequency-displacement response are analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.204-209
• /
• 2004

Recently, the various performances of vehicle are rapidly improved. Therefore tire noise is recognized as important noise source because vehicle noise is considerably reduced. This study is performed for the control of the cavity resonance noise that is structure-borne noise, due to fluid(air)-structure interaction. For this investigation, FRF analysis has been carried out using FEM and we found an important factor affecting cavity resonance. The effect of this factor is confirmed by objective noise test. We confirmed that the result of FRF analysis and objective noise test is that the structure control of tire sidewall can reduce cavity resonance noise due to fluid-structure interaction

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.81-88
• /
• 2000

Unlike structures in the air, the vibration analysis of a submerged or floating structure such as offshore structures or ships is possible only when the fluid-structure interaction is understood, as the whole or part of the structure is in contact with water. Specially, the importance of the added mass is not necessary to say like the submerged vehicle, all of the hull body, is positioned in the water. This paper introduce two method to find natural frequency in consideration of fluid-structure modal coupled vibration analysis. The purpose of this study is to analyze of the vibration characteristic of submerged vehicle to obtain the anti-vibration design data, which could be used in the preliminary design stage data. Underwater pressure hull of submerged vehicle is used as the model of this study. The F.E.M model is meshed by shell and beam element. Also, considering of the inner hull weight, mass element is distributed in the direction of hull length. Numerical calculations are accomplished using the commercial B.E.M code. The characteristics of natural frequency(eigenvalues), mode shape(eigenvectors) and frequency-displacement response are analyzed. The results of this study will be used as the useful design data in preliminary anti-vibration design stage.

• Structural Engineering and Mechanics
• /
• 제20권1호
• /
• pp.111-121
• /
• 2005

The dynamic interaction of vehicle-bridge is studied by using transfer matrix method in this paper. The vehicle model is simplified as a spring-damping-mass system. By adopting the idea of Newmark-${\beta}$ method, the partial differential equation of structure vibration is transformed into a differential equation irrelevant to time. Then, this differential equation is solved by transfer matrix method. The prospective application of this method in real engineering is finally demonstrated by several examples.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.644-650
• /
• 2010

본 본 연구에서는 교량의 동적거동에 미치는 영향을 분석하기 위한 교량-차량거동을 파악 하고자 실험적 연구를 수행하였다. 이를 위하여 차량 교량 간 상호작용이 포함된 이동질량 형 윤하중 시험기를 조립식 프리캐스트 패널형식의 단순교량에 적용하여 이동질량 반복주행실험을 수행하였다. 실험분석 결과 차량-교량간 상호작용은 교량의 동적거동에 예측 가능한 거동뿐 아니라 상반거동 및 반전현상등의 추가적인 다양한 거동을 발생시킴을 알 수 있었다.

• 한국재난정보학회 논문집
• /
• 제7권3호
• /
• pp.198-205
• /
• 2011

본 연구에서는 차량-교량 간 상호작용효과가 교량의 동적거동에 미치는 영향을 분석하기 위한 실험적 연구를 수행하였다. 이를 위하여 차량 교량 간 상호작용이 포함된 이동 질량 형 윤하중 시험기를 조립식 프리캐스트 패널형식의 단순교량에 적용하여 이동질량 반복주행실험을 수행하였다. 실험분석 결과 차량-교량 간 상호 작용은 교량의 동적거동에 예측 가능한 거동뿐 아니라 상반거동 및 반전현상 등의 추가적인 다양한 거동을 발생시킴을 알 수 있었다.

• Earthquakes and Structures
• /
• 제26권2호
• /
• pp.149-162
• /
• 2024

Aiming at the current research on the dynamic response analysis of the vehicle-bridge system under earthquake, which fails to comprehensively consider the impact of seismic wave incidence angles, terrain effects and soil-structure dynamic interaction on the bridge structure, this paper proposes a multi-point excitation input method that can consider the oblique incidence seismic P Waves based on the viscous-spring artificial boundary theory, and verifies the accuracy and feasibility of the input method. An overall numerical model of vehicle-bridge-soil foundation system in valley terrain during oblique incidence of seismic P-wave is established, and the effects of seismic wave incidence characteristics, terrain effects, soil-structure dynamic interactions, and vehicle speeds on the dynamic response of the bridge are analyzed. The research results indicate that with an increase in P wave incident angle, the vertical dynamic response of the bridge structure decreased while the horizontal dynamic response increased significantly. Traditional design methods which neglect multi-point excitation would lead to an unsafe structure. The dynamic response of the bridge structure significantly increases at the ridge while weakening at the valley. The dynamic response of bridge structures under earthquake action does not always increase with increasing train speed, but reaches a maximum value at a certain speed. Ignoring soil-structure dynamic interaction would reduce the vertical dynamic response of the bridge piers. The research results can provide a theoretical basis for the seismic design of vehicle-bridge systems in complex mountainous terrain under earthquake excitation.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.49-57
• /
• 2013

Analysis of fluid-structure interaction for two nearby underwater vehicles immersed in the sea is quite challenging because simulation of flow around them is very difficult due to the complexity of underwater vehicle shapes. The conventional approach using body-fitted or unstructured grids demands much time in dynamic grid generation, and yields slow convergence of solution. Since an analysis of fluid-structure interaction must be based on accurate simulation results, a more efficient way of simulating flow around underwater vehicles, without sacrificing accuracy, is desirable. An immersed boundary method facilitates implementation of complicated underwater-vehicle shapes on a Cartesian grid system. An LES modeling is also incorporated to resolve turbulent eddies. In this paper, we will demonstrate the effectiveness of the immersed boundary method we adopted, by presenting the simulation results on the flow around a modeled high-speed underwater vehicle interacting with a modeled low-speed one.