• Journal of Mechanical Science and Technology
• /
• v.18 no.6
• /
• pp.990-1001
• /
• 2004

The retention of a molten pool vessel cooled by internal vessel reflooding and/or external vessel reactor cavity flooding has been considered as one of severe accident management strategies. The present numerical study investigates the effect of both internal and external vessel mixed cooling on an internally heated molten pool. The molten pool is confined in a hemispherical vessel with reference to the thermal behavior of the vessel wall. In this study, our numerical model used a scaled-down reactor vessel of a KSNP (Korea Standard Nuclear Power) reactor design of 1000 MWe (a Pressurized Water Reactor with a large and dry containment). Well-known temperature-dependent boiling heat transfer curves are applied to the internal and external vessel cooling boundaries. Radiative heat transfer has been considered in the case of dry internal vessel boundary condition. Computational results show that the external cooling vessel boundary conditions have better effectiveness than internal vessel cooling in the retention of the melt pool vessel failure.

• Journal of Plant Biology
• /
• v.31 no.3
• /
• pp.169-185
• /
• 1988

Vessel elements in lateral root, tap root, transition region, stem and mid vein of 1-year old, 3-year old and 5-year old ginseng (Panax ginseng C.A. Meyer) are studied with light microscope to clarify the distribution and differentiation of several kinds of vessel elements. Vessel elements are classified into five types such as ring vessel, spiral vessel, scalariform vessel, reticulate vessel and pitted vessel according to the secondary thickenings of cell wall. All of the five types are not observed in each organ, but diverse kinds of vessels are present in stem and mid vein compared with the underground organs such as tap root and lateral root. The length of vessel elements is longest (680$\mu$m) in stem and shortest (143$\mu$m) in tap root. The diameter of vessel elements is 19.0$\mu$m in tap root and the angle of perforation plate comes under 22$^{\circ}$-60$^{\circ}$. The degree of differentiation of vessel elements according to the length, diameter and angle of perforation plate of vessel elements is highest in tap root regardless of the age of ginseng. Three types of perforation plate such as scalariform, intermediate type of simple and scalariform, and simple perforation plate are observed. The vascular tracheids are characteristically observed in mid vein of 1-year old ginseng, and in transition region of 3 and 5-year old ginseng.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.2
• /
• pp.136-143
• /
• 2013

The analysis of the written verdicts in recent five years was conducted to obtain preventive measures of collision between fishing vessel and non fishing vessel. As a result, a collision much happened in offshore trap for fishing vessel and below 5,000 tons of small and medium class for non fishing vessel. A person involved in a marine accident occupied 68% in sixth class deck officer and small boat operator for fishing vessel and 29% in third class deck officer for non fishing vessel. 90% of the collision happened in a underway by operating state and 84% in sight of one another by visibility state. The systemic radar training was required since 47% of the collisions was occurred on the condition of radar operation in fishing vessel. The main cause of poor lookout was a intensive fishing and poor lookout on movement by radar for fishing vessel and one man watch system and no recognition of one another by radar for non fishing vessel. This result is expected to contribute for the decrease of collision.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.713-718
• /
• 1997

In the TMI-2 accident, approximately twenty(20) tons of molten core material drained into the lower plenum. Early advanced light water reactor (LWR) designs assumed a lower head failure and incorporated various measures for ex-vessel accident mitigation. However, one of the major findings from the TMI-2 Vessel Investigation Project was that one part of the reactor lower head wall estimated to have attained a temperature of 1100$^{\circ}C$ for about 30 minutes has seemingly experienced a comparatively rapid cooldown with no major threat to the vessel integrity. In this regard, recent empirical and analytical studies have shifted interests to such in-vessel retention designs or strategies as reactor cavity flooding, in-vessel flooding and engineered gap cooling of the vessel Accurate thermohydrodynamic and creep deformation modeling and rupture prediction are the key to the success in developing practically useful in-vessel accident/risk management strategies. As an advanced in-vessel design concept, this work presents the COrium Attack Syndrome Immunization Structures (COASIS) that are being developed as prospective in-vessel retention devices for a next-generation LWR in concert with existing ex-vessel management measures. Both the engineered gap structures in-vessel (COASISI) and ex-vessel (COASISO) are demonstrated to maintain effective heat transfer geometry during molten core debris attack when applied to the Korean Standard Nuclear Power Plant(KSNPP) reactor. The likelihood of lower head creep rupture during a severe accident is found to be significantly suppressed by the COASIS options.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.228-233
• /
• 2000

The Korean Next Generation Reactor(KNGR) is a Pressurized Water Reactor adopting direct vessel injection(DVI) to optimize the performance of emergency core cooling system(ECCS). In a certain accident, however, pressurized thermal shock(PTS) of the vessel due to the sudden contact with the injected cold water is expected. In this paper, an accident of Main Steam Line Break(MSLB) has been numerically investigated with direct vessel injections and an increased volume flow rate in some cold legs. Using FLUENT code, temperature distributions of the fluid in the downcomer and of reactor vessel including the core region have been calculated, together with the distribution of convective heat transfer coefficient(CHTC) at the cladding surface of the reactor vessel. The result shows that some parts of the core region of the reactor vessel have higher temperature gradient expressing higher thermal stress.

• Nuclear Engineering and Technology
• /
• v.28 no.6
• /
• pp.576-582
• /
• 1996

The integrity of reactor vessel support system of the Korean Standard Nuclear Power Plant (KSNPP) is investigated for a postulated reactor vessel closure head drop event. The closure head is disassembled from the reactor vessel during refueling process or general inspection of reactor vessel and internal structures, and carried to proposed location by the head lift rig. A postulated closure head drop event could be anticipated during closure head handling process. The drop event may cause an impact load on the reactor vessel and supporting system. The integrity of the supporting system is directly relevant to that of reactor vessel and reactor internals including fuels. Results derived by elastic impact analysis, linear and non-linear buckling analysis and elasto-plastic stress analysis of the supporting system implied that the integrity of the reactor vessel supporting system is intact for a postulated reactor vessel closure head drop event.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.66-73
• /
• 2015

Background: A numerical simulation was carried out to investigate the difference between internal and external heat-flux distributions at the reactor vessel wall under in-vessel retention through external reactor vessel cooling (IVR-ERVC). Methods: Total loss of feed water, station blackout, and large break loss of coolant accidents were selected as the severe accident scenarios, and a transient analysis using the element-birth-and-death technique was conducted to reflect the vessel erosion (vessel wall thickness change) effect. Results: It was found that the maximum heat flux at the focusing region was decreased at least 10% when considering the two-dimensional heat conduction at the reactor vessel wall. Conclusion: The results show that a higher thermal margin for the IVR-ERVC strategy can be achieved in the focusing region. In addition, sensitivity studies revealed that the heat flux and reactor vessel thickness are dominantly affected by the molten corium pool formation according to the accident scenario.

• The Journal of Korean Medical History
• /
• v.36 no.1
• /
• pp.11-21
• /
• 2023

Objectives : This paper is to find the meaning of Tan pulse at Chon and Cheok area due to pathological situation at Yang-gyo vessel & Yin-gyo vessel in Qikooujiudamai Diagnosis. Methods : In terms of Qikooujiudamai, the position to diagnose the Yang-gyo vessel & Yin-gyo vessel is Chon and Cheok position and the pulse is Tan pulse. To find the meaning of Tan pulse, wi-gi was analyzed. Then the correlation between Yang-gyo vessel & Yin-gyo vessel with wi-gi was analyzed to find the meaning of Tan pulse. Results & Conclusion : Yang-gyo vessel & Yin-gyo vessel have close connection with Wi-gi and its rise and fall is expressed by sleep. The Tan pulse means that Yang-gyo vessel & Yin-gyo vessel is in pathological situation by Wi-gi. By knowing the Qikooujiudamai's meaning, we can use acupucture treatment and medicine more precisely.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2016

In this study, a Vessel Shore Report Management System (VSRMS) is developed for the International Maritime Organization (IMO), Maritime Service Portfolio (MSP) Number 8, which comprises vessel shore reporting. Several documents have to be completed before the arrival/departure of a vessel at a port, as each national port has its own reporting format and data. The present vessel reporting system is inefficient, time-consuming, and involves excessive paperwork, which results in duplications and errors. To solve this problem, in this study, the vessel reporting formats and data contents of various national ports are investigated, as at present, the reporting documents required by the current IMO standard includes insufficient information which is requested by national ports. Initially, the vessel reporting information of various national ports are collected and analyzed. Subsequently, a database structure for managing vessel reporting data for ports worldwide is devised. To make the transfer of data and the exchange of information of vessel reports much more reliable, efficient, and paper-free, VSRMS, which is a software application for the simplification and facilitation of vessel report formalities, is developed. This application is developed using the latest Microsoft C#.Net Programming Language in the Microsoft Visual Studio framework 4.5. It provides a user interface and a backend MySQL server used for database management. SAP Crystal Reports 2013 is used for designing and generating vessel reports in the original report formats. The VSRMS can facilitate vessel reporting and improve data accuracy through the reduction of input data, efficient data exchange, and reduction of the cost of communication. Adoption of the VSRMS will allow the vessel shore reporting system to be automated, resulting in enhanced work efficiency for shipping companies. Based on this information system and architecture, the consensus of various international organizations, such as the IMO, the International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA), the Federation of National Associations of Ship Brokers and Agents (FONASBA), and the Baltic and International Maritime Council (BIMCO), is required so that vessel reporting is standardized internationally.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.1
• /
• pp.49-56
• /
• 2003

Based on the flow patterns of cylindrical vessel, the flow patterns of conical vessel, spherical vessel, rectangular vessel and cylindrical vessel with baffles were visualized by a trace method using aluminum powder. In addition, the correlations of the critical circulating frequency for mixing were derived from the experimental results. The conical and spherical vessels which have circular cross sections were same effective as cylindrical vessel for the shake mixing due to developing the rotational flow. Both a rectangular vessel and a cylindrical vessel with baffles should not be adapted for shake mixing because of not developing rotational flows in these type of vessels.