• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2016년도 제54차 하계학술대회논문집 24권2호
• /
• pp.39-40
• /
• 2016

본 연구는 온라인을 활용한 범교과적 글쓰기(WAC) 수업 방안을 연구한 것으로 크게 세 가지에 초점을 두어 진행하였다. 첫째, WAC 수업은 현재 교수자와 학습자 간의 일대일 상담으로 진행되고 있다. 온라인을 통해 WAC 수업이 운용된다면 교수자와 학습자 간의 시간과 에너지를 줄여서 탄력적으로 운용될 수 있다. 둘째, 오프라인 상에서 이루어진 WAC 수업은 소규모 강좌에서 이루어져 왔다. 그러나 온라인을 통해 WAC 수업이 진행된다면 대학에서 소규모가 아닌 중규모에서 도 WAC 수업이 가능하다. 셋째, WAC 수업이 원활하게 진행되기 위해서는 글쓰기 센터가 중심이 되어야 한다. 이를 통해 교수자와 학습자 간의 선진화된 WAC 프로그램이 개발될 것이다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (D)
• /
• pp.23-26
• /
• 2008

본 논문은 Web 환경에서의 사용자의 권한을 검증하고 권한에 대한 이중적인 접근제어 서비스를 제공하는 역할기반의 WAC 시스템의 블럭 설계서를 제안한다. WAC 시스템은 User Interface Block, Access Control Block, Cipher module Block, DataBase로 구성 되며, WAC 시스템의 기능분류모델을 이용한 Block의 세부사항과 WAC 시스템 기본 Bock(Access Control Bock)의 기본 기능 설계 및 사용자 접근제어 기능 설계, DES 기반의 암호 Bock 기능 설계, 인터페이스 설계 대한 WAC 시스템의 전체적인 Block 설계 에 대하여 기술한다.

• 한국환경과학회지
• /
• 제26권5호
• /
• pp.609-619
• /
• 2017

The removal characteristics of 2,4-dinitrophenol (2,4-DNP) from an aqueous solution by commercial Wood-based Activated Carbon (WAC) have been studied. The effects of various experimental parameters were investigated using a batch adsorption technique. The adsorption capacity of 2,4-DNP by WAC increased with a decrease in the dosage and particle size of WAC, temperature and the initial pH of the solution, and increased with an increase in the initial concentration of the solution. The adsorption equilibrium data were best described by the Redlich-Peterson isotherm model. The maximum adsorption capacities of 2,4-DNP by WAC were 573.07 mg/g at 293 K, 500.00 mg/g at 313 K, and 476.19 mg/g at 333 K, decreasing with increasing temperature. The kinetic data were well fitted to the pseudo-second-order model, and the results of the intra-particle diffusion model suggested that the adsorption process was mainly controlled by particle diffusion. The thermodynamic analysis indicated that the adsorption of 2,4-DNP by WAC was an endothermic and spontaneous process.

• 대한수학회논문집
• /
• 제21권2호
• /
• pp.211-217
• /
• 2006

Topos is a set-like category. In topos, the axiom of choice can be expressed as (AC1), (AC2) and (AC3). Category Fuz of fuzzy sets has a similar function to the topos Set and it forms weak topos. But Fuz does not satisfy (AC1), (AC2) and (AC3). So we define (WAC1), (WAC2) and (WAC3) in weak topos Fuz. And we show that they are equivalent in Fuz.

• 한국산업보건학회지
• /
• 제15권2호
• /
• pp.104-113
• /
• 2005

A variety of ergonomic assessment methods of lifting tasks known as a major cause of work-related lower back pain have been used. But there is a limited information in choosing the most appropriate assessment method for a particular job and in finding out strengths and weakness of the methods. The purpose of this study was to assess and compare the ergonomic risks of lifting tasks in a marine diesel engine production industry by three lifting ergonomic assessment tools widely used: the National Institute for Occupational Safety and Health(NIOSH) Revised Lifting Equation(NLE), the Washington Administrative Code 296-62-0517(WAC), and the Snook Tables. Lifting index(weight of load/Recommended Weight Limit) of NLE($LI_{NLE}$) was above 1 at 34 tasks(75.6%) of a total number of 45 lifting tasks. LI of WAC($LI_{WAC}$) was above 1 at 11 tasks(24.4 %). LI of Snook Table($LI_{Snook}$) was above 1 at 29 tasks(64.4%). Thus, LI was high in orders of $LI_{NLE}$ > $LI_{Snook}$ > $LI_{WAC}$. There were significantly high correlations among three Lls(p<0.01). The correlation coefficients between $LI_{NLE}$and the other three Lls($LI_{WAC}$ and $LI_{Snook}$) were r=0.93 and r=0.88, respectively. The linear regression equations were y = 0.444x + 0.11(r=0.93) between $LI_{NLE}$ and $LI_{WAC}$, y = 0.93x + 0.008(r=0.88) between LI(NLE) and $LI_{Snook}$. The LI values by WAC was significantly lower than those by the other tools. The compared features, strength and limitation among these tools were described in this paper.

• 전자공학회논문지
• /
• 제50권5호
• /
• pp.150-164
• /
• 2013

WAC (Wholesale Application Community) 기반 모바일 웹 애플리케이션의 보급이 널리 확산됨에 따라 자바스크립트와 HTML (Hyper Text Markup Language)로 구현된 애플리케이션의 처리 성능이 점차 이슈화되고 있다. 단순한 처리 기능만을 갖는 구조라면 현재 통용되는 브라우저에서도 문제가 없지만 자바스크립트의 처리량이 점점 증가 할수록 브라우저의 처리 부담 또한 가중된다. 현재 상용화 되어 있는 모바일 브라우저에서는 자바스크립트의 처리에 시간 및 용량의 제한을 두고 있다. 이러한 문제점의 해결을 위한 대안으로서 HTML 5에서는 기존의 자바스크립트에서는 지원하지 않는 멀티 스레드 구현을 위한 Web Worker를 제공하고 있다. Web Worker는 싱글 스레드에서 처리하는 일정 부분을 별도의 스레드를 통해서 처리하는 메커니즘을 제공한다. 하지만 이는 모바일상의 Native 애플리케이션만큼의 처리 능력을 보장하는 것이 아니며 근본적인 처리 속도 개선 방법으로는 미흡하다. Cyclostorm은 이러한 모바일 상에서의 자바스크립트 처리를 클라우드 상의 컴퓨터 서버에 이전함으로써 모바일 클라이언트로서의 자원적 한계를 극복하고 고성능 처리 서비스를 제공하여 Native 애플리케이션 만큼의 성능을 보장한다. 성능 평가 실험에서 Cyclostorm은 기존의 모바일 브라우저에서의 자바스크립트 처리보다 최대 6배 빠른 처리 속도를 보이고 있고 HTML 5의 Web Worker보다는 3~6배정도의 빠른 성능을 보이고 있다. 또한 메모리 부분에서도 서버 측에 존재하는 메모리를 사용하기 때문에 전반적으로 기존의 방법보다는 낮은 사용량이 측정 되었다. 본 논문에서는 현재 모바일 산업에서 화두가 되고 있는 WAC 기반에서 모바일 브라우저가 갖고 있는 한계를 극복하고 기존 웹 애플리케이션의 성능을 획기적으로 개선할 수 있는 클라우드 컴퓨팅 서비스인 Cyclostorm을 소개한다.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.256-264
• /
• 2004

Adsorption characteristics of three endocrine disruptors, amitrol, nonylphenol, and bisphenol-A, were evaluated depending on the type and service duration of activated carbon (AC). Bituminous coal-, wood-, and coconut-based coals were tested. Bituminous coal-based AC (BCAC) had the greatest sorption capacity for the three chemicals tested, followed by wood-based AC (WAC) for nonylphenol and coconut palm-based AC (CAC) for bisphenol-A. During the column test, amitrol removal efficiency increased over time, indicating that hydrophilic endocrine disruptors are biodegraded in the AC column. Removal efficiencies of hydrophobic compounds such as nonylphenol and bisphenol-A decreased over time since the main removal mechanism was adsorption. The order of the amitrol removal was: BCAC-5.9 yr, CAC-3.l yr > BCAC-2.2 yr > BCAC-virgin > CAC-virgin > WAC-virgin > WAC-3.l yr. In general, used AC had greater removals than virgin AC. The order of the bisphenol-A removal was: CAC-virgin > BCAC-2.2 yr > CAC-3.l yr > WAC-virgin > BCAC-5.9 yr > WAC-3.l yr. The order of the nonylphenol removal was: BCAC-virgin > WAC-virgin > CAC-3.1 yr, WAC-3.1yr> BCAC-2.2 yr > BCAC-5.9 yr > CAC-3.1 yr. Bituminous coal AC performed the best over time. Endocrine disruptors such as these three compounds appear to be removed effectively by activated carbon through biodegradation and adsorption. Wood and coal based among the virgin ACs and 3.1 years used wood base among the used ACs appeared the lowest carbon usage rate(CUR) for nonylphenol removal by prediction model. Virgin and used coconut base ACs except BCAC had the lowest CUR for removal Bisphenol-A. Biodegradation of nonylphenol and Bisphenol-A did not occurred during the 9,800 bed volume experiment period. BCAC had the highest biodegradation capacity of 46% for amitrol among virgin ACs and the used coal based ACs had 33-44% higher biodegradation capacity than virgin's for amitrol so biodegradation is the effective removal technology for hydrophilic material such as amitrol.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.66-80
• /
• 1997

This paper describes a newly developed arc-sensing algorithm of seam-tracking for FCA W (flux-cored arc welding) horizontal fillet welding. In this algorithm, arc current and the Weighted-Are-Current (WAC) are used to adjust the position of a weld torch in directions of bead throat and weaving, respectively. The WAC, which is newly devised in this study, means that arc current in the vicinity of weaving end is more emphasized than that in the center of weaving. The reason of this is because there usually exists much noise in the center of weaving due to abrupt change of arc length in case some empty gaps exist in a fillet joint Variance analysis was performed in order to check the effect of weld parameters on arc current and the WAC. As a result, the relationships between tip-to-workpiece distance and arc current, and between weaving offset and the WAC were established.To check "the validity of the algorithm, seam-tracking experiments were performed ;mder various welding condition. The result of experiments showed a satisfactory tracking performance in the presence of empty gaps in a horizontal fillet joint.et joint.

• 한국산업보건학회지
• /
• 제19권2호
• /
• pp.88-95
• /
• 2009

There are many assessment techniques used for occupational risk factors of MSDs in the workplaces. However, because all ergonomic assesment techniques or tools are based on theoretical background derived from workphysiology, biomechanics, psychophysics, industrial hygiene, work system, and etc, it is impossible to compare the assessment techniques. This study was conducted to compare the excess rates of risk factors among ergonomic assessment techniques and to make alternative methods. Site-visits to 6 automobile products and parts company provided data for process repeated work where the produced data was examined for evaluating the relationship between workplace lay-out and work posture by using ergonomic assessment techniques. We evaluated 157 jobs for simple repeated work and 37 jobs for manual materials handling (MMH). In simple repeated work, the exceeded rates of AC were 36.3% in OWAS method and 93.0% in RULA method. The exceeded rate for RULA method was significantly higher than those for OWAS method (p<0.05). In MMH, the exceeded rates of AC were 80.0% in NLE method and 76.5% in WAC method. Statistically significant differences were not identified in the exceeded rates for NLE and MAC methods (p<0.05). The analyzed results among ergonomic assessment techniques (OWAS, RULA, NLE/WAC) were applied to the same work places performing simple repeated work and manual materials handling simultaneously. The applied results showed statistically significant differences (p<0.05) among ergonomic assessment techniques (OWAS, RULA, NLE/WAC). Exceeded rates of four ergonomic assessment techniques in decreasing order was "RULA>NLE>WAC>OWAS". The RULA method was the strongest assessment technique for automobile products and parts company. We discovered that the results could easily be overestimated or underestimated when the ergonomic assessment techniques were not applied correctly during the evaluation process. Therefore, we recommend using at least 2 methods when evaluating and analysing the results.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.359-366
• /
• 2011

In this study we experimented that how polyurethane effect to acrylic-polyurethane resin in Full-Grain leather coatings. First of all, we consummated waterborne acrylic emulsion and waterborne polyurethane resin, Than we prepared F.G leathers which were coated by acrylic resin and acrylic-polyurethane resins. According to measured data for solvent resistance, acrylic resin and acrylic-polyurethane resins had good property. Sample a(WAC) had most low strength($2.10kg_f/mm^2$) and sample d(WAC 93 : WPU 7) had most high strength($3.41kg_f/mm^2$). Also we knew that most good property of abrasion is d(47.4 mg). In elongation case, a(WAC) had most good result(645 %) in this experiment.