• Title/Summary/Keyword: WSFL

Search Result 9, Processing Time 0.032 seconds

The Embedding Reliability and The Spectrum Characteristic of Fiber Bragg Grating Sensor Embedded into Composite Laminates (복합재 평판 내부에 삽입된 광섬유 브래그 격자 센서의 삽입안전성과 신호 특성에 관한 연구)

  • 이정률;류치영;강현규;김대현;구본용;강동훈;홍창선;김천곤
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2000.11a
    • /
    • pp.238-244
    • /
    • 2000
  • FBGs have been extensively used as strain sensors or temperature sensors in a variety of applications related to composites because of embedding ability, small size and multiplexing capability. We inspected embedding environments inside composites with optical fiber by microscope analysis and birefringence characteristics of FBG embedded into textile composite laminate by cure monitoring using a high power WSFL. The cure monitoring of the cases with the striped FBG and the recoated FBG provided comprehensive understandings about the birefringence effect induced by the transverse stress. And these results allowed to consider a recoating method as an important tool to relieve birefringence.

  • PDF

Measurement of Transverse Strain Using Polarization Maintaining Fiber Bragg Grating Sensor (편광 유지 광섬유 브래그 격자 센서를 이용한 횡방향 변형률 측정)

  • Yoon, Hyuk-Jin;Kim, Dae-Hyun;Hong, Chang-Sun;Kim, Chun-Gon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.31 no.6
    • /
    • pp.30-35
    • /
    • 2003
  • In this paper, the transverse strain was measured using polarization maintaining fiber Bragg grating(PMFBG) sensor. PMFBG sensor was fabricated using phase mask and Excidmer laser. The reflected wavelength of PMFBG sensor had dual peaks due to intrinsic birefringence. To find the polarization axes, peak sensitivity was measured under compression test. The signal characteristics of PMFBG sensor were also examined in embedding condition. The embedded PMFBG sensor in epoxy block was loaded for the transverse strain measurement, The wavelength-swept fiber laser(WSFL) was used to construct the PMFBG sensor system. Experiments showed that the PMFBG sensor could successfully measure the transverse strain.

Papers : Simultaneous Measurement of Strain , Temperature , and Vibration Using Fiber Optic Sensor (논문 : 광섬유 센서를 이용한 변형률, 온도, 진동의 동시 측정)

  • Gang,Hyeon-Gyu;Bang,Hyeong-Jun;Hong,Chang-Seon;Kim,Cheon-Gon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.1
    • /
    • pp.44-48
    • /
    • 2002
  • In this paper, we demonstrated the simultaneous measurment of triple parameters such as strain, temperature, and vibration using single FBG/EFPI hybrid sensor. The FBG/EFPI sensor system for the strain and temperature measurement and the EFPI sensor system for the the vibration measurement were combined by a wavelength division multiplexer. The optical source of FBG/ EFPI sensor system is a wavelength-swept fiber laser(WSFL) and that of an EFPI sensor system is a laser diode. We performed the simultaneous measurement of thermal strain, temperature, and vibration of a aluminum beam placed in a thermal chamber and validated the efficiency of the constructed measurment system.

Efficient Execution Method of BPEL4WS Specification (BPEL4WS 명세의 효율적인 실행 방안)

  • 정종윤;류기열;이정태
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.04a
    • /
    • pp.484-486
    • /
    • 2004
  • 현재 웹 서비스의 결합을 기술하기 위한 다양한 방법들이 제시되고 있지만 XLANG과 WSFL의 장점을 수용한 BPEL4WS로 통합되고 있는 추세이다. BPEL4WS는 비즈니스 프로세스에 참여하는 웹서비스들간의 상호동작과 프로세스의 상태 정보를 기술할 수 있는 효과적인 방법을 제공한다. 그러나, BPEL4WS로 기술된 명세를 웹서비스화 하기 위한 실행 방안에 대한 연구는 미흡한 실정이다. 이에 본 논문은 비즈니스 프로세스에 내재된 워크플로우 그래프로부터 간략화 된 실행 그래프의 생성 방법을 제안한다. 또한 실행 그래프를 이용하여 BPEL4WS 명세의 병렬 및 분산 실행을 지원하는 구현 방안에 대해 논의한다.

  • PDF

Mode Sensing of a Composite Beam Using Fiber Bragg Grating Sensor (광섬유 브래그 격자 센서를 이용한 구조물의 모드 형상 측정)

  • 구본용;류치영;홍창선
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2000.04a
    • /
    • pp.163-166
    • /
    • 2000
  • Fiber Bra99 grating (FBG) sensor, one of the fiber optic sensor (FOS) offers lots of advantages for structural health monitoring due to its multiplexing capability. Also, it is proper to measure the structural vibration with no mass concentration effect. In this paper, we constructed two sensor arrays composed of 9 FBG sensors for the vibration and mode sensing of a composites beam. For an accurate measurement of wavelength shift, a signal processing board with an electric circuit based on time-interval counting was developed. This sensor system showed a good resolution of dynamic strain (<10${\mu}{\varepsilon}$). Using this sensor system, dynamic strains at 9 points of composite beam was measured and strain measured mode shape of the beam was calculated from the acquired strains and compared with numerical results by ABAQUS.

  • PDF

Technical Papers : Strain Monitoring of Filament Wound Composite Tank Using Fiber Bragg Grating Sensors (기술논문 : 광섬유 브래그 격자 센서를 이용한 필라멘트 와인딩된 복합재료 탱크의 변형률 모니터링)

  • Gang, Hyeon-Gyu;Park, Jae-Seong;Gang, Dong-Hun;Kim, Cheol-Ung;Yun, Hyeok-Jin;Jo, In-Hyeon;Hong, Chang-Seon;Kim, Cheon-Gon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.3
    • /
    • pp.130-138
    • /
    • 2002
  • 수압실험 동안 광섬유 브래그 격자(FBG) 센서를 이용하여 필라멘트 와인딩된 복합재료 탱크의 변형률을 모니터링하였다. 20개의 FBG 센서와 20개의 스트레인 게이지를 복합재료 탱크의 돔과 실린더 부분에 부착하였다. 광섬유 센서를 위한 고출력 광원으로는 파장 이동 광섬유 레이저(WSFL)을 이용하였다. 실험결과로부터, 많은 수의 센서를 필요로 하는 대형 구조물의 건전성 모니터링에 FBG 센서 시스템이 유용함을 확인할 수 있었다.

A Study on the Minimal Test Pattern of the RAM (RAM의 최소 테스트 패턴에 관한 연구)

  • 김철운;정우성;김태성
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1996.11a
    • /
    • pp.23-25
    • /
    • 1996
  • In this paper aims at studying the minimal test pattem of the RAM. This also propose a scheme of testing faults from the new fault model using the LLB. The length of test patterns are 6N(1-wsf), 9.5N(2-wsf), 7N(3-wsfl, 3N(4-wsf) operations in N-bit RAM. This test techniques can write into memory cell the number of write operations is reduced and then much testing time is saved. A test set which detects all positive-negative static t-ws faults for t=0, 1, 2, 3, 4 and detects all pattern sensitive fault in memory array. A new fault model, which encompasses the existing fault model Is proposed.

  • PDF

A Study on the Platform for the Intelligent Web Services: Strategies for Designing an Web Service Markup Language based on the Semantic Web (지능형 웹 서비스를 위한 플랫폼에 관한 연구: 시맨틱 웹 기반의 웹 서비스 마크업 언어 설계 전략들)

  • 양진혁;공유근;김지영;정인정
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2003.10a
    • /
    • pp.118-120
    • /
    • 2003
  • 현재 웹의 패러다임은 정적인 웹 페이지들의 모임에서부터 기업이 비즈니스를 더 신속하고 효율적으로 수행할 수 있게 하는 웹 서비스라는 동적인 웹으로 변화하고 있다. 이를 위하여 XML을 기반으로 하는 SOAP WSDL, UDDI, WSFL, XLANG, BPML. WSCL, WSCI 및 BPEL4WS 등과 같은 다양한 표준들과 더 불어 시맨틱 웹과 온톨로지를 기반으로 하는 컴퓨터에 의해서 자동으로 이해될 수 있는 방법으로 웹 서비스를 언급하는 UPML. WSMF 및 DAML-S와 같은 연구들이 최근에 대두되고 있다. 우리는 이 논문에서 시맨틱 웹을 기반으로 하는 지능형 웹 서비스를 가능하게 하기 위하여 새로운 시맨틱 웹 서비스 마크업 언어를 설계하기 위한 전략들을 제시한다. 이를 위하여 먼저 지능형 웹 서비스를 위한 서비스 마크업 언어의 요구사항들을 분석하고, 기존 웹 서비스를 위한 표준들과 연구들을 비교하고 분석한다. 그리고 효과적인 지능형 웹 서비스를 위한 새로운 마크업 언어의 설계를 위한 방법론을 제시한다. 이 논문의 연구결과들은 시맨틱 웹을 기반으로 하는 지능형 웹 서비스를 위한 마크업 언어의 필요성 및 기존 노력들의 문제점들을 지적함으로써 보다 개선된 웹 서비스를 위한 근간으로 사용될 수 있다. 뿐만 아니라 기존 연구들이 추후 보완해나가야 할 사항들을 언급함으로써 보다 향상된 지능형 웹 서비스의 실현을 가능하게 한다.

  • PDF

A study on the methodology for the automatic semantic web service composition problem (자동적인 시맨틱 웹 서비스 구성문제를 위한 방법론에 관한 연구)

  • Yang, Jin-Hyuk;Lee, Kang-Chan;Kim, Sung-Han;Min, Jae-Hong;Chung, In-Jeong
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2002.11c
    • /
    • pp.2265-2268
    • /
    • 2002
  • 인터넷 사용자들의 기하급수적인 증가와 웹 페이지의 폭발적인 증가로 인하여 정보공유를 위한 인터넷에서 효율적으로 원하는 정보를 발견하고 이용하기에 매우 힘든 상황에 처해있다. 따라서, 이러한 문제점들을 근본적으로 해결하기 위한 노력의 일환으로 기계가 이해하고 추론할 수 있는 시맨틱 웹이 등장하였다. 시맨틱 웹과 관련된 여러 가지 기술들 중 시맨틱 웹 서비스는 사용자에게 현재의 인터넷 환경에서 제공할 수 있는 서비스보다 향상된 고품질의 서비스를 제공하는 것을 목적으로 삼고 있다. 이러한 시맨틱 웹 서비스는 웹 서비스의 발견, 실행 및 구성으로 구성된다. 본 논문에서는 시맨틱 웹 서비스를 자동화하기 위한 노력의 일환으로서 시맨틱 웹에서 웹 서비스를 구성하는 문제에 대하여 언급한다. 시맨틱 웹 서비스 구성문제는 사용자의 요구사항을 충족시키기 위하여 다양한 웹 서비스들을 조합하는 문제이다. 그러나, WSFL, X-LANG 및 BPEL4WS 그리고, DAML-S와 같은 웹 서비스 구성문제에 대한 일련의 노력들에서는 사용자 요구사항에 대한 검증이나 서비스의 품질에 대한 사항들을 확인 및 제공할 수 있는 방법들이 없다. 따라서, 본 논문에서는 시맨틱 웹 서비스 구성문제와 관련된 상기와 같은 문제점들을 해결할 수 있는 방법론을 제시한다. 본 논문에서 제시된 방법론에서는 시맨틱 웹 구성문제를 제약만족문제로 변환함으로써 제약만족문제에 있어 늘리 알려진 다양한 알고리즘들을 활용할 수 있는 장점들이 있을 뿐만 아니라 사용자들의 요구사항에 대한 검증과 서비스의 품질을 확인할 수 있는 장점들이 있다.의 위상변화에 대한 적응성을 높일 수 있도록 한다. SQL Server 2000 그리고 LSF를 이용하였다. 그리고 구현 환경과 구성요소에 대한 수행 화면을 보였다.ool)을 사용하더라도 단순 다중 쓰레드 모델보다 더 많은 수의 클라이언트를 수용할 수 있는 장점이 있다. 이러한 결과를 바탕으로 본 연구팀에서 수행중인 MoIM-Messge서버의 네트워크 모듈로 다중 쓰레드 소켓폴링 모델을 적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나

  • PDF