• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1134-1139
• /
• 2003

Vibration problems are an intrinsic characteristic in a washing machine owing to rotation working mechanism. Therefore, a right comprehension of working principle and the analysis on dynamic behavior of a washing machine is essential to design anti-vibration or vibration reduction. In this paper, we choose two kinds of a washing machine: a suspension type pulsator/drum type washing machine. Each the structure and working principle of a washing machine is discussed briefly and the dynamic behavior of it is investigated, then, the vibration detection problems of transient or excessive vibration is tented in each category. Some vibration experimented results in a washing machine are presented also.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.539-544
• /
• 2003

The purpose of this study is to research source of soil which is available for non-detergent course, and to develop optimum non-detergent course of washing machine for water soluble soil. The water soluble soil such as grape juice, soy bean paste and soy sauce were easily removed from the fabric but the oil soluble soils such as sesame oil and steak sauce were insurfficiently removed in washing solution without detergent. In the absence of detergent, amount of residual soils increased linearly with increasing number of soiling and washing. To search optimum conditions of washing for non-detergent course, the effect of temperature, washing time and washing method on detergency of soil in non-detergent washing solution was examined. The optimum washing temperature and washing time for non-detergent course were about $40^{\circ}C$, and 7 minutes, respectively. And in the non-detergent washing solution, midterm drain-resupply of water during washing process was good for removal of water soluble soil.

• Fashion & Textile Research Journal
• /
• v.9 no.6
• /
• pp.671-678
• /
• 2007

Formulations of compact and supercompact heavy-duty detergents, which are being used widely around the world, differ from those of conventional heavy-duty detergents. Significant differences in composition exist between the compact detergents and the conventional detergents. The compact detergents have a higher content of surfactants, oxygen bleach and enzymes than the conventional detergents. We have studied to find the most effective washing conditions of artificially soiled cloths with a commercial, supercompact, heavy-duty detergent and a drum type washing machine which is becoming the preferred type in Korea. Moreover, we have studied the washing performance with an impeller type washing machine, which has heretofore been the most popular type in East Asia. With the drum-type washing machine, washing performances improved as the washing temperatures went up and the washing times were lengthened. Though the rate of soil removal with a double recommended dosage was higher than with the recommended amount at $20^{\circ}C$, the effects of the higher dosage decreased as the washing temperatures increased. Finally, the washing performances with the two different dosages were the same at $60^{\circ}C$. The washing performances at $40^{\circ}C$ with the recommended dosage for 90 minutes were the same as with the double recommended dosage for 45 minutes. The soil removal efficiencies with the impeller-type washing machine were much lower than those of the drum-type washing machine. The reasons for this were the higher bath ratio that led to the lower concentration of wash liquor, the shorter washing time, and the lower washing temperature.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.4
• /
• pp.343-351
• /
• 2014

Washing machines designed to clean laundry have been more widely used at home as they reduce household labor and boost the quality of life. Technological advances and better standards of life increase demand for laundry washing performance. Energy efficiency regulations and consumer demand for the larger trend, washing machine makers should be done in performance studies to reduce power, and water consumption and the load on power transmission devices. In this study, performance of a fully automatic washing machine with unconstrained transmission is analyzed through experiment and CFD simulation. It is found that the interaction between laundry and transmission change the washing behavior and affect washing performance with regard to the degree of freedom. The results obtained in this study can be used in developing new washing machine transmissions and make them more robust.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1231-1239
• /
• 2007

The purpose of this study was to investigate consumer's behaviors on the laundering of baby's clothing according to washing machine types. The subjects were 255 consumers with babies(0-2 years) in Korea. The data were collected with a self-administered questionnaire and analyzed by Chi-square test and multiple response analysis, and SPSS 12.0 statistics package was used. Consumers were separated into two groups according to washing machine types with general pulsator type and drum-type. Consumer's behaviors between general pulsator type group and drum-type group of washing machines were also examined. The results of this study were as follows. In the consumer satisfaction for washing machine, mostly drum-type group of consumers were satisfied with their washing machines. As the reasons of washing machine's dissatisfaction, noise, washing time and low washing efficiency were high in the pulsator type group, and washing time, noise and high price in the drum-type washing machine group. The consumers concerned about separation of clothing and laundering label while they washed laundry by washing machine. However, they didn't separate clothing because the small volume of laundry and a long washing time. The most interest and required thing of consumers was complete rinsing without any detergents used in washing as well as the removal of soils for baby's clothing regardless of two washing machine types. And they complained food soils like milk and mother's milk etc. were not completely removed by washing machine. As a whole the washing frequency of baby's laundry was once per a day and the rinsing also more than three times per a laundry. Most of the consumers used a private detergents for baby's clothing(detergents for baby's clothing only), and preferred to the high or boiled temperature washing as a desirable baby's laundering. There were significant differences between general pulsator type group and drum-type group of washing machines on the laundering of baby's clothing in this study.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.117-122
• /
• 2014

A novel method to reduce the vibration of drum type washing machine is proposed. Recently, as the capacity of the drum-type washing machine gets expanded and its washing performance is improved, its market share is increasing in the whole world. But, the capacity of washing machine is limited because of door size and built-in washing machine size. The vibration of washing machine is caused by unbalanced cloths in high spining drum, and the displacement of tub is maximized at transient range about 3 Hz(180 rpm). Previous researches were concerned about steady-state vibration in spinning. In this study, concerned about transient vibration and the displacement of tub is decreased by using gyroscope system. Mutibody dynamic model of washing machine include gyroscope is designed and the vibration of tub have been reduced by 44.7 % over original.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.251-261
• /
• 1997

According to consumer's washing behavior, the washing efficiency of three different types of washing machines-pulsator, agitator, and drum was studied. Their detergency, rinsing efficiency, and the degree of fabric damage, tangle, and wrinkle were evaluated. The results showed that efficient washing capacity was different from the specified capacity of washing machine. Detergency and rinsing efficiency frere apparently decreased when more than 50% of capacity was loaded in washing machine of pulsator type, and 80% for agitator or drum types. They were also affected by detergent adding methods, and decreased in the order of water-detergent-washing load> washing load-detergent-water> washing load-water-detergent. Rinsing efficiency was significantly improved when the rinsing temperature was set above washing temperature. In addition, it was revealed that detergency, fabric damage, wrinkle, and tangle were highly correlated. The relationships between detergency and tangle were different for different types of washing machine. Positive relationships were found for agitator and drum types, whereas negative for pulsator type.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.20-28
• /
• 2014

Most washing machines are now produced as a drum-type, where a washing drum mounted on a suspension system with springs and dampers, to minimize the transmittance of the vibration from the drum to the cabinet. The purpose of this paper is to develop optimized suspension system of the drum washing machine which minimizes transmission of disturbing vibration and force. In this paper, a method for optimizing suspension system of the drum washing machine is presented using ADAMS. The design variables to optimize are extracted using Sequential Quadratic Programming(SQP) in ADAMS. To evaluate optimized spring constants and damping coefficients of the drum washing machine, simulation was done to compare the vibration attenuation performances before and after the optimization. The results of simulation show that the optimized suspension system has better performance than before the optimization.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.134-138
• /
• 2006

The washing efficiency of two types of washing machine- drum(drum washing) and drum using steam jet system(steam drum washing) was studied. The purpose of this paper is to clarify the performance of new steam drum washing. The relationship between washing temperature and washing efficiency(reflectance(%)) by soil removal, and that between washing temperature and electric energy consumption, Fabric damage evaluated by Danish wear method, Fabric shrinkage(%) during laundering were investigated, and compared with those in drum washing machine. Washing efficiency of steam drum washing according to washing temperature is better than that of drum washing. Electric energy consumption and fabric damage in steam drum washing are lower than those of drum washing. Fabric damage increased as washing temperature increased. Shrinkage of fabrics in steam drum washing and drum washing are about same. Therefore, we assumed that in the case of steam drum washing using steam jet system, washing efficiency remarkably increased, and fabric damage decreased, even with a lot of saving in given electric energy and water used.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.996-1001
• /
• 2006

Automatic washing machines have been improved and popularized steadily since the first electric washing machine was produced in the early 1900's. Appliance industry has tried to obtain the performance of washing machine with large capacity, high energy efficiency, low vibration and low noise levels. As the installation peace of a washer becomes closer to the living space, vibration and noise problems become more important challenges. In general, a washing machine has four legs to support its body. Four legs of the washing machine should be attached on a floor. If not so, it may cause severe vibration or walking in the spin-drying process. Unfortunately, the floor of an ordinary house is bumpy in general, and the consumers will not accept bolting washing machines to a foundation; moreover, sometimes they move the location of their washing machines to utility rooms or bath rooms or kitchens and don't care for leveling the legs exactly. In this study, we devise an auto-leg system that prevents the occurrence of abnormal vibration and walking of washing machines. It is simply composed of a spring and a friction damper. Some experiments are implemented to show the dynamic characteristics of the three-dimensional auto-legged washing machine model that is located on the even or uneven ground. A spring parameter is optimized to adjust the length of the auto-leg system automatically up to 10 mm irregularity, and the friction damper is designed to decrease a resonance induced by the spring of the auto-leg system. Some numerical results show that placing the proposed auto-leg system in a washing machine makes good performance with low vibration, as well as low noise, regardless of the unevenness of the floor.