• Plant Resources
• /
• v.3 no.3
• /
• pp.226-232
• /
• 2000

The availability of enokitake cultural waste for Lentinus edodes cultivation was investigated, although hardwood sawdust has traditionally been used as a substrate for this fungus. Firstly, physiochemical characteristics of cultural waste were analysed. Secondly, mycelial growth characteristics and fruiting yields of L. edodes on waste treated in some methods were determined. Physiochemical characteristics of enokitake cultural waste showed that the millwaste complex was a little degraded by enokitake fungus and suggested the probability that most component lost by enokitake could be rice bran. Mycelia of L. edodes grew and fruited well on waste supplemented by fresh rice bran and Quercus sawdust although didn't on waste only. Mycelial growths of these fungi on waste were accelerated when supplemented by rice bran to the percent of 40(w/w) but decreased or suppressed at above ratios(30, 40%, w/w). Supplementations of oak sawdust at above 40%(w/w) of the waste and rice bran at 20%(w/w) of the sawdust allowed such a good mycelial growth as to be selected as a pertinent mixing ratio for fruiting medium. A fruiting yield on enokitake cultural waste supplemented by oak sawdust (at 40% of the waste, w/w) and rice bran (at 20% of the sawdust, w/w) was not inferior to that on oak sawdust supplemented by rice bran only (at 20% of the sawdust, w/w). These results indicated strongly the potentiality of enokitake cultural waste as raw materials for shiitake cultivating substrates.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.1
• /
• pp.37-42
• /
• 2009

This paper describes the fuel oil characteristics of mulching waste vinyl by indirect heating emulsion system. For the emulsion experiment of waste vinyl, the system is composed of melting furnace, the 1th pyrolysis furnace, and the 2nd pyrolysis furnace. The mulching waste vinyl is used for the fuel oil characteristics analysis of mulching waste vinyl. The refined oil, gasoline, and diesel oil are extracted and quantified to analysis the fuel oil characteristics. From the results of experiments, it has been shown that the production of fuel oil from mulching waste vinyl is possible using the emulsion system.

• Nuclear Engineering and Technology
• /
• v.41 no.4
• /
• pp.477-492
• /
• 2009

In this paper, we discuss the experiences during the preparation of the Wolsong Low- and Intermediate-Level Radioactive Waste Disposal Center. These experiences have importance as a first implementation for the national LILW disposal facility in the Republic of Korea. As for the progress, it relates to the area of selected disposal site, the disposal site characteristics, waste characteristics of the disposal facility, safety assessment, and licensing process. During these experiences, we also discuss the necessity for new organization and change for a radioactive waste management system. Further effort for the safe management of radioactive waste needs to be pursued.

• Journal of the Korean Society of Costume
• /
• v.66 no.4
• /
• pp.61-76
• /
• 2016

The importance of environment has come into focus recently, and this has led to increased attention on zero waste fashion design as a method to minimize waste from the production stage of fashion goods. The purpose of this study was to analyze the development method types and the characteristics of zero waste fashion design in order to study the eco-friendly meanings of zero waste fashion design, as well as its meaning as creative design development methods. Through the case analysis of recent designs, the design types of zero waste fashion design were largely classified into cut and sew, folding, draping, and non-woven types, and they were classified again according to the characteristics of production process. According to the result of analyzing fashion design development methods of zero waste fashion designs based on the process of completing design, they were classified into pattern making, computer programming, draping, assembling of the unit, and non-woven moulding methods, and the aspect of combined use rather than utilization of one method appeared. Formative characteristics of zero waste fashion design included decorative beauty, formative beauty, and transformable beauty and its design characteristics were fortuity and unexpected properties, breaking stereotypes, structural flexibility and futuristic innovation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.774-781
• /
• 2009

The purpose of this study was to research on compressibility characteristics of waste tire powder-added lightweight soil(TLS) for recycling dredged soil, bottom ash and waste tire. The TLS used in this experiment consists of dredged soil, cement, waste tire powder and bottom ash. Test specimens were prepared with various content of waste tire powder ranged from 0% to 100% at 25% intervals by the dried weight of dredged soil. Several series of one-dimensional consolidation tests were carried out. Based on the experimental results, as the waste tire powder increased, the swelling index of TLS increased. The compression index and swelling index of the TLS with bottom ash content showed lower value than without bottom ash. Then, compressibility characteristics of TLS were strongly influenced by mixing conditions of waste tire powder content and bottom ash content.

• Geomechanics and Engineering
• /
• v.28 no.6
• /
• pp.547-557
• /
• 2022

Dune sands are poorly graded collapsible soils lacking fines. This experimental study explored the technical feasibility of sustainable invigoration of fine waste materials to improve the geotechnical properties of dune sand. The fine waste considered in this study is fine marble waste. The fine waste powder was mixed with dune sand at different contents (5, 10,15, 20, 25, 50%), where the gradation, void ratio, compaction, and shear strength characteristics were assessed for each fine marble waste -dune sand blend. The geotechnical properties of the dune sand-fine marble waste mix delineated in this study reveal the enhancement in compaction and gradation characteristics of dune sand. According to the results, the binary mixture of dune sand with 20% of fine marble waste gives the highest maximum dry density and results in shear strength improvement. In addition, a numerical study is conducted for the practical application of the binary mix in the field and tested for an isolated shallow foundation. The elemental analysis of the fine marble waste confirms that the material is non-contaminated and can be employed for engineering applications. Furthermore, the numerical study elucidated that the shallow surface replacement of the site with the dune sand mixed with 20% fine marble waste gives optimal performance in terms of stress generation and settlement behavior of an isolated footing. For a sustainable mechanical performance of the fine marble waste mixed sand, an optimum dose of 20% fine marble waste is recommended, and some correlations are proposed. Thus, for improving dune sand's geotechnical characteristics, the addition of fine marble waste to the dune sand is an environment-friendly solution.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.247-253
• /
• 1997

This study performed the experimental research comparing mechanical characteristics of the concrete replaced by the waste glass powder with the non-replaced concrete. The experimental parameters are kinds of the waste glass powder and replacement rate of the waste glass powder on the cement. As as result, the slump value, the flow value and the amount of air were decreased as the waste glass powder replacement rate increased, and the strength was increased when the waste glass powder replacement rate is 5%~15%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.05a
• /
• pp.175-176
• /
• 2017

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.627-639
• /
• 2018

Waste management in Jeju Province, Korea, has recently emerged as an urgent problem. The increasing waste discharge requires more landfills but, since it is an island, the available land is restricted. Accordingly, an efficient waste management urgently requires environmentally sustainable policies. In this article, the waste discharge characteristics (such as the amount of waste, its composition, etc.) of Jeju Province have been compared with those in the rest of Korea. The current industrial waste management of two cities on the Island, Jeju City and Seogwipo City, has been also analyzed to suggest policies for an efficient management. The local government's endeavor to enhance environmental awareness of the community has been known to reduce the private cost of policy compliance, and have individuals recognize the results of their policy compliance. Policies to achieve the above are then proposed.

• Journal of the Korean Society of Combustion
• /
• v.7 no.2
• /
• pp.42-48
• /
• 2002

Experiments on burning process of the industrial wastes were performed on a nozzle-type grate in the industrial waste incinerator with a capacity of 160 kilograms per hour. The temporal variations of temperatures and concentrations of the exhaust gas were measured and analyzed. The synthetic leather waste with the moisture content less than 2% was used. The experimental results show that the CO concentration in the exhaust gas exceeds the limit, 600 ppm, and the gas temperature fluctuates too much when 8 kg of waste was supplied every 3 minutes, equivalent to the capacity of 160kg per hour. That is a typical burning mode of this high-calorific industrial waste. When the smaller unit waste input, 6kg per every 2 min 15 seconds was supplied, we could reduce the fluctuations of the furnace temperature and improve the exhaust emissions, especially the CO concentration.