• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.529-542
• /
• 2019

Nowadays, drying methods for municipal solid waste quality improvement have been adopted in the developed and developing countries to valorize wastes for a renewable energy source, reduce dependency on fossil fuel and keep safer disposal at landfills. Among them, biodrying, biostabilization, thermal drying and solar drying are the most common. Drying of municipal solid waste could offer several environmental and economic benefits. Therefore, this review highlighted the drying methods for municipal solid waste quality improvement around the world and compared them based on the reduction of moisture, weight and volume of municipal solid wastes against drying temperature and time by using statistical analysis. It was observed that the drying temperature of different drying methods accounted for 115 ± 40℃ for thermal drying, 59 ± 37℃ for solar drying, 55 ± 15℃ for biodrying and 58 ± 11℃ for biostabilization. Among the drying methods, thermal drying provided the shortest drying time. The moisture reduction, weight reduction, volume reduction and heating value increase of municipal solid waste could vary with drying temperature and time. Finally, the benefits and drawbacks of different drying methods were specified, and recommendations were made for the future efficient drying.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.177-181
• /
• 2015

Food waste has been widely considered as a recycling resource to be applied to agricultural lands due to the effects of organic matter and nutrient for plant productivity. but the maturity and salt concentration in the compost produced from food waste processing facilities should be considered firstly, which was little information on compost quality produced from food waste treatment facility. In this study, we examined actual situation of food waste processing facility on the composting of food waste and evaluated the characteristics of composts produced from food waste processing facilities. The quality of composts was analyzed on the basis of the criteria of fertilizer processing manual. The 46% of food waste treatment facility registered composting produced actually the compost mixed with food waste or animal waste. The compost maturity and salt concentration as indicators of the quality of compost were not met 46.8% of composts collected from food waste processing facilities to the criteria of fertilizer processing manual. Also, 15.6%(moisture) were not satisfied with the criteria. In conclusion, the compost produced from food waste processing facilities is firstly required with better compost maturity and reduced salt concentration in order to use to agricultural lands as an amendment.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.414-422
• /
• 2022

Presented in this paper is a methodology for combining a Bayesian statistical approach with Data Quality Objectives (a structured decision-making method) to provide increased levels of confidence in analytical data when approaching a waste boundary. Development of sampling and analysis plans for the characterisation of radioactive waste often use a simple, one pass statistical approach as underpinning for the sampling schedule. Using a Bayesian statistical approach introduces the concept of Prior information giving an adaptive sample strategy based on previous knowledge. This aligns more closely with the iterative approach demanded of the most commonly used structured decision-making tool in this area (Data Quality Objectives) and the potential to provide a more fully underpinned justification than the more traditional statistical approach. The approach described has been developed in a UK regulatory context but is translated to a waste stream from the Fukushima Daiichi Nuclear Power Station to demonstrate how the methodology can be applied in this context to support decision making regarding the ultimate disposal option for radioactive waste in a more global context.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.107-110
• /
• 2006

In this study, recently it is urgently required that recycle promotion of construction and demolition waste concrete because urban development is accelerated and redevelopment project is rapidly expanded, production quantity of construction and demolition waste concrete is being increased. On the other hand, it is urgently required that problem solution of demand and supply unbalance of fine aggregate because the sea sand is restricted by exhaustion of river sand and intensification of environment influence evaluation. Therefore, it tries to conform in time necessity, there is the objective of this study to provide the fundamental data about the re-application as the comparison and analysis the quality present condition for the recycled fine aggregate in the inside and outside of the country. At the same time it will be able to improve the quality of the recycled fine aggregate waste as investigating the physical nature and a quality present condition of the recycled fine aggregate from construction waste.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.167-168
• /
• 2020

In order to expand the material recycling of waste plastics made of composite materials, it is necessary to develop the use of material recycling products and to secure their quality stability. In this paper, as a basic study to secure the stability of the quality of household waste plastic material recycling products, the quality characteristics of recycled materials according to the production period were compared and reviewed. In addition, the average tensile strength of the recycled products by production period for 4 months was 12.33 MPa, and the average density was 1.35 g/m3.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.256-260
• /
• 2003

The paper is aiming at presenting the proper treatment method and procedures of ILW waste to both waste generators and acceptor so that the waste characteristics are satisfied with the WAC(Waste Acceptance Criteria) and as a result, the disposal facility would be operating safely. The ILW generators are responsible for reducing the volume of waste, treating and packaging the waste in order to meet the WAC, and acceptor has an obligation of inspecting the waste in conformity with the acceptance procedure established by regulation. Recently, a number of countries including France and USA examine the disposal acceptability of ILW waste by the WCP(Waste Package Quality Certification Program).

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.604-606
• /
• 1999

Solid animal wastes in Japan are treated mainly by composting. The composting process under controlled conditions is able to convert the wastes into high-quality organic fertilizer. Various types of composting facilities with/without forced aeration and turning device are available. Characterization of the maturing process during composting was studied, to improve the quality of compost and to make the degree of maturity. Recycling of animal wastes as compost without any environmental pollution will be closely related to the development of sustainable agriculture with organic fertilizer in Japan.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.27-35
• /
• 2009

To solve resource exhaustion and waste management problems caused by mass consumption, there are many efforts to change from resource consumption system to recycling system. Specially, interests about management of construction waste have increased, but efficient recycling system of waste concrete is not established yet. In this study, high quality recycled aggregate processing circuit was developed to recycle waste concrete. From the waste concrete which is a hydrated compound with coarse aggregate, fine aggregate, and cement material, high quality recycled coarse aggregate for concrete making was produced by autogenous milling and heat pretreatment method. After then, refinement process was performed to separate fine aggregate and cement material from waste concrete fines by sink float separation and hindered-settling separation. As a result, high quality recycled aggregate was produced from waste concrete by developed processing circuit.

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.556-565
• /
• 2003

A quality assurance safety assessment database, called QUARK (QUality Assurance Program for Radioactive Waste Management in Korea), has been developed to manage both analysis information and parameter database for safety assessment of low- and intermediate-level radioactive waste (LILW) disposal facility in Korea. QUARK is such a tool that serves QA purposes for managing safety assessment information properly and securely. In QUARK, the information is organized and linked to maximize the integrity of information and traceability. QUARK provides guidance to conduct safety assessment analysis, from scenario generation to result analysis, and provides a window to inspect and trace previous safety assessment analysis and parameter values. QUARK also provides default database for safety assessment staff who construct input data files using SAGE(Safety Assessment Groundwater Evaluation), a safety assessment computer code.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2012

Recently the market of the food waste disposer has increased. Therefore, many companies in the development of food garbage disposer has been increasing interest. In this study, we used QFD (Quality Function Development) to find out the quality factors for the development of the food waste disposer reflecting the consumer needs. HOQ (House Of Quality) showing the correlation between consumer characteristic and engineering characteristic was written by investigating the consumer needs based on the consumer complaints and survey. In addition, we generated the CTQ (Critical To Quality) reflecting the weighting of the importance of the parts. As the research result, the important quality factors for the food garbage disposer were the grinding capability, drying, and odor emission features. The crushing motor associated with grinding and dehydration appeared as the most important quality factors among the parts. Second thing was the fan motor associated with odor. The findings will be able to contribute to the development of the food waste disposer reflecting the consumer needs.