• Journal of the Korean Data and Information Science Society
• /
• v.19 no.4
• /
• pp.1465-1476
• /
• 2008

In recent years wavelet methods have been focused on block shrinkage or thresholding approaches to accounting for the sparseness of the wavelet representation for an unknown function. The block shrinkage or thresholding methods have been developed in both of classical methods and Bayesian methods. In this paper, we propose a Bayesian approach to selecting wavelet basis functions at each resolution level without MCMC procedure. Simulation study and an application are shown.

• Structural Engineering and Mechanics
• /
• v.30 no.6
• /
• pp.699-712
• /
• 2008

The effectiveness of wavelet transform in detecting delamination damages in multilayered composite beams and plates is studied here. The damaged composite beams and plates are modeled in finite element software ABAQUS and the first few mode shapes are obtained. The mode shapes of the damaged structures are then wavelet transformed. It is observed that the distribution of wavelet coefficients can identify the damage location of beams and plates by showing higher values of wavelet coefficients at the position of damage. The effectiveness of the method is studied for different boundary conditions, damage location and size for single as well as multiple delaminations in composite beams and plates. It is observed that both discrete wavelet transform (DWT) and continuous wavelet transform (CWT) can detect the presence and location of the damaged region from the mode shapes of the structures. DWT may be used to approximately evaluate the size of the delamination area, whereas, CWT is efficient to detect smaller delamination areas in composites.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.11 s.116
• /
• pp.1149-1157
• /
• 2006

Donoho et al. suggested a wavelet thresholding denoising method based on discrete wavelet transform. This paper proposes an improved denoising method using a new thresholding function based on translation-invariant wavelet for underwater acoustic measurement. The conventional wavelet thresholding denoising method causes Pseudo-Gibbs phenomena near singularities due to the lack of translation-invariant of the wavelet basis. To suppress Pseudo-Gibbs phenomena, a denoising method combining a new thresholding function based on the translation-invariant wavelet transform is proposed in this paper. The new thresholding function is a modified hard-thresholding to each node according to the discriminated threshold so as to reject unknown external noise and white gaussian noise. The experimental results show that the proposed method can effectively eliminate noise, extract characteristic information of radiated noise signals.

• Journal of the Korean Mathematical Society
• /
• v.42 no.2
• /
• pp.305-334
• /
• 2005

The objective of this study is to analyze the decay characteristics of the hat interpolation wavelet coefficients of some smooth functions defined in a two-dimensional space. The motivation of this research is to establish some fundamental mathematical foundations needed in justifying the adaptive multiresolution analysis of the hat-interpolation wavelet-Galerkin method. Though the hat-interpolation wavelet-Galerkin method has been successful in some classes of problems, no complete error analysis has been given yet. As an effort towards this direction, we give estimates on the decaying ratios of the wavelet coefficients at children interpolation points to the wavelet coefficient at the parent interpolation point. We also give an estimate for the difference between non-adaptively and adaptively interpolated representations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.431-434
• /
• 2003

As a wavelet transform which is presented as a new technique of signal processing field has time and frequency localization capabilities, it's possible for multiresolution analysis as well as easy to analyze various signal. So it is being applied in many fields recently. And when two wavelet base were designed to form Hilbert transform pair, wavelet pair show superior performance than the existing DWT(discrete wavelet transform) in data detection of pulse type. Therefore in this paper, we detected position of impulse noise by using two dyadic wavelet base which is designed by truncated coefficient vector.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.135-141
• /
• 1999

Recently, advance signal analysis which is called "Time-Frequency Analysis" has been developed. Wavelet and Wigner Distribution are used to the method. Wavelet transform(WT) is applied to time-frequency analysis of waveforms obtained by an ultrasonic pulse-echo technique. The Gabor function is adopted as the analyzing wavelet. Wavelet analysis method is an attractive technique for evolution of material characterization evoluation. In this paper, the feasibility of suppression of ultrasonic background noise signal using WT has been presented. These results suggest that ultrasonic background noise ginal can be suppressed and enhanced even for SNR of 20.8 dB. This property of the WT is extremely useful for the detecting flaw echos embedded in background noise.und noise.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.272-275
• /
• 1999

In this paper, a wavelet transform-based adaptive interference excision scheme using the adaptive algorithm which suppresses narrow band interference in the wavelet transform domain for the direct spread modulation system application, is introduced. Using the Monte-Carlo simulation, the bit error probabilities of the direct spread communication systems with the excision systems of two kinds of Daubechies wavelets (db2, db8) in the transform domain, are analysed. With these results, it is shown that the performance of a system depends on the characteristics of wavelet being used. And with this scheme, we expect effective improvements in the direct spread communication system performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.31-37
• /
• 1996

This Paper is concerned with effective signal identification method for tool breakage and micro chipping using discrete wavelet transform of feed motor current in milling operations. The wavelet transform uses an analyzing waveletfunction which is localized in both frequency and time domain to detect subtle time localized changes in input signals. The changing pattern of wavelet coefficient is continuously compared to detect tool breakage and micro chipping over one spindle revolution. The results indicate that the wavelet transform can identify tool failure with much greater sensi- tivity than the time domain monitoring and frequency domain monitoring such as FFT. Experimental results are presented to support the proposed scheme.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1244-1249
• /
• 1995

Wavelet transform technique is applied to two important electromagnetic problems:1) to analyze the frequency-domain radar echo from finite-size targets and 2) to the integral solution of two- dimensional electromagnetic scattering problems. Since the frequency- domain radar echo consists of both small-scale natural resonances and large-scale scattering center information, the multiresolution property of the wavelet transform is well suited for analyzing such ulti-scale signals. Wavelet analysis examples of backscattered data from an open- ended waveguide cavity are presented. The different scattering mechanisms are clearly resolved in the wavelet-domain representation. In the wavelet transform domain, the moment method impedance matrix becomes sparse and sparse matrix algorithms can be utilized to solve the resulting matrix equationl. Using the fast wavelet transform in conjunction with the conjugate gradient method, we present the time performance for the solution of a dihedral corner reflector. The total computational time is found to be reduced.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1E
• /
• pp.13-19
• /
• 1999

This paper introduces an adaptive wavelet transform based on the lifting scheme, which is applied to signal denoising. The wavelet representation using orthogonal wavelet bases has received widespread attention. Recently the lifting scheme has been developed for the construction of biorthogonal wavelets in the spatial domain. Wavelet transforms are performed through three stages: the first stage or Lazy wavelet splits the data into two subsets, even and odd, the second stage calculates the wavelet coefficients (highpass) as the failure to interpolate or predict the odd set using the even, and the third stage updates the even set using neighboring odd points (wavelet coefficients) to compute the scaling function coefficients (lowpass). In this paper, we adaptively find some of the prediction coefficients for better representation of signals and this customizes wavelet transforms to provide an efficient framework for denoising. Special care has been given to the boundaries, where we design a set of different prediction coefficients to reduce the prediction error.