• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.131-143
• /
• 2012

This paper introduces the double-density discrete wavelet transform using 3 direction separable processing method, which is a discrete wavelet transform that combines the double-density discrete wavelet transform and quincunx sampling method, each of which has its own characteristics and advantages. The double-density discrete wavelet transform is nearly shift-invariant. But there is room for improvement because not all of the wavelets are directional. That is, although the double-density DWT utilizes more wavelets, some lack a dominant spatial orientation, which prevents them from being able to isolate those directions. The dual-tree discrete wavelet transform has a more computationally efficient approach to shift invariance. Also, the dual-tree discrete wavelet transform gives much better directional selectivity when filtering multidimensional signals. But this transformation has more cost complexity Because it needs eight digital filters. Therefor, we need to hybrid transform which has the more directional selection and the lower cost complexity. A solution to this problem is a the double-density discrete wavelet transform using 3 direction separable processing method. The proposed wavelet transformation services good performance in image and video processing fields.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.169-173
• /
• 2001

This study presents the results of decoupling of free decay roll test data by discrete wavelet transform. Free roll decay test was performed to decide the coefficients of damping terms in equation of motion. During the experiment, a slight yaw motion was found while the model was in the free roll decay motion. Discrete wavelet transform was applied to the signal to extract the pure roll motion. The results were compared to those of the Fourier transform. DWT was able to decouple the two signals efficiently while the Fourier transform was not.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제1권1호
• /
• pp.24-28
• /
• 2001

Wavelet transforms are used for implementing digital watermarking methods in the frequency domain. In this paper, we construct the digital watermarking using various wavelet transforms such as the Daubechies transform, Coiflets transform, Symlets transform and the biorthogonal transform, and we compare each digital watermarking method with the others. We investigate the preservation of the watermark after the data compression attack based on the discrete on the discrete cosine transform. We show that the biorthogonal wavelet, denoted by bior3.5, has the best performance among the wavelet types we selected in an experiment.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.33-39
• /
• 2003

Wavelet transform analysis results show a spectrum energy distribution of CWT along scale factors distinguish the partial, full and over penetration in a electron beam welding by analyzing the curve of spectrum energy at small scale, middle and large scale range, respectively. Two types of signals collected by Ion collector and x-ray sensors and analyzed. The acquired signals from sensors are very complicated since these signals are very closely related the dynamics of keyhole which interact the very high density energy with materials during welding. The results show the wavelet transform is more effective to diagnosis than Fourier Transform, further for the general welding defects which are not a periodic based, but a transient, non-stationary and time-varying phenomena.

• 산업기술연구
• /
• 제19권
• /
• pp.403-408
• /
• 1999

An efficient method is developed for classifying fingerprint data based on 2-D discrete wavelet transform. Fingerprint data is first converted to a binary image. Then a multi-level 2-D wavelet transform is performed. Vertical and horizontal subbands of the transformed data show typical energy distribution patterns relevant to the fingerprint categories. The proposed method with moderate level of wavelet transform is successful in classifying fingerprints into 5 different types. Finer classification is possible by higher frequency subbands and closer analysis of energy distribution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1918-1920
• /
• 2000

In this paper, acoustic signals in GIS were analyzed by using wavelet transform and FFT to distinguish sound source caused by collision of particles and partial discharges. As a result, the analysis using wavelet transform was more accurate than that using FFT. Therefore, wavelet transform was useful technique to analyze the acoustic signals in GIS.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.269-273
• /
• 2000

This paper describes Active Noise Control (ANC) using Discrete Wavelet Transform (DWT) Domain Least Mean Square (LMS) Method. DWT-LMS is one of the transform domain input decorrelation LMS and improves the convergence speed of adaptive filter especially when the input signal is highly correlated. Conventional transform domain LMS's use Discrete Cosine Transform (DCT) because it offers linear band signal decomposition and fast transform algorithm. Wavelet transform can project the input signal into the several octave band subspace and offers more efficient sliding fast transform algorithm. In this paper, we propose Wavelet transform domain LMS algorithm and shows its performance is similar to DCT LMS in some cases using ANC simulation.

• 한국음향학회지
• /
• 제20권5호
• /
• pp.21-27
• /
• 2001

기어 시스템의 충격음과 충격 신호는 대개 기어의 결함과 관련이 있다. 그래서 이러한 충격음과 충격 신호는 기어 시스템의 건전성 감시의 주요 요소로 사용되어진다. 본 연구에서는 이런 충격음과 충격 신호를 효율적으로 추출해 내기 위해 스파이크 웨이블렛 변환을 이용하는 방법을 제안한다. 스파이크 웨이블렛 변환은 기존에 제안된 연속 웨이블렛 변환의 한계점인 임의의 영역에서의 시간-주파수 분해능의 스케일 변수에 대한 선형성을 보완하여 비 선형적으로 이것을 조절할 수 있게 하였다. 이로 인해서 스파이크 웨이블렛 변환은 관심 주파수를 기준으로 연속 웨이블렛 변환보다 고주파 영역에서는 시간 분해능이 향상되고 동시에 저주파 영역에서는 주파수 분해능이 향상되어 기어 결함에 대한 정보 손실 없이 기어의 결함 위치를 보다 명확히 판단할 수 있는 장점을 가진다. 또한 본 연구에서는 상단 절손의 결함을 갖는 기어에 대한 실험을 통해 본 연구에서 제안하는 스파이크 웨이블렛 변환의 유용성을 검증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.409-412
• /
• 2003

In this paper, the encoder architecture of 3-D wavelet transform based on lifting scheme is designed. Architecture, here, 3 level wavelet transform for spatial decomposition and 2 level wavelet transform for temporal decomposition is adopted with efficient computation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1387-1390
• /
• 1997

In this paper we propose a novel way to restore degraded image using wavelet transform & filterbank. First, we devide a degraded image into 4-suband images using UDWT(Undecimated Wavelet Transform), and then use a proper CLS (Constrained Least Square) filter in each subband. Using a proper CLS filter ineach subband, we can save high grequency components of original image. We reconstruct a restored image from the downsampled subband images using wavelet tansform. Even though there is a trade-off between ISNR and calculation loads, we reduce the calculation loads by using wavelet transform in reconstruction with a negligible degradatiion in ISNR.