• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.172-180
• /
• 2006

Although there existed many types of manual/power hybrid wheelchairs, their use was not widespread because of their inconvenience in converting drive system and in folding frames. To carry a wheelchair in the car or to convert driving methods, some hard work of disassembling or exchanging wheels was required for most of currently available hybrid wheelchairs. In this study, the standard foldable manual wheelchair was reformed to a power wheelchair by installing the newly developed Axial Flux Permanent Magnet(AFPM) type of brush less direct current(BLDC) motor on each rear hub of wheelchair. This wheelchair could be driven by manual or electric power without exchanging. wheels, thus no additional work was needed for carriage or for power conversion. The developed wheelchair was evaluated for durability, stability, maneuverability, cost, and reliability in accordance with the Korean standards. The results indicated that the developed hybrid wheelchair was good enough for commercialization comparing to other imported wheelchairs.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.179-187
• /
• 2004

In this study, for a safety assessment of wheelchair occupant in frontal and side impact of wheelchair loaded vehicle, a sled impact test was perfumed. Each test was carried out total 6 times, by using Hybrid III 50th-percentile male dummy in light weight and electric wheelchair. We estimate MC(Motion Criteria), CIC(Combined Injury Criteria), HIC(Head Injury Criteria), HNIC(Head and Neck Injury Criteria) based on measured data. Through this study, we make an assessment of risk analysis of wheelchair occupant and wheelchair. Through this study, safety standard of wheelchair is to be evaluated.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.8-15
• /
• 2019

Wheelchair users experience difficulty when using transportation. This is because wheelchair users must use transportation means together with wheelchairs. Therefore, in this paper, we developed a wheelchair storage system for passenger's car trunk. The mechanism is designed to allow a wheelchair and the device to be housed simultaneously in the narrow space of the trunk of the sedan passenger car. Additionally, this wheelchair storage system has implemented an initial load reduction mechanism that can mechanically reduce the initial load. This wheelchair storage system verified the system's operability through the production of the prototype. This system was actually installed in the trunk of the sedan passenger's car to verify the storage process. The operation and storage process of the wheelchair storage system was been perfectly verified. This wheelchair storage system will help a lot of self-driver or an assistant (female or elderly) who use wheelchairs.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.17-27
• /
• 2020

Purpose: The purpose of this study is to identify the difference in toilet approach way by wheelchair users according to the direction of the door and to suggest the layout of the toilet rooms most accessible to the wheelchair users. Methods: Survey to wheelchair users about approach to toilet have been conducted for the data collection. 90 answers have been analyzed statistically by SPSS 19.0 program. Results: The conclusions of this study are as follows. Firstly, spinal cord disorders prefer diagonal approach and lateral approach to the toilet, but brain lesions prefer diagonal approach and frontal approach to toilet. Secondly, the manual wheelchair users prefer the diagonal approach and the lateral approach to the toilet, and the electric wheelchair users has a different approach way to the toillet depending on the direction of the door. Finally, the layout of accessible toilets have to be designed for the diagonal approach to toilet, which is most preferred by wheelchair users. Implications: The toilet approach varies according to the disability types and the wheelchair types. Therefore, the size of accessible toilets should be larger than now considering the access of variety wheelchair users.

• Korean Institute of Interior Design Journal
• /
• v.14 no.4 s.51
• /
• pp.54-61
• /
• 2005

The purpose of this study is to examine the physical factors of work environment and to establish the evaluation factors for office design for wheelchair users. This study is based on the existing research for office environmental factors; and then clarifies the physical factors that are suitable for circumstances of wheelchair users. These factors are composed three physical factors which are space, furniture arrangement, and ambient condition and then each of these factors has detailed several elements. Futhermore, comparing physical factors between a non-wheelchair user and a wheelchair user with work environment is analyzed on the assumption using the system furniture on the market. This study is expected to be used as basic information to provide the way of improving office space plan for wheelchair user in workplace. This resource can serve as a checklist when renovating, re-designing or building a new office space for wheelchair users. The evaluation of office environmental factors for wheelchair users who work in public and/or private companies is needed for the next research.

• Quality Improvement in Health Care
• /
• v.26 no.2
• /
• pp.77-85
• /
• 2020

Purpose: The purpose of this study was to determine the effect of simulation evacuation training improvement activity through wheelchair skill training. Methods: The study included 40 patients with early stroke who were randomly allocated to a wheelchair skill training group (Experimental group, n=20) and a general exercise group (Control group, n=20). Both groups performed the exercise 3 times a week for 3 weeks. Outcomes were assessed using Wheelchair Skills Test Skills Performance (WSTSP), Wheelchair Skills Test Skills Safety (WSTSS) and Wheelchair Propulsion Velocity (WPV). Results: After 3 weeks of training, both groups showed significantly improved WSTSP, WSTSS and WPV (p<.01 in both groups). However, the WSTSP, WSTSS and WPV in the experimental group were very significantly better than in the control group (p<.01). Conclusion: These findings indicate that wheelchair skill training may be effective at improving wheelchair skill ability and wheelchair propulsion velocity in stroke patients who cannot walk independently. Therefore, short-term wheelchair skill training could be useful for patient safety in simulated evacuation situations.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.77-85
• /
• 2000

The purpose of this study is to analyze problems of KS measurement of the wheelchair and a pair of crutches and to propose proper measurements of the wheelchair and a pair of crutches for the posteriori handicapped. Research method is as following ; First, it is compared that Anthropometry of Korean and Japanese adults relevance with design measurement of the wheelchair and a pair of crutches. Second, we compared measurements of KS wheelchairs with measurements of the wheelchair manufactured by the T aids company and the D aids company, and then compared and analyzed differences of measurements about each part of the wheelchair. Third, we compared measurements of a pair of crutches of an fixed and an elastic type with anthropometry and analysis. The result, measurements of KS wheelchair and KS a pair of crutches shows unsuitable to Korean adults. It may cause handicapped. We proposed measurements of the aids(the wheelchair and a pair of crutches) proper to the handicapped of Korean adults with improvement of these problems.

• Physical Therapy Korea
• /
• v.11 no.4
• /
• pp.7-17
• /
• 2004

Individuals who propel wheelchairs have a high prevalence of upper extremity injuries (i.e., carpal tunnel syndrome, elbow/shoulder tendonitis, impingement syndrome). Musculoskeletal injuries can result from overuse or incorrect use of manual wheelchairs, and can hinder rehabilitation efforts. To better understand the mechanisms of upper extremity injuries, this study investigates the motion of the wrist during wheelchair propulsion. This study also examines changes in the variables that occur with fatiguing wheelchair propulsion to determine how the time parameters of wheelchair propulsion and the state of fatigue influence the risk of injury. A two dimensional (2-D) analysis of wrist movement during the wheelchair stroke was performed. Twenty subjects propelled a wheelchair handrim on a motor-driven treadmill at two different velocities (50, 70 m/min). The results of this study were as follows; The difference in time parameters of wheelchair propulsion (cadence, cycle time, push time, recovery time, and PSP ratio) at two different velocities was statistically significant. The wrist kinematic characteristics had statistically significant differences at two different velocities, but wrist radial deviation and elbow flexion/extension had no statistically significant differences. There were statistically significant differences in relation to fatigue in the time parameter of wheelchair propulsion (70 m/min) between initial 1 minute and final 1 minute. The wrist kinematic characteristics between the initial 1 minute and final 1 minute in relation to fatigue had statistically significant differences but the wrist flexion-extension (50 m/min) had no statistically significant differences. According to the results, the risk of musculoskeletal injuries is increased by fatigue from wheelchair propulsion. To prevent musculoskeletal injuries, wheelchair users should train in a muscle endurance program and consider wearing a splinting/grove. Moreover, wheelchair users need education on propulsion posture, suitable joint position, and proper recovery patterns of propulsion.

• Physical Therapy Korea
• /
• v.9 no.2
• /
• pp.19-32
• /
• 2002

The purpose of this paper is to provide the reader with a pertinent information and research trends of biomechanics in wheelchair propulsion. Biomechanical studies for wheelchair propulsion mainly focus on the most suitable propulsion performance and methods for preventing upper extremity injuries. Recent issues have concentrated on wheelchair propulsion style and cycle mainly because of the high prevalence of repetitive strain injuries in the upper extremely such as shoulder impingement and carpel tunnel syndrome. Optimizing wheelchair propulsion performances as well as medical reflections are presented throughout the review. Information on the underlying musculoskeletal mechanisms of wheelchair propulsion has been introduced through a combination of data collection under experimental conditions and a more fundamental mathematical modelling approach. Through a synchronized analysis of the movement pattern and muscular activity pattern, insight has been gained in the wheelchair propulsion dynamics of people with a different level of disability (various level of physical activity and functional potential). Through mathematical modelling simulation, and optimization (minimizing injury and maximizing performance), underlying musculoskeletal mechanisms during Wheelchair propulsion is investigated.

• Journal of Integrative Natural Science
• /
• v.15 no.2
• /
• pp.83-87
• /
• 2022

In this study, through a survey on traffic safety campaigns for electric wheelchairs for the disabled, we found out what is necessary to solve the inconvenience of disabled people driving electric wheelchairs and living in society. The conclusions for each role of the severely disabled are as follows. The government has enacted a law on fostering convenience facilities for the disabled in accordance with reality so that the disabled, who are vulnerable to transportation, do not have any inconvenience in their social lives. However, it is not kept in reality, so there are many obstacles to the social activities of the disabled. In addition, local governments should subscribe to electric wheelchair insurance for the disabled to minimize the damage to the disabled in the event of an electric wheelchair accident. Organizations related to the disabled provide safety wheelchair driving education to prevent electric wheelchair accidents in advance and receive complaints about inconvenience. It can be concluded that people with severe disabilities can prevent accidents in advance by installing a moving ring tone on an electric wheelchair so that they can know the movement of the surrounding wheelchair.