• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.74-84
• /
• 2023

This paper is the result of a comparative analysis of crew members' workloads using the EMG and OWAS methods according to the fishing process before and after the improvement of the operating system of the experimental vessel, with the aim of improving operational efficiency and safety work of coastal improved stow net fishing vessels. The target crew members were three people with at least five years of experience on board the same fishing vessel as the experimental vessel. After improving the operating system, such as installing a power block crane and two capstans, change the location of the ball-roller, the time required for setting and hauling work decreased (p < .01), and the evaluation results by OWAS showed that the overall workload for setting and hauling net work decreased. The results of muscle activity analysis showed a decrease in lashing anchor work (p < .01) in the case of hauling net and in anchor dropping work in the case of setting net (p < .001). It is judged that the use of ball rollers in net handling has been reduced; consequently, work safety has been improved.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.3-26
• /
• 1985

The object of this study was to investigate the effects on physical and mechanical properties of wood particle and sawdust board combined with wire net. Conventional forming, press-lam, and veneer comply boards combining one to four wire net sheets were made from wood particle and sawdust with different spacings (8, 10, 12, and 18 Mok) and different wire diameters (0.35, 0.50, and 0.80mm) composing wire net. They were compared and analyzed statistically with specific gravity, thickness swelling, length swelling, bending properties (modulus of rupture, modulus of elasticity, work to proportional limit, and total work), internal bonding strength, and screw holding strength between wood particle and sawdust boards. The results obtained at this study as cording to the discussions might be concluded as follows; 1. In specific gravity, both particle and sawdust boards by press-lam method were higher than by conventional forming and veneer comply method, and the boards containing more wire net sheets also showed higher value. But the wire net spacings(Mok) had no influence on specific gravity. In general, particle board showed higher specific gravity than sawdust board. Veneer comply board showed lowest specific gravity values. 2. Both particle and sawdust boards by press-lam method was slightly lower than by conventional forming and veneer comply method in thickness swelling. The sawdust board containing 8, 12. and 18 Mok wire net showed lower thickness swelling than the corresponding particle board, but both sawdust and particle boards containing the T8 and 10 Mok wire net showed higher and similar thickness swelling. 3. Both particle and sawdust boards containing wire net showed no difference in MOR and MOE of bending. Comply board was the highest and particle board showed slightly higher than sawdust board in MOR and MOE values. 4. In work to proportional limit and total work in bending, both particle and sawdust boards containing thicker wire diameter and more wire net sheets showed higher value. From these facts, it is conceivable that boards with thicker wire diameter and more wire net sheets show increasing resistance against external force. But there was no significant difference between particle and sawdust borads. 5. In resistance against delamination (internal bonding strength), both sawdust and particle boards containing wire net showed lower value than control, and also showed decreasing tendency with more number of wire net sheet composed. Particle board showed higher resistance against delamination than sawdust board. 6. In screw holding strength, sawdust board containing thicker wire diameter and more wire net sheets showed higher value, but particle board by press-lam method was higher than by conventional forming and veneer comply method. Screw holding strength of particle board was higher than that of sawdust board.

• The monthly packaging world
• /
• s.177
• /
• pp.146-148
• /
• 2008

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.3
• /
• pp.301-310
• /
• 2013

To suggest a standard concerning with the arrangement of bridge equipment, the authors conducted the video observations with 3CCD (charge coupled device) cameras installed on the ceil of the bridge for monitoring the working activities of two bridge teams (the skipper/mate1 and the skipper/mate2) in a Korean coastal large trawler(gross tonnage: 139) for five days from July 30th. 2010 and analyzed of the data. Work elements coded by the work activities were input on the sheet of work analysis by the time unit of 1 sec according to the time occurred. A single work element among the work activities for every 5 minutes was denoted as the number of occurrence. The frequency of equipment usage was limited only in the usage of the equipment. In the case of the navigation and the towing net two ranks were integrated and analyzed. On the other hand, in the case of the casting net and the hauling net, two processes were integrated to as one and then analyzed separately as two ranks. As the results, 15 elements of work was carried out between two bridge teams for the observation; lookout, radar, GPS plotter, fish finder, net monitor, fishing deck, RPM indicator, rudder angle indicator, compass card, for maneuver; steering, ship speed control, trawl winch operation and external communications, paper works and others. It was found that the work load of the skipper per 5 minutes accordance with the navigation, the casting net, the towing net and the hauling net are 20.5 times, 11.9 times, 38.0 times and 9.5 times respectively, the mates are 65.2 times, 66.5 times, 85.7 times and 59.1 times respectively. The radar was shown the highest frequency of the equipment usage and the next was the fish finder, the GPS plotter and the external communications in the case of the navigation. In the case of the towing net the frequency of usage was high the ranking as the radar, the net monitor, the fish finder, the GPS plotter, the steering system and the external communications. In the case of the integrated process both of the casting and hauling net the trawl winch was shown the highest frequency to the skipper and the next was the GPS plotter and the radar, and the steering system was shown the highest frequency to the mate and the next was the radar, the ship speed control system, the GPS plotter, the net monitor and the fish finder.

• Journal of Pharmaceutical Investigation
• /
• v.23 no.2
• /
• pp.97-102
• /
• 1993

Hospital pharmacy services are divided into dispensing affairs for inpatients and outpatients, pharmaceutical service, stock control, intravenous admixture service, drug information service, pharmacokinetic consultation service, education and research work, etc. But among those affairs, dispensing affair for outpatient is perceived as the most important work in Korea, because it is linked directly with hospital service for patients. Therefore, total computer system for dispensing area was adopted from opening point of hospital in 1989 in Asan Medical Center. Utilization of computer system for outpatient dispensing area is as follows; 1) Order communication system of prescription by Total Hospital Information System, 2) Automatic print-out system of direction for use by sticker connected with on-line net work, 3) Use of automatic tablet counting and packaging machines connected with on-line net work. Those computer system resulted in curtailment of pharmacy manpower and shortening of waiting-time for outpatient.

• Journal of the Korean Society for information Management
• /
• v.20 no.2
• /
• pp.93-112
• /
• 2003

A public information system is being expanded, along with the advance of information technology, to strengthen national competitiveness and provide people with better services. And there also is a growin need for the better performance of that system, as a tremendous amount of public financial resources is invested in that. To address that need, it's required to make an evaluation of its efficiency on a regular basis to identify its problems and make it work better. The purpose of this study was, accordinglu, to examine the quality of data and services provided by the Work-Net, a Web-based public employment information system. The subjects in this study were 102 users of it, and the system was evaluated in terms of content, accuracy, timeliness, display format, ease of use and customer support. For data analysis, t-test and one-way ANOVA were implemented to find out the general characteristics of the users, and to see Whether or not their view was different according to the type of information they searched for. The findings of this study are expected to lay some foundation for intensifying the efficiency of the public and private employment information systems.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.579-586
• /
• 2011

During a reactor normal operation, a primary coolant was designed to remove the fission reaction heat of the reactor. When one pump is failure and the other pump shall supply the cooling water to cool the reduced power, it is necessary to estimate how much flow will be supplied to cool the reactor. We carried a flow net work analysis for two parallel pumping system as based on the piping net work of the primary cooling system in HANARO. As result, it is estimated that the flow of one pump increased than the rated flow of the pump below the cavitation critical flow.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.1-6
• /
• 2012

This study focuses on the benefit-cost analysis of certification of more than eight hundred devices and equipments used primarily in farm work. Specifically, EPA-suggested averting behavior approach was used for the analysis. Cost-benefit analysis indicates that there will be a net cost of 30 billion won for the first year since the introduction of the certification system. It is expected, however, that net benefit of 568 billion won after 11 years and the accumulated net benefit will reach to 3,867 billion won. These results validate the introduction of safety certification systems for devices and equipments used in farm work sites.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.2
• /
• pp.162-172
• /
• 2021

This study was conducted to determine whether the layout of wheelhouse and work environment of coastal improved stow net fishing boats affect the physical abnormalities of wheelhouse workers through a survey and to use it as basic data to improve the wheelhouse work environment. The analysis results are as follows. The result of factor analysis on the wheelhouse work environment was classified into three factors: suitability of work environment, suitability of work space arrangement, and layout of navigational and fishing equipment. The result of factor analysis on physical abnormalities was divided into two factors: physical pain and fatigue. The results of regression model analysis showing factors affecting physical pain showed that the t-value in the regression model was 3.625 (p < 0.05), indicating that the work environment suitability had an effect on the physical pain. Work environment suitability had a significantly positive effect on the physical pain. As work environment suitability increased by 1, the physical pain increased by 0.371 (p < 0.05). The results of regression model analysis showing the influencing factors on fatigue were found to have a t-value of 3.009 (p < 0.05) in the regression model, indicating that the work environment suitability had a significantly positive effect on the feeling of fatigue. It was found that fatigue increased by 0.324 (p < 0.05) as the work environment suitability increased by 1. In addition, the manageability of task suitability was found to be t = -2.521 (p > 0.05). As the manageability of task suitability increased, the skipper's fatigue level decreased. From these results, it is inferred that the wheelhouse of the current coastal improved stow net fishing boats causes physical pain and fatigue for the skippers. In order to reduce such physical pain and fatigue, and to improve safe fishing operation and job satisfaction, it is necessary to provide a wheelhouse to fishermen on coastal improved stow net fishing boats in consideration of the characteristics of the wheelhouse work of fishing boats and in consideration of users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.126-146
• /
• 2024

Caladium bicolor is one of the most popular plants in Thailand. The original species of Caladium bicolor was found a hundred years ago. Until now, there are more than 500 species through multiplication. The classification of Caladium bicolor can be done by using its color and shape. This study aims to develop a model to classify Caladium bicolor using a transfer learning technique. This work also presents a proof of concept, GUI design, and web application deployment using the user-design-center method. We also evaluated the performance of the following pre-trained models in this work, and the results are as follow: 87.29% for AlexNet, 90.68% for GoogleNet, 93.59% for XceptionNet, 93.22% for MobileNetV2, 89.83% for RestNet18, 88.98% for RestNet50, 97.46% for RestNet101, and 94.92% for InceptionResNetV2. This work was implemented using MATLAB R2023a.