• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.82-82
• /
• 2001

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.421-434
• /
• 2000

The purpose of this study was to evaluate the influences of incorporation of zirconium-silicate on diametral tensile strength, shear bond strength to the enamel, and depth of cure of 7 experimental composites. One group contained no filler(group 1 or control group), and the other 6 composites contain 75% filler in which zirconium-silicate(Zr-Si) were 0%, 2%, 4%, 6%, 8%, 10% with reduced contents of silica filler, respectively. Both of fillers were treated with 1% silane (${\gamma}$-methacryloxypropyltrimethoxy silane). Light curable monomers were prepared by mixing Bis-GMA and TEGDMA with 3:1 ratio and adding camphoroquinone(CQ) 0.6% with tertiary amine 0.3%. Diametral tensile strengths of specimens with $3mm{\times}6mm$ were measured with Instron (No.4467, USA) with 1mm/min crosshead speed. Shear bond strengths of composites which bonded to bovine enamel etched with 37% phosphoric acid were measured at Instron Testing Machine with as same speed as in diametral tensile strengths. Depth of cure were measured by a method that composite was filled in cylinder mold, illuminated at one side. and uncured composite was removed with acetone, and the residual thickness of composite was measured. Following results were obtained ; 1. Composites containing 0%, 2%, or 4% zirconium-silicate filler(group 2, 3 and 4) showed the statistically higher diametral tensile strength than the others. (p<0.05) 2. Increase of zirconium-silicate filler contents reduced the diametral tensile strength of experimental composites. ($r^2$=0.8721, p=0.0002) 3. Increase of zirconium-silicate filler contents did not affect the shear bond strength of experimental composites. ($r^2$=0.2815, p=0.4067) 4. Increase of zirconium-silicate filler contents reduced significantly the depth of cure of experimental composites. ($r^2$=0.9700, p<0.0001) These results mean that the mechanical properties of composites could not be improved by incorporation of small amount of zirconium-silicate filler. Also, the increased contents of zirconium-silicates fillers was found to reduce the diametral tensile strength and depth of cure.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.203-207
• /
• 2009

The concern of seriousness and harmful effects of environmental pollution is rising by the various water pollutions, appearances of new micro-noxious substances and increase of sustainable pollutants. The method is suggested that can effectively increase the removal of organic substances and several pollutants using a coagulation process. The experiment for characteristics of $ZrSiO_4$ (zirconium silicate) as a coagulation-aid was carried out for application to coagulation process with domestic wastewater and lake water, and the removal rate of the organic substances depending on a dosage was evaluated by PDA (Photometric Dispersion Analyzer) in this study. Zeta-potential of zirconium silicate solution was -32.22 mv at pH 7 and the lower negative(-) charge was detected in the more acidic conditions. Absorbance on $UV_{254}$ presented higher when zirconium silicate was added than in a domestic wastewater itself. Besides, the results by PDA experiment represented that injection of zirconium silicate could promote growing of floc. Tests for coagulation process were conducted by three ways which are pre-injection, co-injection and post-injection of zirconium silicate with alum. Accordingly, removal efficiency of organic substances increased over 15% in co-injection than in using of alum as a sole reagent. When a 20 mg/L of alum was used with a 10 mg/L of zirconium silicate, the removal efficiency was high up to 90%. Removal efficiency of $COD_{Cr}$ was improved more than 15% in case of dosage of coagulant either PAC (Poly aluminium chloride) or PACS (Poly aluminium chloride Silicate) together with zirconium silicate. As a result, the removal efficiency of $COD_{Cr}$ were 5~10% higher in a co-injection of zirconium silicate with a coagulant than a pre-injection and a post-injection but it of soluble substances was lower in a co-injection.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.166-172
• /
• 2000

Friction characteristics of phenolic resin-based friction composites containing threedifferent relative amounts of graphite and zirconium silicate were investigated by using a pad-on-disk type friction tester. Constant temperature test and constant interval test at three different initial temperatures(100. 200, 300$^{\circ}C$) were performed to examine the effects of friction heat on friction characteristics at elevated temperature. The friction composite(FMO.7) with higher content of ZrSiO$_4$showed unstable friction force at higher temperature and resulted in larger fluctuations of vibration during friction test. The abrasive action of ZrSiO$_4$in friction composite impeded stable transfer film and induced higher friction heat at friction interface. Friction oscillations according to the temperature were associated with the formation of transfer film(i'd body layer) on the friction composite and the counter part.

• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.365-372
• /
• 2000

Tribological behavior of novolac resin-based friction materials with three different relative amounts of graphite and zirconium silicate was investigated by using a pad-on-disk type friction tester. The goal of this paper is to examine the effects of the relative amount of a lubricant and an abrasive in the automotive friction material on friction and wear characteristics at elevated temperature. Friction and wear of friction materials were affected by the existence of transfer film(3$\^$rd/ body layer) at friction interface and the composition of friction material, especially lubricant amount. The friction material with higher content of graphite indicated homogenized and durable transfer film, and resulted in stable friction coefficient regardless of the increase in friction heat. The experimental result also showed that the higher concentration of ZrSiO$_4$ in friction material aggravated friction stability and wear resistance due to the higher friction heat generated at fiction interface during high temperature friction test.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.23-26
• /
• 1986

The synthetic conditions of $ ZrSiO_4-Cd(S_xS_{1-x})$ stains from CdS, Se, $SiO_2$ , 4ZrO_2$ and Lif were investigated and the colors were examined. Colors of the stains prepared were yellow orange red pink ruby and violet in relation to both the content of CdS-Se in $ZrSiO_4$ and firing temperature. Colors of these series stains were thermally stabilized probably by the structural stability of zirconium silicate. Furthermore by the result of X-ray diffraction analysis it is assumed that color of the zircon cadmium sulphoselenide $ ZrSiO_4-Cd(S_xS_{1-x})$ stain is developed by neither the coloring ions in $ZrSiO_4$ lattice nor the solid solution of $ZrSiO_4$ and $Cd(S_xS_{1-x})$ but by the small crystals of $Cd(S_xS_{1-x})$ being occluded by the zirconium silicate during sintering process.

• Electrical & Electronic Materials
• /
• v.16 no.9
• /
• pp.62.2-62
• /
• 2003

Material Characteristics of zirconium oxide thin films obtained by plasma enhanced chemical vapor deposition on p-type Si(100) substrates were investigated to explain their unable electrical properties. The films obtained without heating had polycrystalline nanograins that are mostly of a tetragonal phase under oxygen-deficient plasma conditions but transformed into a monoclinic phase with increasing $O_2$ addition in the plasma. Mostly amorphous bulk $ZrO_2$ with a relatively thicker and smoother interfacial layer was obtained from oxygen-rich plasmas, resulting in a decrease in both the overall dielectric constant and the leakage current density. the interfacial layer formed between the bulk $ZrO_2$ and Si substrate was analyzed to be zirconium silicate, which approached $SiO_2$ as its zirconium content decreased with the increasing gas phase $O_2$ content.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.198-198
• /
• 2002

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.191-198
• /
• 2022

Background: The purpose of this study was to evaluate the composition of the crystal phases of various calcium silicate-based materials (CSMs): ProRoot white MTA^Ⓡ (mineral trioxide aggregate) (WMTA), Ortho MTA^Ⓡ (OM), Endocem MTA^Ⓡ (EM), Retro MTA^Ⓡ (RM), Endocem Zr^Ⓡ (EN-Z), Biodentine^TM (BD), EZ-seal^TM (EZ), and OrthoMTA III (OM3). Methods: In a sample holder, 5 g of the powder sample was placed and the top surface of the material was packed flat using a sterilized glass slide. The prepared slides were mounted on an X-ray diffraction (XRD) instrument (D8 Advance; Bruker AXS GmbH, Germany). The X-ray beam 2θ angle range was set at 10~90° and scanned at 1.2° per minute. The Cu X-ray source set to operate at 40 kV and 40 mA in the continuous mode. The peaks in the diffraction pattern of each sample were analyzed using the software Diffrac (version 2.1). Then, the peaks were compared and matched with those of standard materials in the corresponding Powder Diffraction File (PDF-2, JCPDS International Center for Diffraction Data). A powder samples of the materials were analyzed using XRD and the peaks in diffraction pattern were compared to the Powder Diffraction File data. Results: Eight CSMs showed a similar diffraction pattern because their main component was calcium silicate. Eight CSMs showed similar diffraction peaks because calcium silicate was their main component. Two components were observed to have been added as radiopacifiers: bismuth oxide was detected in WMTA, OM, and EM while zirconium oxide was detected in RM, EN-Z, BD, EZ, and OM3. Unusual patterns were detected for the new material, OM3, which had strong peaks at low angles. Conclusion: It was caused by the presence of Brushite, which is believed to have resulted in crystal growth in a particular direction for a specific purpose.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.313-317
• /
• 2010

Li, Zr doped mesoporous silica was synthesized in one pot and investigated for low temperature $CO_2$ adsorption. Herein CTAB and TEOS are used as structural directing agent and silica source respectively. The characteristics of the material was obtained from FT IR, XRD, SEM, TG and BET results. ICP AES results revealed the presence of lithium and zirconium. The material possesses high surface area ($962.22m^2g^{-1}$) with mono dispersed particles of about 2 nm. The maximum $CO_2$ adsorption capacity is 5 wt % (50 mg/g) of $CO_2$/g of sorbent at $25^{\circ}C$, which is regenerable at $200^{\circ}C$. This regeneration temperature of the adsorbent is lower than the reported lithium zirconium silicate powder. Until now, there is no report for the synthesis of Li, Zr doped mesoporous silica. The performance studies illustrate that Li, Zr doped mesoporous silica is tunable, regenerable, recyclable and selective sorbent and hence found to be a promising candidate for $CO_2$ adsorption.