• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.328-334
• /
• 2002

Nylon 6 staple ultramicrofiber(UMF, 0.074) and regular staple fiber (Regular, 2.0d) were annealed at In, 130, 160 and $180^\circ{C}$ under tension free for 10 min and U min. The treated fibers were dyed with Acid Red 18 and Blue n3. They were adjusted at PH 5.0 of dye bath in buffer solution of $CH_3COOH/CH_3/COONa(0.1mo1/1)$. Liquor ratio was kept at 1000:1. Dyeing rate of UMF annealed at $100^\circ{C}$ was decreased, but was increased for regular nylon. Also dye equilibrium of UMF at $100^\circ{C}$ was increased for Acid Red 18, but was decreased for Acid Blue 83. The intensities of X-ray diffraction peaks of UMF increased with increasing annealing temperature. Also the crystallinity of heat-sotted fibers by DSC thermogram was well agreed with the tendency of density Amino end group, moisture regain and water absorbency were decreased with increasing annealing temperature.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 추계학술대회 논문집
• /
• pp.1311-1318
• /
• 2003

최근 흡한 속건성은 사이언스 소재로 가장 보편적으로 이용되고 있는 소재 성능이다. 하지만 아직 제대로 된 측정 평가법이 존재하고 있지 않고, 몇몇 의류업체에서는 단순히 객관적 속성만을 측정하고 있다. 본 연구에서는 객관적 속성인지들의 연속적이 값들이 실제 인체에서는 얼마만큼의 변별력으로 인식되는지 정신물리학적 측정법으로 최소 자극치(PSE)를 구하여 등급을 나누어 보았다. 시료는 흡한속건성 직물로 가장 많이 이용되고 있는 Coolmax(R), Coolever(R), 친수성 이중직물의 3개 그룹으로 나누었고, 측정 인자로 객관적 속성인자는 cling force, drying time을, 이와 대응하는 주관적 속성인자는 clinginess, dampness를 측정하고 각각의 PSE값을 구하였다. 그룹에 따라 객관적 속성인자 값들이 이라고 느끼는 PSE 구간까지 도달하는 시간과 속력을 측정하여 그룹마다의 흡한속건 등급을 정하였다. 또한 설계된 소재의 성능을 간접적으로 알 수 있는 transmissibility라는 인자도 도입하여 수분 전달성도 객관적으로 살펴볼 수 있었다. Clinginess, Dampness, Transmissibility 각 인자들을 평가해본 결과 Coolmax(R) 가 가장 우수함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.63-67
• /
• 1991

Amorphous silicon films were deposited on glass, [100] single crystal silicon wafer with thermally grown silicon dioxide, and [100] silicon wafer substrates by Plasma Enhanced Chemical Vapor Deposition(with argon diluted silane source gas). Growth rate, UV optical band edge, and the hydrogen quantity in the amorphous silicon films have been investigated as a function of the preparation conditions by measuring film thickness, UV-absorbency, and FT-IR transmittance. The growth rate of the ${\alpha}$-Si:H films increases with increasing substrate temperture, flow rate and R.F. power density. The UV optical band edge shifts to blue with the increases in the deposition pressure. Increasing substrate temperature shifts the UV optical band edge of the films to red. Hydrogen quantity in the ${\alpha}$-Si:H films increases with an increases in the R.F. powr and decreases with an increase in the substrate temperature.

• 한국자기학회지
• /
• 제4권3호
• /
• pp.208-213
• /
• 1994

복합 Ferrite 전파흡수체의 성능은 두께가 얇으며 대역폭이 넓을수록 우수하다. 본 연구에서는 복합 Ferrite 전파흡수체의 정합두께를 감소시키기 위하여 Ferrite-Iron-Rubber 복합체를 제조하고 그 특성을 고찰하였다. ${\alpha}-Fe$ 분말의 첨가에 의하여 복합체의 유전율 실수항과 투자율 실수항이 증가하여 정합주파수와 정합두께의 고하기 항인 $f_{m}.d_{m}$ 항이 감소하였고, 3~17 GHz의 주 파수 범위에서 Ferrite-Rubber 복합체에 비하여 정합두께가 0.5 mm~2 mm 정도 감소함을 확인할 수 있었다.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.95-104
• /
• 2004

A series of superabsorbents based on acrylic acid (AA), sodium acrylate, 2-acrylamido-2-methylpropane sulphonic acid, N,N'-methylene bis-acrylamide (MBA) were prepared by inverse suspension polymerization. These hydrogels were further crosslinked on the surface with polyethylene glycol-600 (PEG-600). The water absorbency or swelling behaviors for these xerogels in water and 0.9% saline solutions, both under free condition and under load were investigated. Absorption characteristics of these hydrogels were found to depend on nature and concentration of crosslinker in the system. It was also found that the saline absorption was significantly improved as the incorporation of AMPS in the polymer was increased. The surface crosslinking introduced in the polymers was found to improve the absorption under load characteristics without lowering the free water absorption capacities of the polymer to a considerable extent.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.61-70
• /
• 2001

As important factors determining human sensorial comfort, liquid moisture management and surface properties of heat resistant workwear materials were examined. To figure out liquid moisture management properties of the test materials, absorption capacity, rate of absorption, and evaporation properties were assessed. A modified GATS(Gravimetric Absorbency Testing System) was used to measure the liquid moisture accumulation associated with the wicking of liquid moisture from sweating skin. The GATS procedure measures demand wettability of materials to take up liquid in a direction perpendicular to the fabric surface and it was modified to incorporate a special test cell and cover to assess absorption behavior in the presence of evaporation. Fabric stiffness, smoothness, number and the length of surface fibers, and an estimate of the contact area between the skin and fabric surface were measured to characterize the mechanical and surface properties of the test materials. Also an estimate of the force with which a fabric clings to moist skin was made using as wet-cling index.

• 한국가정과교육학회지
• /
• 제7권1호
• /
• pp.1-10
• /
• 1995

This study was intended to provide an improved method for testing textiles in high school. Four kinds of test subjects were selected and applied to the classes. Problems of the methods in the textbooks were corrected as follows: 1)Burning test: The number of specimen is reduced to 3 kinds of fibers(cotton, wool, and polyester) and recommends are given to make result by comparing with the burning characteris-tics of paper and hair. 2) Absorbency test: Test Method is changed to drop test. The result is recorded by measuring time required for the water drops absorbed to the specimen. 3) Wrinkle recovery test: A glass is provided instead of metal weight. The method of measuring angle which is made by the specimen is shown in figure. 4) Effects of Detergent: 0.2% of detergent solution is provided before class. The amount of oil and carbon black is specified. Students have generally agreed that the improved methods were better than those in the text-books after they made the above 4 recommendable experiments(p<.001)

• 대한가정학회지
• /
• 제37권12호
• /
• pp.169-177
• /
• 1999

This study has examined weight loss rates of Iyoceu, lyocell/cotton, cotton that were treated with cellulase under different concentration, time, temperature and pH. and compared physical properties changes of tensile strength, drape, moisture absorbency, shrinkage and dyeability. The notable results are summarized as follows: Lyocell was in need of pretreatment by NaOH in the side of weight loss, tensile strength and dyeability. Weight loss rates of cellulose fabrics by cellulase treatment were in the order of cotton > lyocell/cotton > lyocell at the same conditions. In case of lyocell and lyocell/cotton, weight loss rates showed up lower than cotton, while strength retention decreased, drape and strength flexibility were highly improved after cellulase treatment.

• 펄프종이기술
• /
• 제33권4호
• /
• pp.35-41
• /
• 2001

A newly developed functional fiber for textile, Tencel, which is known to have some advantages over wood fiber such as fibrillation, absorbency and so on, was examined to see the possibility of a raw material for hanji. Hanji was manufactured by the conventional handmade method using Tencel of three different fiber lengths with three different levels of mixing ratio of Tencel and paper mullberry fiber, and their physical and calligraphic properties were evaluated and compared with one another. It was needed to develop more efficient beating methods than conventional one such as valley beating for Tencel to be used effectively as a raw material for hanji. It was found out by image analysis that the calligraphic properties of hanji could be improved by mixing of 10 to 20% of Tencel of relatively short-length fiber with paper mulberry.

• 대한가정학회지
• /
• 제19권2호
• /
• pp.143-149
• /
• 1981

Consumer consider the purpose for which they plan to use clothes when they purchase it, and the socks in textile products is evaluated in the same way. serviceability is judged by the extent to which the socks will be useful for its intended purpose. It should retain its original shape and size, good air permeability, good absorbency, good abrasion resistance, high fastness etc. Owing to importance of serviceability in socks, in this paper, these end-use requirement characteristics were tested. The results obtained were as follows: 1. Blend ratios were different between the indicated fiber contents on labels and the testing ones. 2. Air permeability was higher in the samples which contain less stitch density, and hydroscopicity was higher in those which contain natural fibers such as cotton and wool. 3. Shrinkage depended on the blend ratios of cotton and wool, and elastic recovery was better in the course direction than in the wale direction. 4. Pilling was conspicuous in the synthetic fibers such as polyester and nylon, and fastness of laundering and perspiration was higher in the fading grade than in the staining grade.