• Proceedings of the Korean Fiber Society Conference
• /
• 1994.04a
• /
• pp.29-29
• /
• 1994

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.28-30
• /
• 2008

Poly(ethylene oxide)(PEO) of molecular weight of 300,000 was crosslinked by exposure to UV irradiation. Photochemical crosslinking of PEO occurred by UV irradiation and the presence of benzophenone in the film which acts as a hydrogen-abstracting agent. Percent conversion of the polymer into gel as well as water absorbency were investigated gravimetrically. Gel fraction and water absorbency of PEO films increased with increasing UV energy. In case of photocrosslinked PEO films with benzophenone, gel fraction increased up to about 90%. The thermal behavior of crosslinked PEO films was studied by thermogravimetric analysis. The maximum decomposition temperature increased with increasing UV energy and benzophenone concentration.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2005

Study on the use of enzymes for textile wet processing has been very active. The exploratory research conducted herein is related to the bioscouring process for cotton fabric. The optimum concentration of alkaline pectinase(BioPrep) was in the range of 0.05～0.2 g/l, the proper treatment time was 30～60 minutes, the appropriate treatment temperature was $60^{\circ}C$ for both the batch method and the padding method. The simultaneous desizing/bioscouring by padding method did not give water absorbency as good as the bioscouring after desizing. Color of fabrics which were bioscoured and dyed with direct dyes and a reactive dye was just a little darker than that of NaOH scoured one. K/S and Lab values of the bioscoured fabrics, regardless of the degree of water absorbency, were quite similar to each other.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.393-398
• /
• 2004

This research offers recycling method of NaOH from mercerizing process of cotton fabric. The measuring system of NaOH concentration was designed for the mercerizing process and tested for various conditions which can be occurred in factory. The accuracy of the system was varied as the testing condition was changed. As the concentration of sulfuric acid used for titrating NaOH decreased, the accuracy of measuring system increased. The concentration of NaOH for waste water collected from mercerizing process was measured by 5.2%. As the ratio of newly mixed NaOH increased, moisture regain. water absorbency and whiteness of the specimen increased. The bending rigidity(B) and shear rigidity(G) decreased, as the ratio of newly mixed NaOH increased.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.250-255
• /
• 1998

The purpose of this study was to determine physical characteristics, and subjective sensation toward sports socks, varing types of fiber content and fabric structure. Also we tried to develop regression models from variables. Results of this study are as follows. 1. Cotton 100% socks had a highest absorbency and wickability among six different socks. The result of ANOVA shows that fiber content influenced on the wet sensation only prior to exercise. 2. Terry socks had a higher drop absorbency, stretch properties and thermal resistances than plain jersey socks. But there was no significant difference in overall comfort sensation. 3. We developed regression models to predict overall comfort sensation from thermal sensation and wet sensation. Also we can predict thermal sensation from the thickness of socks in the sole area, and we can predict wet sensation from moisture permeability

• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.10-16
• /
• 1997

Merino wool top and fabric have been treated with steams such as superheated steam or high pressure steam. Moisture regain, water absorbency, water penetration, zeta potential, ESCA, SEM, and dyeing behavior were studied. Negative electric potential on the surface of wool fibers by steam treatment became higher than untreated. From the results of ESCA measurement, intensity of $O_{1s}$ was increased by steam treatment. Rate of dyeing and saturation dye exhaustion of wools increased by steam treatment, especially high pressure steam treatment. Moisture regain, water absorbency, water penetration, and surface appearances by SEM photographs of the steam-treated wools didn't change. There is no relationship between dyeing of the steam-treated wool and wettability to water. Therefore It seems likely that relaxation of adhesive filler in interscale of wool by steam treatment accelerate dye penetration into the fiber.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.81-88
• /
• 1998

The aim of this study is to evaluate several plant extracts with a view to developing UV sunscreen agents. In this study, 150 plant extracts were screened to elucidate their UV spectra using spectrophotometric method. Several plant extracts such as Phellodendron amurense, Morus alba, Rhododendron mucronulatum, Brassica alba have strong absorbency at UVA region (350nm), the suntanning wavelength. And Sophora flavescens, Caesalpinia sapper, Morus alba, Phellodendron amurense, showed absorption plateau value at UVB region (308nm), the erythema action wavelength. These extracts have a good absorbency property as synthetic filter and could be served as substitutes for synthetic UV sunscreen agents.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.537-543
• /
• 2008

Crosslinked agar-g-poly(acrylic acid) (x-agar-g-PAA) super absorbent with a water absorbency ($Q_{H2O}$) of approximately 660 g/g was synthesized by the copolymerization of agar with an acrylic acid monomer. KPS and MBA were used as the initiator and crosslinker, respectively. Grafting was performed in air. Infrared spectroscopy was used to identify the product of copolymerization. The optimum conditions to synthesize the x-agar-g-PAA superabsorbent were 0.1 g of agar, 0.1 g of the KPS initiator, for 15 min; 50% AA monomer, 0.005 g of the MBA crosslinker, for a propagation time of 5 min; and 1 M NaOH for 15 min to allow for saponification. The reaction temperature was $80{^\circ}C$.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.249-256
• /
• 2020

Superabsorbent polymers (SAPs) can absorb and retain ten to thousand times their dry mass of water because of their three-dimensional hydrophilic structures. Conventional SAPs are mainly composed of poly(acrylic acid sodium salt) derived from petrochemicals. The present work is aimed at limiting the use of the petrochemical component by replacing it with a biomass-based material. First, the core-SAP was prepared via the terpolymerization of itaconic acid, vinylsulfonic acid, and cellulose, and the optimum conditions in terms of material input ratio were determined. Following this, the core-SAP was surface-crosslinked by esterification with butane diol to improve its liquid permeability and absorbency under load (AUL). The liquid permeability was measured according to the amount of 0.9 wt.% NaCl solution passing between the swollen SAP particles under a given pressure, and the AUL was estimated from the weight of this solution absorbed under 0.3 psi pressure.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.57-62
• /
• 1993