• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.947-952
• /
• 2001

The prediction model is proposed to estimate the variation of compressive strength of fly ash concrete with aging. After analyzing the experimental result with the model, the regression results are presented according to fly ash replacement content and water/cement ratio. Based on the regression results, the influence of fly ash replacement content and water/cement ratio on apparent activation energy was investigated. According to the analysis, the model provides a good estimate of compressive strength development of fly ash concrete with aging. As the fly ash replacement content increases, the limiting relative compressive strength and initial apparent activation energy become greater. The concrete with water/cement ratio smaller than 0.40 shows that the limiting relative compressive strength and apparent activation energy are nearly constant according to water/cement ratio. But, the concrete with water/cement ratio greater than 0.40 has the increasing limiting relative compressive strength and apparent activation energy with increasing water/cement ratio.

• 대한통합의학회지
• /
• 제4권4호
• /
• pp.67-75
• /
• 2016

Purpose: The purpose of this study was to compare Hip-Knee-Ankle(HKA) angle and muscle activation ratio between vastus medialis(VM), rectus femoris(RF), and vastus lateralis (VL), and by this, to examine their relationship. It is aimed to explore how the activation ratio among the muscles involved in patellofemoral kinetics would vary in relation with the frontal alignment of the lower extremity. Subjects and Methods: 26 healthy subjects were recruited for the study. The HKA angles were measured with radiograph. The VM, RF, VL muscle activation level were measured by surface electromyography while each participant performed 4 different types of movement (isometric knee extension, squat, ambulation, step-up) and VM/RF, VM/VL, RF/VL ratios were calculated. Pearson correlation was used to estimate the relationship between the HKA angle and the muscle ratio. Results: There was significant moderate correlation between HKA angle and VM: RF on the left side during ambulation (p<0.05). Moderate correlations were also observed during step-up and squat with less significance (p<0.1). Conclusion: The frontal alignment of the knee measured by the HKA angle was conditionally associated with muscle activation ratio between VM and RF (VM:RF); On the left, during ambulation, step-up, and squat, the more valgus knee tended to correlate with the more VM muscle activation ratio, which is expected to induce more stabilizing effect to the patella and its tracking. It suggests that the frontal alignement measured by the HKA-angle can affect PF kinetics. It also indicates a possibility that increase in valgus alignment of the knee, by the HKA measurement, may not act unfavorably to generate PFP.

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1091-1098
• /
• 2007

Activated carbon was prepared from waste citrus peels by chemical activation with $ZnCl_2$. The optimal condition of carbonization was at $300^{\circ}C$ for 1.5 hr. Activation experiments with carbonized samples prepared at optimal carboniztion condition were carried out under various conditions such as activation temperature of 400 to $900^{\circ}C$, activation time of 0.5 to 2.0 hr, and $ZnCl_2$ ratio of 100 to 300%. In order to investigate the physical properties of the activated carbons prepared, iodine adsorptivities and specific surface areas were measured and their morphologies were observed from scanning electron microscopy. As $ZnCl_2$ ratio increased, activation yield decreased, while iodine adsorptivity and specific surface area increased. The optimal condition of activation was at 300% $ZnCl_2$ ratio and $300^{\circ}C$ for 1.5 hr, and then iodine adsorptivity and specific surface area was measured as about 862 mg/g and $756m^2/g$, respectively. SEM photography showed that the surface morphology was changed and many active pore were produced by chemical activation.

• Physical Therapy Rehabilitation Science
• /
• 제10권3호
• /
• pp.304-310
• /
• 2021

Objective: This study aimed to investigate effective cueing methods for selective muscle activation of gluteus medius muscles. Design: Cross sectional study design. Methods: Using the inclusion criteria for this study, 20 healthy adults, both males and females were selected for the measurement of muscle activation of gluteus maximus, gluteus medius, and tensor fascia latae muscles while performing clamshell exercise, basic movements in leg raise in side-lying, and 3 different cueing methods. Electromyogram was used to measure muscle activation, and both muscle activation and muscle ratio were compared during the basic movements and different cueing methods. Results: Gluteus medius activation was highest using "try not to make your body rotate" (cueing method 2) in both clamshell exercise and leg raise side-lying (F=5.533, p<0.05, F=7.771, p<0.05), and muscle ratio was highest in clamshell exercise using cueing method 2 (p<0.05) and "don't move your tensor fascia late" (cueing method 1) in leg raise side-lying (p<0.05). This study showed that cueing method 1 in leg raise side-lying and cueing method 2 in clamshell exercise were the most effective cueing methods for selective muscle activation of gluteus medius muscle. Conclusions: The results of this study may be used as basic information for future studies on muscle activation and muscle ratio for different cueing methods and different muscles in various exercises.

• 국제물리치료학회지
• /
• 제11권2호
• /
• pp.2071-2076
• /
• 2020

Background: Based on the understanding of the muscle activation relationship between the infraspinatus and posterior deltoid muscles to according to the angle of motion during external rotation on glenohumeral joint, effective shoulder joint strengthening exercise for the prevention and rehabilitation of shoulder injury due to muscle strength imbalance can be performed by achieving the ideal muscle activity ratio during exercise. Objectives: To compare and analyze the muscle activation changes and activity ratio of the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle. Design: Quasi-randomized trial. Methods: The study included 48 healthy male and female adults who provided informed consent for participation in the study. All the subjects performed isometric glenohumeral external rotation by setting the angle of motion to 30°, 45°, and 60° using a 5 kg resistance weight pulley. On surface electromyography, the differences in muscle activation and activity ratio between the infraspinatus and posterior deltoid muscles were investigated. Results: A significant difference in muscle activation was found in the comparison between the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle (P<.05). The muscle activation levels of the infraspinatus and posterior deltoid muscles were highest at the external rotation angles of 30° and 60°, respectively. The muscle activity ratio between the infraspinatus and posterior deltoid muscles also showed a significant difference (P<.05) and was highest at the shoulder external rotation angle of 30°. Conclusion: The findings of this study suggest that muscle activity is the highest at the shoulder external rotation angle of 30° in healthy individuals.

• 콘크리트학회논문집
• /
• 제13권3호
• /
• pp.237-243
• /
• 2001

본 논문에서는 플라이애시 콘크리트의 재령에 따른 변화를 예측하기 위한 모델식을 제시하고 그 모델식의 유효성을 검토하였다. 기존에 행해졌던 실험결과를 모델식을 이용하여 회귀분석한 후에 그 결과를 플라이애시 대체량과 물-시멘트비에 따라 분석하였다. 해석결과에 의하면 예측 모델식은 실험결과를 일정오차내에서 잘 모델링하였다. 그러나 물-시멘트비가 매우 작은 경우에는 플라이애시 대체량이 증가하면 실험값과 예측값의 오차가 조금 증가하는 경향을 나타내었다. 플라이애시 대체량이 증가할수록 한계상대압축강도의 크기가 증가하였고 초기 겉보기 활성에너지도 한계상대압축강도와 같이 플라이애시 대체량이 증가할수록 증가하였다. 0.40이하의 물-시멘트비에서는 한계상대압축강도와 겉보기 활성에너지의 크기가 일정하고 물-시멘트비가 0.40을 초과하면 물-시멘트비의 증가에 따라 한계상대압축강도와 겉보기 활성에너지가 조금씩 증가하였다.

• PNF and Movement
• /
• 제16권1호
• /
• pp.125-132
• /
• 2018

Purpose: The aim of this study was to investigate the isolated activation ratio of the quadriceps femoris muscle on different support surfaces during squat exercise. Methods: Twenty participants (10 males and 10 females) voluntarily agreed to participate in the research after receiving an explanation about the purpose and process of the study. Each participant performed squat exercises on three different support surfaces (a flat surface, a form roller, and an unstable surface). Muscle activities of the rectus femoris (RF), vastus medialis (VM), and vastus lateralis (VL) were measured by electromyography. The isolated activation ratio of the quadriceps femoris muscle was calculated using the %isolation formula. Results: For the squat exercise, the %isolation value of the VM was significantly higher on the unstable surface than on the flat surface and form roller. In contrast, the %isolation values for the RF for the squat exercise were significantly higher on the flat surface and form roller than on the unstable surface. There was no significant differences in the %isolation values of the VL on the three different surfaces. Conclusion: The findings indicate that squat exercise on different surfaces results in differential activation of the quadriceps femoris muscle, which suggests that squat exercise on a multi-directional unstable surface could increase the isolated activation ratio of the VM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.1015-1016
• /
• 2010

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.81-86
• /
• 2014

The process parameter in optimized KOH alkali activation of soft carbon series coke material in high purity was set with DOE experiments design. The activated carbon was produced by performing the activation process based on the set process parameters. The specific surface area was measured and pore size was analyzed by $N_2$ absorption method for the produced activated carbon. The surface functional group was analyzed by Boehm method and metal impurities were analyzed by XRF method. The specific surface area was increased over 2,000 $m^2/g$ as the mixing ratio of activation agent increased. The micro pores in $5{\sim}15{\AA}$ and surface functional group under 0.4 meq/g were obtained. The contents of the metal impurity in activated carbon which is the factor for reducing the electrochemical characteristics was reduced less than 100 ppm through the cleansing process optimization. The electrochemical characteristics of activated carbon in 38.5 F/g and 26.6 F/cc were checked through the impedance measuring with cyclic voltammetry scan rate in 50~300 mV/s and frequency in 10 mHz ~100 kHz. The activated carbon was made in the optimized activation process conditions of activation time in 40 minutes, mixing ratio of activation agent in 4.5 : 1.0 and heat treatment temperature over $650^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.103-110
• /
• 2014

Sisal fiber, an agricultural resource abundantly available in china, has been used as raw material to prepare activated carbon with high surface area and huge pore volume by chemical activation with zinc chloride. The orthogonal test was designed to investigate the influence of zinc chloride concentration, impregnation ratio, activation temperature and activation time on preparation of activated carbon. Scanning electron micrograph, Thermo-gravimetric, $N_2$-adsorption isotherm, mathematical models such as t-plot, H-K equation, D-R equation and BJH methods were used to characterize the properties of the prepared carbons and the activation mechanism was discussed. The results showed that $ZnCl_2$ changed the pyrolysis process of sisal fiber. Characteristics of activated carbon are: BET surface area was $1628m^2/g$, total pore volume was $1.316m^3/g$ and ratio of mesopore volume to total pore volume up to 94.3%. These results suggest that sisal fiber is an attractive source to prepare mesoporous high-capacity activated carbon by chemical activation with zinc chloride.