• Journal of Information Display
• /
• 제2권2호
• /
• pp.39-44
• /
• 2001

The conditions of the wall charges and priming particles in a unit discharge cell in AC PDP seriously affect the addressing discharge characteristics in the driving method with ramped setup pulse. Moreover, the discharge conditions at the end of the scan line may be different from the first scan line because of the difference of about 1ms address time. Consequently, the addressing time and its dispersion may be different for any two discharge cells that lead to misfiring and the increase in the total addressing time. In order to improve the addressing time and its dispersion, we have applied different addressing voltage at each cell such as progressively increase pulse voltage instead of constant one. As a result, the addressing time and its dispersion of all cells were improved by about 30% compared with the conventional driving method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.67-71
• /
• 2003

One of the most important problems in ADS method is that the method has too long addressing period, The addressing time can be defined as the sum of the discharge time lag and the duration of discharge current. If the addressing time increases, the sustaining period for display image should be decreased. As a result, the luminance of the PDP decreases. Therefore, the discharge time lag and duration of discharge current should be decreased in order to reduce the addressing time. In this paper, in order to improve addressing time, relationships between addressing time and cell structure in AC PDP was studied

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1065-1069
• /
• 2002

The addressing time should be reduced by modifying cell structure and/or driving method in order to replace the dual scan system by single scan and increase the luminance in large ac plasma display panel(PDP). In this paper, the effects of the addressing time was decreased with decreasing thickness of dielectric layer on the front glass and thickness of white dielectric layer on the rear glass. the decreasing rate were 160ns/10$\mu\textrm{m}$ and 270ns/10$\mu\textrm{m}$, respectively Also in case of decreasing the height of barrier rib, addressing time was decreased at the rate of Sons/10$\mu\textrm{m}$.

• Journal of Information Display
• /
• 제2권1호
• /
• pp.10-13
• /
• 2001

The addressing time can be reduced by modifying cell structure and/or driving circuits in order to replace the dual scan system by single scan in large ac plasma display panel(PDP). Moreover, the luminance of the PDP can also be increased by decreasing the addressing time. In this paper, various shapes of bus and address electrodes have been investigated with the aim of reducing the addressing time in ADS driving method. The experimental results show that the addressing time can be reduced by more than 30% compared with the conventional type by modifying the electrodes without reducing the luminance of the PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.511-514
• /
• 2004

ADS(Address Display period Separation) driving method has been considered to be the most appropriate driving technique for AC PDPs. However when the ADS driving method is applied to the high-resolution AC PDP, the required long addressing time often becomes a problem. In this paper, we present a new waveform for reducing the addressing time and for the stable addressing discharge. In this new waveform, a wall charge acceleration pulse is applied to the common electrode right after 80us scan time. In this way, the charge generated by the addressing discharge is accelerated to the electrodes. Experiments using the wall charge acceleration pulse showed that we could stably address an AC PDP with the scan pulses having pulse width of 1 us

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1827-1829
• /
• 2000

To replace the dual scan system by single scan in large ac plasma display(PDP), the addressing time should be reduced by modifying cell structure and driving circuits. Moreover. the luminance of the PDP can be also increased with the decrease in the addressing time. In this paper, various shapes of bus and address electrode have been investigated to reduce the addressing time in ADS driving method. The experimental results show that the addressing time can be reduced more than 30% compared to the conventional type by modifying the electrodes without reducing the luminance of the PDP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1824-1826
• /
• 2000

Up to date, the dual scanning method has been adopted to decrease address-ing period in AC PDP. In this case, addressing period can be reduced, but the driving circuit cost should be increased. In this study, to increase addressing speed we have studied the relationship between addressing speed and cell structure. That is to say, we varied the thickness of dielectric layer on the front glass, the thickness of white back and the height of barrier rib on the rear glass. So, we found that the addressing time was decreased 4% with decreasing 5um thickness of dielectric layer on the front glass and 2um thickness of white back on the rear glass. Also in case of decreasing the height of barrier rib, addressing time was decreased about 4% per 10um.

• 산업공학
• /
• 제21권1호
• /
• pp.131-140
• /
• 2008

To shorten product development time and cost, integrated information managements of product, manufacturing process and resource are essential. In the area of material addressing, process engineers should make their decisions in the manner of collaborative engineering in order to reduce the manufacturing preparation time and cost in the product development and production. A digital virtual factory which is an united digital model of entire factory could be very useful for these areas. In this paper, the digital virtual factory is constructed and used for material addressing and analysis of an automotive general assembly shop. We developed the material addressing system for automotive general assembly shops using digital virtual factory models and nesting algorithms, and applied it to realistic problems of a Korean automotive company as an convenient and effective way of material addressing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.105-108
• /
• 2003

A new high speed addressing method is proposed to reduce the addressing time below lus per line in AC PDP. In this method, the priming discharge is used to achieve a high speed addressing without adding an auxiliary electrode. Two different types of priming discharges were studied to achieve a high speed addressing and also reduce the inherent light output caused by the priming discharge in order to improve the contrast ratio characteristics. In the panel experiment, the addressing was successfully done with a lus address pulse width in the new method and the better contrast ratio was achieved in the Y-A priming rather than the Y-X priming case even though the reduction of the address period was smaller than that of the Y-X priming due to the extra address time for the priming discharges.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.41-45
• /
• 2001

The addressing time should be reduced by modifying cell structure and/or driving method in order to replace the dual scan system by single scan and increase the luminance in large ac plasma display panel(PDP). In this paper, the effects of the dielectric layer thickness and the barrier rib height on the addressing time of ac PDP are investigated. It is found out that the addressing time was decreased with decreasing thickness of dielectric layer on the front glass and thickness of white dielectric layer on the rear glass. The decreasing rate were 160ns/10${\mu}{\textrm}{m}$ and 270nsd/10${\mu}{\textrm}{m}$, respectively. Also in case of decreasing the height of barrier rib, addressing time was decreased at the rate of 550ns/10${\mu}m$.