• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.402-408
• /
• 2013

PURPOSE. The aim of this study was to evaluate the surface properties and in vitro bioactivity to osteoblasts of magnesium and magnesium-hydroxyapatite coated titanium. MATERIALS AND METHODS. Themagnesium (Mg) and magnesium-hydroxyapatite (Mg-HA) coatings on titanium (Ti) substrates were prepared by radio frequency (RF) and direct current (DC) magnetron sputtering.The samples were divided into non-coated smooth Ti (Ti-S group), Mg coatinggroup (Ti-Mg group), and Mg-HA coating group (Ti-MgHA group).The surface properties were evaluated using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The surface roughness was evaluated by atomic force microscopy (AFM). Cell adhesion, cell proliferation and alkaline phosphatase (ALP) activity were evaluated using MC3T3-E1 cells. Reverse transcription polymerase chain reaction (RT-PCR) analysis was performed. RESULTS. Cross-sectional SEM images showed that Mg and Mg-HA depositionson titanium substrates were performed successfully. The surface roughness appeared to be similaramong the three groups. Ti-MgHA and Ti-Mg group had improved cellular responses with regard to the proliferation, alkaline phosphatase (ALP) activity, and bone-associated markers, such as bone sialoprotein (BSP) and osteocalcin (OCN) mRNA compared to those of Ti-S group. However, the differences between Ti-Mg group and Ti-MgHA group were not significant, in spite of the tendency of higher proliferation, ALP activity and BSP expression in Ti-MgHA group. CONCLUSION. Mg and Mg-HAcoatings could stimulate the differentiation into osteoblastic MC3T3-E1 cells, potentially contributing to rapid osseointegration.

• 대한치과보철학회지
• /
• 제58권4호
• /
• pp.300-305
• /
• 2020

목적: 인공치의 표면처리가 3D 프린팅 의치상레진과의 전단결합강도에 미치는 영향을 알아보고 임상적용에 있어 참고하기 위함이다. 재료 및 방법: 3D 프린팅 의치상레진을 3D 프린터를 이용하여 시편을 제작하였고, 인공치의 표면처리는 sandblasting, 프라이머의 적용 유무에 따라 5가지 군으로 나누어, 각 군마다 10개씩 진행하였다. Universal testing machine을 이용하여 전단 결합 강도를 측정하였고, 측정값은 one-way ANOVA로 통계분석 후 Turkey test를 통해 사후검정하였다. 이후 파절된 시편을 주사전자현미경을 이용하여 관찰하였다. 결과: 평균전단결합강도는 표면 처리 하지 않은 군에서 가장 낮은 값을 나타내었으며, 프라이머 처리한 군에서 유의하게 높은 결과 값을 나타내었다(P < .05). 또한 프라이머 처리한 군에서 대부분 응집파절을 나타내었다. 결론: 3D 프린팅 의치상레진에 인공치를 결합 시 인공치의 기계적·화학적 표면처리는 전단결합강도를 증가시켜 3D 프린팅 방식을 사용하여 의치를 제작할 경우 기계적·화학적 표면처리를 통해 인공치의 탈락을 줄일 수 있으며, 특히 sandblasting 과 프라이머를 처리하는 방법이 추천된다.

• Journal of Radiation Protection and Research
• /
• 제20권1호
• /
• pp.8-15
• /
• 1995

환경방사능 분석기술은 원자력시설의 가동중 정상 및 비정상 상태시 이상판단과 지역특성에 따른 주변환경 방사능의 특성 및 거동파악 등을 하는데 필요한 기술로 원전 가동전, 후 환경방사능량을 비교함으로서 방사능 오염 및 변화상황을 파악할 수 있다. 국내에는 현재 관련법에 따라 규제기관 및 관련기관에 의해 환경감시가 계속되어오고 있으나 분석기술에 대한 한국규격이 없으므로 분석절차가 서로 상이하고 분석결과의 상대오차율이 커서 환경방사선 감시결과에 대한 신뢰성이 떨어지고 있다. 따라서 토양시료에 대한 감마핵종 분석에 한정하여 기수행된 측정방법 및 결과 둥을 비교분석하므로서 원전주변 환경방사능 감시목적에 적합한 분석기술의 신뢰도 향상 및 상대오차율 최소화 방안을 도출하였다

• 대한골관절종양학회지
• /
• 제18권2호
• /
• pp.113-117
• /
• 2012

73세 남자환자가 내원 8개월 전 좌측 원위 대퇴부의 연부 조직 종괴로 타 병원에서 절제술을 시행받은 뒤, 재발하여 4개월 뒤 재수술을 받았으나, 수술 부위의 치유되지 않는 창상을 주소로 내원하였다. 타 병원에서 시행한 조직 검사 소견은 단순 낭종이었다. 수술 소견상 종괴는 외측 광근의 근막층을 침범하면서 경계가 불규칙하며 주변으로 유착되어 있어, 종괴로부터 5 cm 경계를 확보하여 단순 절제술을 시행하였다. 본원 조직검사 결과, 악성 섬유성 조직구종으로 진단되어 추가적인 방사선 치료를 시행하였다. 수술 후 1년째까지, 크기가 증가되거나 타 부위에 전이되는 소견은 관찰되지 않았다. 단순 낭종으로 생각하고 절제술을 시행하였으나, 악성 섬유성 조직구종으로 확진되었던 경우로, 종양 절제술은 수술 전 세밀한 검사 및 진단이 필요할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.774-780
• /
• 1999

The study of bond behavior between concrete and rebar has been performed for a long time. On this study, we tried to analysed variation of bond behaviors quantitatively with varying the strength of concrete. Bond stress which observed below the neutral surface of beam and at connecting part of beam and column is affected by various bond parameters. Resistance of deformed bars which embedded in concrete to the pullout force is divided 1) chemical adhesive force 2) frictional force 3) mechanical resistance of ribs to the concrete and these horizontal components of resistance is being bond strength. We selected the most common and typical variable which is concrete strength among various variables. So we used two kinds of concrete strength like as 25MPa(NSC) and 65MPa(HSC). Tension Test was performed to verify how bond behavior varied with two kinds of concrete strength. Concentration of bond stress was observed at load-end commonly in Tension Test of the initial load stage. At this stage stress distribution was almost coincident at each strength. As tension load added, this stress distribution had difference gradually and movement of pick point of bond stress to free-end and central section was observed. This tendency was observed at first and moving speed was more fast in NSC. At the preceeding result the reason of this phenomenon is considered to discretion of chemical adhesion and local failure of concrete around rebar in load-end direction. Especially, when concrete strength was increased 2.6 times in tension test, ultimate bond strength was increased 1.45 times. In most recent used building codes, bond strength is proportioned to sqare root of concrete compressive strength but comparison of normalized ultimate bond strength was considered that the higher concrete strength is, the lower safety factor of bond strength is in each strength if we use existing building codes. In Tension Test, in case of initial tensile force state, steel tensile stress of central cross section is not different greatly at each strength but tensile force increasing, that of central cross section in NSC was increased remarkably. Namely, tensile force which was shared in concrete in HSC was far greater than that of concrete in NSC at central section.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.280-293
• /
• 2004

Statement of problem. Glass fiber post is one of recent developments to accommodate esthetic restoration for endodontically treated teeth. This has many advantages over conventional post system in physical properties, esthetic factor, risk of root and restoration fracture, adhesion to core, radiopacity, removal and retrievabilty, biocompatibility and chemical stability. Purpose. This in vitro study was to evaluate the most suitable type of resin core for the glass fiber post through surveying the fracture modes and the maximum load that fractures the tooth. Material and methods. 50 sound maxillary premolars restored with glass fiber posts($ParaPost^{(R)}$ Fiber White) and different types of resin cores(ParaCore, $Z100^{TM}$, $Rebilda^{(R)}$ and $Admira^{(R)}$) were prepared and loaded to faiure in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with resin and those of metal cast and core. With the data, Wilcoxon rank sum test was used to validate the significance between the test groups, and Tukey' s studentized range test was used to check if there is any significant statistical difference between each test group. Every analysis was approved with 95% reliance. Results. On measuring the maximum fracture load of teeth specimens, there was a significant difference between the maximum fracture loads of the tooth specimens. ParaCore showed the highest mean maximum fracture load followed by $Z100^{TM}$. And, the distribution of fracture mode of tooth specimens showed generally Type D, the three parted fracture of the core around the post was mostly seen(62.5%), and specifically, ParaCore showed 90% and $Z100^{TM}$ showed 100% Type D fracture. Conclusion. Referring to the values of maximum fracture load and mean compressive fracture load, ParaCore and $Z100^{TM}$ had high values and are recommended as tooth colored resin core material for glass fiber post. CLINICAL IMPLICATIONS. This study was carried out intending to be of aid in selecting the appropriate resin core for the glass fiber post. The dual cure type composite resin ParaCore and light cure type composite resin $Z100^{TM}$ have good properties and are recommended as tooth colored resin core material for glass fiber post.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.698-713
• /
• 1999

Adherence of Candida albicans(C. albicans) to the surface of a denture is believed to be an initial and essential step in the formation of denture-induced stematitis. Previous studies have provided enormous infomation on the relationship between composition of palatine gland/parotid saliva and upper denture stomatitis. Relatively little information is available on the correlation between lower denture stomatitis and sublingual-submandibular ( SLSM ) saliva. The plaque samples were collected from the two sites($100mm^2$) on the inner surface of lower partial denture corresponding to the stematitis and healthy region of the lower partial dentures of 12 denture stomatitis patients and 6 nor-mal persons who wore lower partial dentures. The samples were plated to isolate C. albicans on a selective Saboraud's dextrose agar plate and the isolates were identified by germ tube test and gram staining. The subjects were divided into group I (stomatitis with C. albican), group II (lesion without C. albicans), group III (no lesion but C. albicans), and group IV (normal and healthy denture wearer). Individual SLSM saliva($20{\mu}g$ of protein) was analyzed by SDS-PAGE (SDS -poly-acrylamide gel electrophoresis) with Coomassie brilliant blue and PAS(Periodic Acid Schinff) stain-ing. The salivary proteins separated in the polyacryamide gels were subjected to immunoblot anaysis using anti-lactoferrin, anti-sIgA, and anti-secretory component of sIgA. In this study using custom made acrylic denture resin beads(5mm in diameter) coated with stimulated individual SLSM saliva, the binding ability of individual C. albicans strains to the beads was observed. Levels of C, albicans adhered to the acrylic resin beads were determined by measuring the optical density of the bound C. albicans to the beads at 580nm. The results showed that a higher number of C. albicans was observed in the lesion site than healthy site. The saliva of group I contained more high molecular weight glycoprotein(mucin, MGI) as compared to group II, III and IV. And lactoferrin and sIgA affected to the binding ability of C. albicans to acylic resin beads. Binding ability of individual C. albicans to the acrylic resin coated with respective individual saliva was found to be greater in group I than the other 3 groups. And when bound cells of C. albicans isolated from individual subject #2 to the saliva coated beads were used binding ability of subject #2 saliva coated beads was founed to be greater than the other sutjects. These results suggested that denture induced stomatitis is related to individual patient's salivary protein composition, especially MG-1. Future studies will be directed toward saliva exam-ination of patients who have general disease and analysis of pellicles formed on prosthesis with respect to oral disease.

• 한국식품영양과학회지
• /
• 제45권1호
• /
• pp.12-19
• /
• 2016

본 연구에서는 김치에서 분리한 우점유산균인 Lactobacillus plantarum KCCM 11352P(LPpnu)와 Leuconostoc mesenteroides KCCM 11353P(LMpnu)의 프로바이오틱 효과를 프로바이오틱 효과가 높기로 잘 알려진 Lactobacillus rhamnosus GG(LRgg)의 효능과 비교하여 확인하였다. 그 결과 LPpnu는 Lab. rhamnosus GG(LRgg)보다 프로바이오틱 효과가 더 뛰어났으며, LMpnu 또한 LRgg와 거의 유사한 수준의 효능을 나타냈다. LPpnu와 LMpnu는 모두 내산, 내담즙성, 장 부착능, 열 안정성의 프로바이오틱의 기본 특성을 가지고 있었으며, 특히 LPpnu는 가장 높은 프로바이오틱 효과를 나타냈다. 또한 LMpnu 및 LRgg와 비교했을 때 LPpnu는 DPPH radical과 hydroxyl radical 소거능 측정에서 더 높은 항산화능을 보였고, Bcl-2 유전자 발현억제와 Bax 유전자 발현 증가를 통해 apoptosis를 유도함으로써 HT-29 human colon cancer cell에서 높은 암세포 성장 저해 효과를 나타냈다. 이를 통해 김치유래 LPpnu와 LMpnu는 프로바이오틱으로서 이용 가능성이 충분하다고 판단되며, 특히 LPpnu는 항산화 및 항암 활성에 뛰어난 효능을 나타내었기에 중요한 프로바이오틱 균주라고 하겠다.

• Journal of Acupuncture Research
• /
• 제19권6호
• /
• pp.111-124
• /
• 2002

A line of study reported that electroacupuncture(EA) modulate natural killer cell(NK Cell) activities. One report suggested that EA enhanced splenic interferon-gamma($IFN-{\gamma}$), interleukin-2(IL-2), and NK cell activity in Sprague-Dawley rats. Another study suggested that $IFN-{\gamma}$ mediates the up-regulation of NK cell activity, and endogenous ${\beta}$-endorphin secretion also play a role in the up-regulation of NK cell activity induced by EA stimulation. In order to better understand the molecular regulation underlying the activation of NK cell induced by EA, we have utilized cDNA microarray to elucidate how EA alters program of gene expression of spleen in rats. First, we divided three groups, group I was EA group treated with EA in restriction holder, group II was sham group with only holder stress, and last group III was control group with no treatment. We measured NK cell activity after EA stimulation three times for 2 days using $^{51}Cr$ release assay. Second, Biotin-labeled cDNA probes synthesized from EA group and sham group, were competitively hybridized to the microarray that contained variable genes. Such high-throughput screening has identified a number of EA-responsive gene candidates. Of these, we found that EA induced a subset of genes of genes that functionally could modulatory effects on NK cell activity. Genes(vascular cell adhesion molecule-1, protein-tyrosine kinase, CD94 mRNA) related to boost NK cell activity, were increased by EA And, genes(protein-tyrosine-phospatase mRNA, protein-tyrosine phosphatase(SHP-1) mRNA) related to inhibit NK cell activity, were decreased by EA. These EA-responsive genes may provide key insights from which to understand mechanisms of activation of NK cell induced by EA.