• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.575-581
• /
• 2020

A colorless antistatic agent was prepared for use in antistatic films for liquid crystal displays (LCDs) requiring low surface resistance and high transmittance. Among various lithium-fluoro compounds and quaternary ammonium salts, antistatic materials were selected based on their electrical conductivity, and antistatic agents were prepared to measure the surface resistance. As a result, the material with high conductivity showed a relatively low surface resistance, i.e., relatively good antistatic performance. Based on the antistatic materials selected, the formulation ratio for producing the best antistatic agent was established through the experimental design method and the effects of each factor were analyzed. The higher the use of lithium- fluoro compounds as antistatic materials, the higher the ratio of oligomer use with multi-functional groups, and the smaller the surface resistance. The quaternary ammonium salts increased the antistatic performance of the lithium-fluoro compounds, but the effects of the amount used were not relatively large. After manufacturing the antistatic PET film, the properties of the antistatic film showed low surface resistance values (<10⁹ Ω/sq.), high permeability (>92%), low haze (<0.5%), and high whiteness (L^⁎>95). In addition, the antistatic film reliability was found to be excellent by showing a stable surface-resistance change rate of less than 10%, even under high temperature and high humidity conditions.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.353-362
• /
• 2022

Recently, transmittance of photomasks for ultra-violet (UV) region is getting more important, as the light source wavelength of an exposure process is shortened due to the demand for technologies about high integration and miniaturization of devices. Meanwhile, such problems can occur as damages or the reduction of yield of photomask as electrostatic damage (ESD) occurs in the weak parts due to the accumulation of static electricity and the electric charge on chromium metal layers which are light shielding layers, caused by the repeated contacts and the peeling off between the photomask and the substrate during the exposure process. Accordingly, there have been studies to improve transmittance and antistatic performance through various functional coatings on the photomask surface. In the present study, we manufactured antireflection films of Nb₂O₅, | SiO₂ structure and antistatic films of ITO designed on 100 × 100 × 3 mmt sodalime glass by DC magnetron sputtering system so that photomask can maintain high transmittance at I-line (365 nm). ITO thin film deposited using In/Sn (10 wt.%) on sodalime glass was optimized to be 10 nm-thick, 3.0 × 103 𝛺/☐ sheet resistance, and about 80% transmittance, which was relatively low transmittance because of the absorption properties of ITO thin film. High average transmittance of 91.45% was obtained from a double side antireflection and antistatic thin films structure of Nb₂O₅ 64 nm | SiO₂ 41 nm | sodalime glass | ITO 10 nm | Nb₂O₅ 64 nm | SiO₂ 41 nm.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.85-92
• /
• 2015

The 50 mole% HCl doped polyaniline(PAni) was synthesized by polymerization of aniline in the presence of hydrochloric acid and ammonium persulfate(APS) as dopant and oxidant, respectively. Then, conducting biodegradable cellulose acetate composite films were also prepared with PAni in acetone to find their applicability to antistatic packaging materials. The tensile strength of PCA05 film with 5 wt% of PAni was decreased by 27% from $377.1kg_f/cm^2$ for CA film itself to $275.2kg_f/cm^2$. Elongation was also decreased from 7.65% to 4.35%. Surface registance of $7.0{\times}10^9{\Omega}/sq$ could be achieved for the PCA containing 5 wt% of PAni. Therefore, this PCA05 film can be applied to antistatic package film for electronic board. In addition, decomposition temperature of these PCA films obtained by thermogravimetric analysis(TGA) was decreased with the amount of PAni in PCA films, and the final weight of char was directly proportional to PAni contents. From this thermal result we can calculate the content of PAni in unknown PCA films.

• The monthly packaging world
• /
• s.145
• /
• pp.92-97
• /
• 2005

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1039-1042
• /
• 2001

A method for designing antireflection (AR) and antistatic (AS) films by the use of conducting polymer as an electrically conductive transparent layer is proposed. The conducting AR film is composed of four-layer with alternating high and low refractive index layer: silicon dioxide (n=1.44) and titanium dioxide (n=2.02) prepared at low temperature by sol-gel method are used as the low and high refractive index layer, respectively. The 3,4-polyethylenedioxythiophene (PEDOT) which has the sheet resistance of 10$^4$$\Omega$/$\square$ is used as a conductive layer. Optical constant of ARAS film was measured by the spectroscopic ellipsometer and from the measured optical constants the spectral properties such as reflectance and transmittance were simulated in the visible region. The reflectance of ARAS films on glass substrate was below 0.8 %R and the transmittance was higher than 95 % in the visible wavelength (400-700 nm). The measured AR spectral properties was very similar to its simulated results.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.458-462
• /
• 2015

It is essential to employ a binder to prepare transparent films from conductive polymer such as poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT/PSS). In this paper, poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), and PSS were selected as a binder, and their effects were investigated. The formation of the film was found to be primarily dependent on the surface tension of coating solution including PEDOT/PSS and a binder. When PSS was used as a binder, the film was not formed. In case of using PVP, it was easily peeled off from the substrate. However, when using the PVA or the mixtures of PVA and PSS or PVA and PVP as a binder, films with good transparency and uniform surface resistances were produced. Based on adhesion and long-term stability tests, we concluded that the mixture of PVA and PSS is the best binder for preparing antistatic films of PEDOT/PSS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.61-66
• /
• 2002

A method for designing antireflection (AR) and antistatic (AS) coating layer by the use of conducting polymer as an electrically conductive transparent layer is proposed. The conducting AR coating is composed of four-layer with alternating high and low refractive index layer: silicon dioxide (n=1.44) and titanium dioxide (n=2.02) prepared at low temperature by sol-gel method are used as the low and high refractive index layer, respectively. The poly(3,4-ethylenedioxythiophene) which has the surface resistivity of 10$^4$Ω/$\square$ is used as a conductive layer. Optical constant of each ARAS coating layers such as refractive index and optical thickness were measured by 7he spectroscopic ellipsometer and from the measured optical constants the spectral properties such as reflectance and transmittance were simulated in the risible region. The reflectance of ARAS films on glass substrate was below 1 %R and the transmittance was higher than 95 % in the visible wavelength (400-700 nm). The measured AR spectral properties was very similar to its simulated results.

• Textile Coloration and Finishing
• /
• v.10 no.3
• /
• pp.43-49
• /
• 1998

Polyvinyl chloride (PVC) sheets were treated with corona discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PVC surfaces were subsequently used as initiators for the graft polymerization of acrylic acid or acrylamide in an aqueous solution. Introduction of acrylic acid and acrylamide on the PVC sheet could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. The water contact angle$(90^\circ)$ of PVC sheet was constant, irrespective of time, while corona-treated and functional monomer-grafted PVCs were slowly increased with time, showing the rearrangement of surface polar groups in air condition. The water contact angle of PVC sheet$(90^\circ)$ was decreased by corona treatment$(78^\circ)$, and further decreased by the grafting of acrylic acid$(55^\circ)$ and acrylamide$(56^\circ)$ , indicating increased hydrophilicity of the modified surfaces. The half-life periods of surface voltage on acrylic acid- (62 sec) and acrylamide-grafted PVC (147sec) were significantly decreased when compared to those on PVC (3,115 sec) and corona-treated PVC (463sec). These results mean that acrylic acid- and acrylamide-grafted PVCs could be used as the antistatic sheets.

• Journal of Adhesion and Interface
• /
• v.3 no.3
• /
• pp.22-29
• /
• 2002

UV curable coating system described here consists of double layers, namely under layer and top laser coatings. The former consists of organic-inorganic conductive materials and the latter consists of multifunctional acrylates. Transparent double layer coatings were prepared on the transparent substrates i.e. PMMA, PC, PET etc. by the wet and wet coating procedure. Their surface resistances and film properties were measured as a function of the top layer thickness and relative humidity. As the thickness of the top layer was less than $10{\mu}m$, the surface resistance in the range of $10^8{\sim}10^{10}{\Omega}/cm^2$ was obtained. The surface properties of the two-layer coating were remarkably improved compared with the single layer coating. The effects of migration of conducting materials on the film properties of multilayer coating were investigated by using contact angle and Fourier transform infrared/attenuated total reflection(FT-IR/ATR). It was found that the migration of dopant(dodecyl benzenesulfonic acid, DBSA) molecules were occurred from film-substrate interface to film-air interface in the organic conductive coating system but not in the inorganic one.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.66-71
• /
• 2008

A new route to phthalocyanine complexes were developed to synthesize these products by fusion in the absence of solvent. This new method of synthesis without using solvent has advantages over the conventional synthetic methods since there are no risk of explosion and formation of harmful vapor from organic solvent. Reaction of PcFe with axial ligands such as $PcFe(4-VP)_2$[Pc: Phthalocyanine, 4-VP: 4-Vinylpyridine] and $PcFe(VIM)_2$[VIM: 1-Vinylimidazole] afforded powderlike, pure dark greenish blue colored products. The resulted products are soluble in $CH_2Cl_2$ and found to be complexes of the type $PcFeL_2$. Spectral properties were studied with ATR-FTIR and UV/Vis. Thermal and electrical characterization was also performed. Phthalocyanine complexes exhibit useful properties such as UV/Vis blocking, antistatic characteristics and excellent thermal stability and we anticipate various applicability in numerous products.