• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.611-614
• /
• 2003

p-KG03의 고유점도는 65.22 및 50.75 $d{\ell}/g$ 이며, 사슬강도성은 0.170이였고, 특성화 농도는 0.114 g/l이었다. p-KG03은 non-Newtonic fluid로 Power-Low Model에 의한 pseudoplastic한 물성을 갖으며, 유체성으로 p-KG03 1%의 constancy index (K)는 2,172 cp, flow behavior index (n)는 0.52이었다. 특히 pH, 염 및 열에 안정하며 기존 다당류와의 혼합이용 가능성이 있을 것으로 생각된다.

• 접착 및 계면
• /
• 제18권3호
• /
• pp.109-117
• /
• 2017

본 연구에서는 poly(N-vinyl carbazole) (PVK), poly(4-vinylpyridine) (PVP), PVK-b-PVP 블록 공중합체를 RAFT 중합법으로 합성하였으며, 이를 이용하여 ethanol, N-methyl-2-pyrrolidone (NMP), dichloromethane (DCM), tetrahydrofuran (THF)와 같은 비 수계 용매에서 그래핀 분산액을 제조하였다. 합성된 고분자의 화학적 구조는 양성자 및 탄소 핵자기 공명 분광기($^1H-$, $^{13}C-NMR$), 크기 배제 크로마토그래피 (size exclusive chromatography, SEC), 시차 주사 열량계 (differential scanning calorimetry, DSC)를 이용하여 분석하였으며, 그래핀 분산액의 분산 안정성은 Turbiscan을 이용하여 시간에 따른 터비스캔 안정성 지수(Turbiscan stability index, TSI)를 측정, 정량적으로 평가하였다. 용매, 고분자, 그래핀의 표면장력(${\sigma}$), 용해도 상수(${\delta}$)를 이용하여 물질간의 상호작용에 대하여 설명하였으며, 이를 바탕으로 용매와 그래핀간의 용해도와 표면장력의 차이가 분산안정성에 큰 영향을 미침을 확인하였다. 그래핀의 분산 안정성이 좋지 못한 ethanol 및 THF 용매 하에서 PVK-b-PVP를 사용하여 그래핀을 분산시킬 경우 낮은 TSI값을 효과적으로 유지할 수 있었으며, 그래핀을 잘 분산시킨다고 알려진 NMP에 비하여 DCM이 더 좋은 그래핀 분산안정성을 보임을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.699-703
• /
• 2004

Solvolyses of isopropylsulfonyl chloride (IPSC) in water, D_2O,\;CH_3OD$, and in aqueous binary mixtures of acetone, ethanol and methanol are investigated at 25, 35 and 45$^{\circ}C$. The Grunwald-Winstein plot of first-order rate constants for the solvolytic reaction of IPSC with $Y_{Cl}$ (based on 2-adamantyl chloride) shows marked dispersions into three separate lines for three aqueous mixtures with a small slope (m < 0.30). The extended Grunwald-Winstein plots for the solvolysis of IPSC show better correlation. The kinetic solvent isotope effects determined in water and methanol are in consistent with the proposed mechanism of the general base catalyzed and/or $S_AN/S_N2$ reaction mechanism for IPSC solvolyses based on mass law and stoichiometric solvation effect studies.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.545-551
• /
• 2006

Aqueous dispersions of pristine and functionalized (COOH- and $NH_2$-) multi-walled, carbon nanotubes (MWNTs) were prepared by using three types of surf act ants: sodium dodecyl sulfate (SDS, anionic), PEO-PPO-PEO (Pluronic P84, non-ionic), and poly(styrene/$\alpha-methyl$ styrene/acrylic acid) random terpolymer, i.e., alkali-soluble resin (ASR). The aggregate size, $\zeta-potential$, and storage stability of the MWNT aqueous dispersions were investigated by using dynamic light scattering and the turbidity method at room temperature. The exfoliation of the MWNT aggregates was determined by a UV-visible spectrophotometer and the morphology of the surfactant-coated MWNTs was observed by transmission electron microscopy (TEM). In all cases, ASR showed better dispersion stability with the smallest aggregate size, compared with the other surfactants, because of its unique molecular structure, i.e., randomly incorporated carboxylic acid groups and planar phenyl groups that can be irreversibly and effectively adsorbed on the MWNT surface. A predominantly-exfoliated morphology of MWNTs was observed in the presence of ASR from the strong intensity of the UV-vis spectrum at 263 nm.

• KSBB Journal
• /
• 제24권6호
• /
• pp.533-540
• /
• 2009

본 연구에서는 난용성 약물인 5'-NIO의 가용화를 위해 초임계 유체 ASES 공정을 이용하여 PVP K-30과의 고체분산체를 제조하고 첨가제인 P188의 영향에 대해 고찰하였다. FE-SEM을 이용하여 초임계 유체 공정으로 제조된 고체분산체 미립자의 형상을 분석한 결과 100-200 nm 크기의 나노입자들이 응집된 형태를 나타내었으며, P188의 함량이 증가함에 따라 입자간의 응집이 증가하여 덩어리 형태로 전환되는 것을 확인할 수 있었다. XRD 분석 결과 5'-NIO 결정피크가 사라진 것을 확인하였으며, 이는 5'-NIO가 고분자 매질내에 분자 또는 나노 크기 수준으로 분산되었음을 의미한다. 또한 FT-IR 분석 결과 5'-NIO와 PVP K-30간에 수소결합과 같은 상호작용이 존재함을 학인할 수 있었다. 5'-NIO/PVP K-30 2성분계 고체분산체에 비이온성 계면활성제를 첨가한 경우 용출률이 현저히 향상되었으나, P188의 함량이 매우 큰 경우에는 오히려 용출률이 감소한 다는 것을 확인하였다. 본 연구를 통해 초임계 유체 공정이 기존의 고체분산체 제조 방법을 충분히 대체할 수 있다는 가능성을 확인할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제31권3호
• /
• pp.151-160
• /
• 2001

The purpose of this study is to investigate the interaction of progesterone with various cyclodextrins (CDs) in the aqueous solution and in solid state, and finally to formulate a parenteral aqueous formulation. CDs used were ${\alpha}-$, ${\beta}-$, and ${\gamma}-CD$, $2-hydroxypropyl-{\beta}-CD$ (HPCD), sulfobutyl $ether-{\beta}-CD$ (SBCD), $dimethyl-{\beta}-CD$ (DMCD) and $trimethyl-{\beta}-CD$ (TMCD). The solubility studies of progesterone were performed in the presence of various CDs as a function of concentration or temperature. The solubility of progesterone increased in the rank order of ${\alpha}-CD$ < ${\beta}-CD$ < ${\gamma}-CD$ < TMCD$ < HPCD < DMCD < SBCD. Addition of SBCD (200 mg/ml) in water increased the aqueous solubility $(9.36\;{\mu}g/ml)$ about 3,200 times, and lowering the temperature facilitated the solubilization of progesterone. However, the addition of HPCD and SBCD in 20:80 (v/v) polyethylene glycol 300-water and propylene glycol-water cosolvents markedly decreased the solubility of progesterone, compared with solubilizing effects in water. Physical mixtures and solid dispersions of progesterone with HPCD or SBCD were prepared, and evaluated by differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), near IR spectroscopy and dissolution studies. By DSC and IR studies, it was found that progesterone was dispersed in HPCD in monotectic state and dissolved rapidly from both solid dispersions. Based on solubility studies, new aqueous progesterone fonnulations (5 mg/ml) containing SBCD (200 mg/ml) could be prepared and did not form precipitates even after 2 months at $4^{\circ}C$. The solution was transparent when mixed with normal saline and 5% dextrose injection at 1: 1, 1:10 and 1:20 (v/v) even after 7 days. Permeation rates of progesterone through a cellulose membrane from 20% PEG 300 solution $(50\;{\mu}g/ml)$ containing HPCD or SBCD were compared with oily formulation. Permeation of progesterone from oily formulation did not occur up to 8 hr, but aqueous formulations showed fast permeation rates from early stage of permeation study. The addition of HPCD or SBCD retarded the permeation rates of progesterone with the increase of CD concentrations, suggesting the possibility of a controlled absorption from the site administered intramuscularly. These results demonstrate that it is feasible to develop a new progesterone parenteral aqueous injection (5 mg/ml) using SBCD.

• Macromolecular Research
• /
• 제15권1호
• /
• pp.22-30
• /
• 2007

High water vapor permeable coating materials were prepared by blending aqueous poly(vinyl alcohol) (PVA) solution with waterborne polyurethane-urea (WBPU) dispersions synthesized by prepolymer mixing process. Stable WBPU/PVA dispersions were achieved at PVA content below 30 wt%. As the water soluble polymer PVA content increased, the number and density of total micro-pores (tunnel-like/isolated micro-pores) formed after the dissolution of PVA in water increased, and the water vapor permeability of coated Nylon fabric also increased significantly. Using WBPU/water soluble polymer PVA blends as a coating material and then dissolving PVA in water was confirmed to be an effective method to obtain prominent breathable fabrics.

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.955-956
• /
• 2000

Solvolyses of methanesulfonyl chloride in water, $D^2O$, $CH^3OD$, and in aqueous binary mixtures of acetone, eth-anol and methanol are investigated at 25, 35 and $45^{\circ}C.$ The Grunwald-Winstein plot of first-order rate con-stants for the solvolytic react ion of methanesulfonyl chloride with YCl (based on 2-adamantyl chloride) shows marked dispersions into three separate lines for three aqueous mixtures with a small m value (m < 0.30), and shows a rate maximum for aqueous alcoholic solvents. Stoichiometric third-order rate constants, kww and kaa were calculated from the observed first-order rate constants and (kaw + kwa) was calculated from the kww and kaa values. The kinetic solvent isotope effects determined in water and methanol are consistent with the proposed mechanism of the general base catalyzed and/or SAN/SN2 reaction mechanism for methanesulfonyl chloride solvolyses based on mass law and stoichiometric solvation effect studies.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.1017-1021
• /
• 1997

Solvolyses of p-methoxyphenyl chloroformate in water, D2O, CH3OD, 50% D2O-CH3OD, and in aqueous binary mixtures of acetone, ethanol and methanol are investigated at 25.0 ℃. Product selectivities are reported at 25 ℃ for a wide range of ethanol-water and methanol-water solvent compositions. The Grunwald-Winstein plots of first-order rate constants for p-methoxyphenyl chloroformate with YCl (based on 1-adamantyl chloride) show marked dispersions into three separate curves for the three aqueous mixtures with a small m value and a rate maximum for aqueous alcohol solvents. Third-order rate constants, kww, kaw, kwa and kaa were calculated from the observed kww and kaa values together with kaw and kwa calculated from the intercept and slope of the plot of 1/S vs. [alcohol]/[water]. The calculated rate constants, kcalc and mol % of ester agree satisfactorily with those of the observed rate constants, kobs and mol % of ester, supporting the stoichiometric solvation effect analysis. The kinetic solvent isotope effects determined in water and methanol are consistent with the proposed mechanism of the general base catalyzed carbonyl addition-elimination.

• 접착 및 계면
• /
• 제3권3호
• /
• pp.7-14
• /
• 2002

Poly(ethylene-co-methylacrylate)(PEMA)를 KOH, 암모니아 수용액으로 가수분해, ammonolysis 시켜서 측기에 -COOK, $-CONH_2$, -COOH를 갖는 수분산 형태의 변성 폴리에틸렌(m-PE)을 제조하였다. Infrared spectroscopy, 원소 분석 및 atomic absorption 분석 등을 통하여 m-PE 측기의 종류 및 조성비를 조사하였으며 수분산액의 고형분 함량에 따른 점도 및 표면장력을 측정하였다. 제조된 수분산액은 측기의 조성에 따라 안정도, 투명도 등이 변화하였다. 측기 중에서 -COOK가 수분산에 가장 큰 영향을 주었으며 -COOK 조성비가 20 mol% 이상이 되어야 안정한 분산을 얻을 수 있었고 또한 -COOK 조성비가 높을수록 수분산액은 투명하였다. 동일 -COOK 조성비에서는 아마이드의 농도가 높을수록 탁도가 증가하여 친수성이 떨어짐을 알 수 있었다. 분산액의 고형분 함량에 따른 점도를 측정하면 -COOK 조성비가 클 경우 낮은 고형분 함량에서 급격한 점도 증가가 일어나 고분자 사슬사이의 얽힘이 쉽게 일어남을 알 수 있으며 표면장력은 -COOK 조성비가 클 경우 작은 값을 나타내었다.