• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.983-989
• /
• 2009

This study aims to systematically identify direct and indirect factors that influence labor productivity and to build a model that mathematically quantifies them so as to efficiently manage and increase labor productivity in the construction work. This study was performed based on the productivity model for workers in reinforced concrete construction projects, because it aims to establish a general construction labor productivity model that reflects many factors that influence labor productivity. Using statistical analysis, we found that the components that significantly influence productivity were the worker component, the work characteristic component, the work technique component, the work management component, the equipment & materials component, and the work guide component, while the work delay components did not significantly influence productivity. In addition, a priority analysis was performed based on the components that showed statistically significant effects. The results of the analysis indicated that the influence of work management component and the work technique component is more than that of the worker component and the work characteristic component. The construction labor productivity model that was formulated in this study could be used for the determining the standard productivity during the initial planning stage, so the best strategy for increasing labor productivity could be formulated.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1601-1611
• /
• 2007

In this paper, we presented geometric CAD watermarking scheme for Architectural design drawings using line, arc, and circle components to prevent infringement of copyright from unlawfulness reproductions and distribution. The conventional CAD watermarking scheme can be applied to both line and arc components. But the proposed scheme consists of line, arc and circle watermarking schemes for three basic components of CAD design. After extracting line, arc and circle components from designed drawing, the watermark is embedded into the length of Line component, the angle of arc component, and the radius of circle component considering the robustness against various geometric transformations. The embedding strengths in each component are determined to be preserving the transparency of the watermark. By experimental result, we confirmed the robustness and the invisibility of embedded watermarks in several conversions of architectural design drawing.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.606-617
• /
• 2018

Increased density of racks has resulted in increased use of data center cooling energy and the needs for energy efficient cooling systems has increased. In response to these needs, ASHRAE presented a performance indicator, which is Mechanical Load Component (MLC), for the purpose of evaluating systems at the design stage. However, the MLC metrics presented in the current standard can only be determined for system compliance and compared alternative systems with the system configuration completed. Therefore, there are limitations to considering MLC from the early stages of design. In this study, to extend the scope of application of MLC in the design phase, the design factors of the main equipment comprising the cooling system are classified by the MLC load component and interrelations between design factors were identified.

• Architectural research
• /
• v.16 no.4
• /
• pp.203-210
• /
• 2014

The packaged terminal air conditioner, the typical cooling system for the residential buildings, consumes a large amount of electricity in a short period time during peak hours. In order to reduce the peak load and conserve the electricity, the thermally activated building system can be used as a secondary system to handle the partial cooling load. However, the thermally activated building system may cause condensation and under-cooling. Thus, design of both systems should be performed with careful investigation in characteristics of both systems to amplify the advantages. Since the thermally activated building system has the time-delay effect which may cause under-cooling, the system is designed to handle the base load of the building. Hence, simple simulation with EnergyPlus was performed to observe the characteristics of cooling load in residential buildings. Once the possible range of the load handling ratio of the thermally activated building system was decided, characteristics of system was analyzed in terms of hardware component and operation parameters. The hardware components were analyzed in plant and system aspects and the operation parameter was evaluated in the thermal comfort aspect. As the load handling ratio increased, the thermal comfort increased due to the lower radiant mean temperatures. Within the range of thermal comfort, the several adjustments were made in setpoint temperature and electricity consumptions of difference cases were observed to decide which components and parameters were important for designing the systems.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.5
• /
• pp.117-124
• /
• 2019

Nonstructural elements are installed according to the function of a building, and refer to the elements other than a structural system that resists external loads. Although the nonstructural elements had the largest part of seismic loss of buildings, seismic design of buildings mainly focuses on structural system and the seismic design of nonstructural elements are rarely conducted. In this study, the seismic design provisions of nonstructural elements presented in Uniform Building Code (UBC) and International Building Code (IBC) were investigated in order to analyze the seismic design considerations of nonstructural elements presented in Korean Building Code (KBC). The results showed that the equivalent static load applied to seismic design of nonstructural elements was revised to take into consideration a total of five items such as effective ground acceleration, vertical amplification factor, response amplification factor, response modification factor, importance factor.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.147-154
• /
• 2004

It is the aim of this study to propose the fundamental data for the establishment of the application and qualify standard of the mixed type superplasticizer after investigating and comparing the fluidity of high flowing concrete according to the component ratio of superplasticizer such as naphthalene sulfonated and melamine sulfonated. The results of this study were shown as the followings; 1) The fluidity and adsorption ratio of cement-paste were improved according to the increasing of naphthalene sulfonated component ratio, and apparent viscosity of cement-paste was improved according to the Increasing of melamine sulfonated component ratio. 2) In case of using the granulated blast-furnace slag, the fluidity of cement-paste was considerably good and the adsorption ratio was decreased and in case of using fly-ash, the apparent viscosity and adsorption ratio of cement-paste were improved. 3) The dispersive capacity performance of concrete can be improved by means of the increasing of naphthalene sulfonated component ratio. Also the viscosity and early strength can be improved by means of the increasing of melamine sulfonated component ratio.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.3
• /
• pp.3-10
• /
• 2018

The purpose of this study is to suggest the direction and recognition for applying to component of Emotion of the elementary school space with characteristics of child development. For the accomplishment of the study is to deduce types of emotional component and characteristics of child development based on literature and advanced research related to 'Child development and behavior', 'The elementary school space', and concept of 'children' and 'emotion'. In addition, The level of recognition of teachers and students about creation plan of school space by types of emotion component and preference and relationships of students on emotion component of elementary school space is investigated. The space environment has great influence in childhood going through big changes in physical, cognitive, emotional and social ways, Providing space environment built with emotion component such as 'affordance', 'diversity', 'territoriality', and 'relationships' considering characteristics of child development is most important of all, In particular, when building indoor space in elementary schools where students going through various development stages live, providing friendly environments for emotion of children put top priority on students in the decision-making process and guaranteed the participation of students is expected.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.195-198
• /
• 2001

Components are abstractions of system level computational entities, connectors are abstractions of component interrelationships. we propose connectors as transferable abstractions of system level component interconnection and inter-operation. Connectors are architectural abstractions of component coordination in the abstract architecture of a system only. Connectors describe a collaboration rationale for component adaptations, which are then modeled in the concrete architecture of a system.

• Korean Institute of Interior Design Journal
• /
• no.25
• /
• pp.213-220
• /
• 2000

The meaning of light is not always developed aspect in process of architecture history as essence worth of the architecture. It means that architectural light is not affected simple development of civilization, but it has more complex aspect. The technology of applying architecture has continuous development of society that light is possible to extend quantity by development of technology because light is component not simple material or tools but strong worthy aspect, quality development of architecture comes true by exact understanding and application. Conversion from medieval society to modern society begins at the Industrial Revolution has new skills and materials, the architectural conform general space filled with non-characteristic light, and it gives rising to pursuit Utopia is not exist frequently. In result, light of metaphysical meaning is diminished and exterminated. In other hand light seems to be tools by development of technology in modern society, recovering its own meaning in other aspect. That light makes perfect image of architecture not by finite meaning only for simple space but by expressing strongly point that unify the whole architectural composition. Light is free from partial material of architecture. Light activates major composition through high-technology, and has possibility to carry out the essential worth animate architecture. The light expresses relative speciality for sense of place recognizes major component which the human being lives in and conform the real meaning of architecture.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.190-195
• /
• 2008

The objective of this research is to determine overall heat transfer coefficients (K-value) of exterior wall, floor, and roof of Nakseonjae, a Korean traditional residence via field measurement of transient heat flow and temperature difference across each envelope component. Heat flow sensors and T-type thermocouple were attached on the internal and the external surface of each building component, and real-time measurement data were collected for the three consecutive summer days. The K-values determined in this research showed good agreement with other results from open literature. Peak and annual thermal loads of the traditional residence estimated by a commercial energy simulation program were compared with those for a current apartment house. The traditional house showed lower annual cooling load than that of the current building. It may caused by the fact that the traditional building has less air-tight envelopes and no fenestration passing direct solar radiation into the space.