• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.19-25
• /
• 2020

This article describes the automated incubator designs for white mushrooms growing. Mongolia has a very long and cold winter, so the process of growing mushrooms is short. Therefore, we aim to design an automated incubator system that has created a favorable artificial environment for mushroom growing by examining the necessary conditions for mushroom growing. This system was designed to be able to hold for some time the required levels of soil moisture, air humidity, soil temperature, air temperature, and CO2 levels. This article presents the results of a system-based experiment that allows you to grow mushrooms for 30 days without human interference.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.144-149
• /
• 2018

The eggs are incubated for 18 days through the generator and incubated in the developing incubator. During the developmental period, the weight loss of the fetus is correlated with the ventricular formation, and the proper ventricular formation is also associated with the healthy embryonic hatching and the egg hatching rate. However, in the incubator period of the domestic hatchery, it is a reality to acquire the resultant side by the Iranian standard weight measurement with the experience of the hatchery and the person concerned and the development period without the apparatus for measuring the present weight. As a result, prevalence of early mortality, hunger and illness during hatching are frequent. Monitoring the reduction of weaning weight is crucial to obtaining chick quality and hatching performance with weight changes within the development machine. Water loss is different depending on the size of eggs, egg shell, and elder group. We can expect to increase the hatching rate by measuring the weight change in real time and optimizing the ventilation change accordingly. There is a need to develop a real-time measurement system that can control 10 to 13% reduction of the total weight during hatching. The system through this study is a way to check the one - time directly when moving the existing egg, and it is impossible to control the measurement of the fetal water evaporation within the development period. Unlike systems that do not affect the hatching rate, four load cells are connected in parallel on the Arduino sketch board and the AT-command command is used to connect the mobile phone and computer in real time. The communication speed of Bluetooth was set to 15200 to match the communication speed of Arduino and Hyper-terminal program. The real - time monitoring system was designed to visually check the change of the weight of the fetus in the artificial incubator. In this way, we aimed to improve the hatching rate and health condition of the hatching eggs.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.578-588
• /
• 2005

Face robots capable of expressing their emotional status, can be adopted as an efficient tool for friendly communication between the human and the machine. In this paper, we present a face robot actuated with artificial muscle based on dielectric elastomer. By exploiting the properties of dielectric elastomer, it is possible to actuate the covering skin, eyes as well as provide human-like expressivity without employing complicated mechanisms. The robot is driven by seven actuator modules such eye, eyebrow, eyelid, brow, cheek, jaw and neck module corresponding to movements of facial muscles. Although they are only part of the whole set of facial motions, our approach is sufficient to generate six fundamental facial expressions such as surprise, fear, angry, disgust, sadness, and happiness. In the robot, each module communicates with the others via CAN communication protocol and according to the desired emotional expressions, the facial motions are generated by combining the motions of each actuator module. A prototype of the robot has been developed and several experiments have been conducted to validate its feasibility.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.180-193
• /
• 1994

The purpose of this study was to observe the sealing ability and durability of All-Bond 2, Gluma Bonding System, Scotch bond 2 and Superbond D-liner which are dentin bonding agents used as desensitizing agents. The durability of the sealing ability of the materials were compared after 0, 140, 420, 840 tooth brushing strokes. 120 extracted teeth were divided into 5 groups and the agents were applied to the exposed dentin. No agents was applied on group I, the control group. Each specimen went through thermocycling from $5^{\circ}$ to $55^{\circ}C$, 200 times. Each group was devide into 4 subgroups and artificial tooth brushing strokes were done for 0, 140, 420, 840 times. Finally the specimens were stored in 0.5 % methylene blue solution for 24 hours in a incubator set at $37^{\circ}C$. The tooth were sectioned perpendicular to the long axis and the dye penetration ratio to the pulp was measured. The following results were obtained. 1. All four dentin bonding agents initially showed excellent sealing ability. 2. All-bond 2, Gluma Bonding System and Superbond D-liner showed durability of dentinal tubule sealing effect after 840 strokes(6-week) artificial tooth brushing. 3. Scotchbond 2 showed a significant decrease in sealing ability after 420 strokes(3-week) artificial tooth brushing. (P<0.05).

• Research in Plant Disease
• /
• v.21 no.3
• /
• pp.231-234
• /
• 2015

Elsinoe fawcettii and E. australis are two currently recognized scab pathogens of citrus. E. fawcettii has at least six pathotypes while E. australis has at least two pathotypes. Colonies of E. fawcettii and E. australis do not sporulate in artificial media including potato dextrose agar (PDA). Whiteside's method has been widely used for preparing conidial inoculum in vitro. This study was carried out to develop efficient method for conidia production from artificial media. We developed a shaking method which included the following steps: 1) Colony grown on PDA was mashed with a steel spatula; 2) Mycelia fragments were cultured in 50 ml sterilized rain water in a rotary shaker-incubator (180 rpm) at $25^{\circ}C$ for 24 h: 3) The conidia suspension was filtered through two layers of cheesecloth. Average conidia production of all isolates tested using this shaking method was approximately 13.1 times higher than that from Whiteside's method in this study.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.75-83
• /
• 2013

PURPOSE. Maxillofacial silicone elastomer is usually colored intrinsically with color pigments to match skin colors. The purpose of this study was to investigate the color stability of a maxillofacial silicone elastomer, colored with a thermochromic, color changing pigment. MATERIALS AND METHODS. Disc-shaped maxillofacial silicone specimens were prepared and divided into 3 groups: a conventionally colored control group, one group additionally colored with 0.2 wt% thermochromic pigment, and one group with 0.6 wt% thermochromic pigment. Half of the surface of each specimen was covered with an aluminium foil. All of the specimens were exposed to UV radiation in 6 hour cycles over 46 days. In between the UV exposures, half of the specimens were stored in darkness, at room temperature, and the other half was stored in an incubator, at a humidity of 97% and a temperature of $+37^{\circ}C$. Color measurements were made with a spectrophotometer and registered according to the CIELAB $L^*a^*b^*$ color model system. The changes in $L^*$, $a^*$ and $b^*$ values during artificial aging were statistically analyzed by using paired samples t-test and repeated measures ANOVA. P-values <.05 were considered as statistically significant. RESULTS. The UV exposure resulted in visually noticeable and statistically significant color changes in the $L^*$, $a^*$ and $b^*$ values in both of the test groups containing thermochromic pigment. Storage in the incubator lead to statistically significant color changes in the $a^*$ and $b^*$ values of the specimens containing thermochromic pigment, compared to those stored at room temperature. CONCLUSION. The specimens containing thermochromic pigment were very sensitive to UV radiation, and the thermochromic pigment is not suitable, as such, to be used in maxillofacial prostheses.

• Development and Reproduction
• /
• v.21 no.1
• /
• pp.101-110
• /
• 2017

On June 14, 2008 (the first experiment) and July 24, 2008 (the second experiment), the shores of the Boseong River and the sandy beaches, Seokgok-myun, Moksadong-myun, Gokseong-gun in Jeollanam Province were investigated and a total of 29 soft-shelled turtle (Tryonyx sinensis) eggs in the natural spawning nest eggs were collected (13 eggs were collected in the first experiment and 16 eggs in the second experiment). The temperatures in the natural spawning nests were $25.9-36.9{\pm}0.5^{\circ}C$, the depth of the eggs was $5.2-7.5{\pm}0.5cm$ as the distance of the average $6.4{\pm}0.5cm$. 29 eggs were scattered at least 0.2 cm interval. Artificial incubation of 29 eggs was conducted in artificial nest boxes in thermo-plastic composition of the incubator, and then incubated at $26.5-35.5{\pm}0.5^{\circ}C$, and an average constant temperature was $31.2-32.1{\pm}1.0^{\circ}C$. The incubation days ranged from 53 to 55. In case of most turtles, incubation at $31^{\circ}C$ (higher temperatures) generally produces all or mostly females, while incubation at $25^{\circ}C$(cooler temperatures) produces all or mostly males. Exceptionally, in case of genus Trionyx, the sex ratio of female : male of T. sinensis of a freshwater soft-shelled turtle was approximately 1:1, which differs from other genera of turtles and makes T. sinensis Strauch only turtles presently known to lack temperature-dependent sex determination.

• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.100-103
• /
• 1998

A survey on the incidence of metacercariae infection of Clonorchis sinensis in the fresh water fish, Pseudorasbora parva which is well known as the second intermediate host for this fluke was carried out in the upper stream of Phoung-tack stream, Kyungki province during the period of October to November 1997. Forty fish in P. parva were collected by netting, or using the bait in transparent bowls from the two different districts located in Osung-myun, Phoungtack-gun and transported to the laboratory. The body length and weight were measured. They were from 5.0 to 7.6 cm in length and 1.0 to 5.0 g in weight. A total of 40 P. parva were divided 3 groups by the size (70-79, 60-69 and 50-59 mm) and were digested by artificial digestion with pepsin-Hcl solution in a 36$\circ$C incubator and then examined the infection density of metacercariae of the fresh water fish under a binocular dissecting microscope. The incidence of metacercariae infection in P. parva was 406 of 40 examined and the metacercariae detection rate showed 77.5%. The average number of metacercariae detected in P. parva was 10.2. The results of the survey indicate that Clonorchis sinensis infection may occur by consuming raw fresh water fish caught from the upper stream of Phoungtackho, Kyungki province.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.303-309
• /
• 2012

This study was designed to provide basic data for developing a standardized caries potentiality index to help to choose snack foods with a low score on the index by investigating adolescents' snack intakes and measuring them in total saccharinity, pH, and acidogenic potential and glucosidase activity of Streptococcus mutans (S. mutans). Total 28 snack foods were selected and measured for total saccharinity (Pocket refractometer PAL-1, ATAGO) and pH with a pH meter (Mentor, Seoul, Korea). Artificial saliva was added to each sample. The experiment group was administered with S. mutans (ATCC 3692), cultured in a constant temperature incubator at $37^{\circ}C$, and measured for pH changes over five times including after 10 minutes, 30 minutes, 1 hour, and 24 hours. Each sample of 0.3 ml was added to tubes containing sucrose, galactose, or glucose to measure the glucosidase activity of S. mutans. They were then observed for glucosidase activity with colorimetry after 24 hours of culture in a constant temperature incubator at $37^{\circ}C$. The mean pH by the acidogenic potential of S. mutans was pH 5.33. The experiment group dropped in pH more than the control group due to the increasing acidogenic potential of S. mutans by glucosidase activity, recording pH 5.27 after 10 minutes, pH 5.21 after 30 minutes, pH 5.15 after 1 hour, and pH 4.80 after 24 hours. The observation results of glucosidase activity of S. mutans with colorimetry show that most of the samples were positive in orange and yellow with glucose, sucrose, and glactose recording activity of 78.58%, 75%, and 71.42%, respectively.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.195-201
• /
• 2000

This study was conducted to investigate the suitable conditions for seed germination of Rosa davurica PALL. In the characteristics of the fruit and seed of Rosa davurica, fruit length and width was 1.3cm and 0.9cm , respectively, and seed number was eighty-nine. Artificial and low temperature storage at 4$^{\circ}C$ increased the rate of split achene pericarp until 46.6% and storage at 15$^{\circ}C$ incubator decreased the rate of split achene pericarp (10.5%). The rate of seed germination of split achene pericarp in control at 15$^{\circ}C$ was 90% and of non-split achene in GA$_3$100ppm at 15$^{\circ}C$ was 36.8%. Average germination day of split achene pericarp seeds in GA$_3$150ppm at 2$0^{\circ}C$ was 4.2 days and non-split achene pericarp in GA$_3$100ppm at 2$0^{\circ}C$ was 7.3 days. Seed germination was not different between various concentrations of GA$_3$ treatments in split achene pericarp seeds but the rate of germination was more reduced in high concentration of 200ppm. Only the treatments of GA$_3$ was increased germination rate at 4$^{\circ}C$ and immature seed of Rosa davurica.