• 한국항공운항학회지
• /
• 제26권3호
• /
• pp.48-54
• /
• 2018

This paper deals with a development of a quad-rotor for a hovering attitude control. First, a rotational dynamics are derived to design an attitude controller. The attitude controller is based on PI (Proportional-Integral) controller. For a stable attitude control, an anti-windup method applies to the PI attitude controller. Additionally, a complementary filter is used to obtain more reliable attitude. Gain values of the attitude controllers based on the anti-windup method are obtained through tests. Finally, the quad-rotor with the anti-windup based PI attitude controller is developed and a hovering attitude control flight tests are performed. As a result, the developed quad-rotor is capable of stable hovering.

• 대한임베디드공학회논문지
• /
• 제7권2호
• /
• pp.61-70
• /
• 2012

This paper describes terrain-adaptive attitude controller for a hybrid mobile platform which operates in wheel & track mode. The wheel mode of the hybrid mobile platform allows quick driving performance in the flatland, while the track mode provides adaptive movement in the rough ground or stairway. The switching of the platform between two modes is automatically controlled by attitude controller algorithm. In addition, in the track mode, the platform automatically adjusts its attitude angle to overcome the obstacles in front. This paper demonstrates the attitude controller for the aforementioned wheel-track hybrid mobile platform in order to overcome terrain obstacles by using an adaptive method. The driving performance of the hybrid mobile platform has been tested and verified in various surrounding environments in both wheel and track mode. Further, this paper presents the experiments by using the track structure of mobile platform on forming adaptive attitude under various types of obstacles. The practicability and effectiveness of the proposed attitude controller of the platform has been demonstrated in urban building and a test-bed.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권2호
• /
• pp.61-68
• /
• 2005

This paper is concerned with attitude control of 2 rotor 1 DOF aerial vehicle. The proposed controller consists of two parts: the attitude estimation filter part and PID controller part. For attitude estimation, performance of 3 different filters (complementary filters, Kalman filter, indirect Kalman filters) are tested and compared. For the PID controller, characteristic ratio assignment methods are used to assign PID coefficients. Through experiments, it is shown that attitude of the vehicle successfully follows the step command.

• 제어로봇시스템학회논문지
• /
• 제8권4호
• /
• pp.313-318
• /
• 2002

A robust attitude controller using Lyapunov redesign technique for spacecraft is proposed. In this controller, qua- ternion feedback is considered to have the attitude maneuver capability very close to the eigen-axis rotation. The controller consists of three parts: the nominal feedback parts which is a PD-type controller for the nominal system without uncertainties, the additional term compensating for the gyroscopic motion, and the third part for ensuring robustness to uncertainties. Lyapunov stability criteria is applied to stability analysis. The performance of the proposed controller is demonstrated via computer simulation.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.381-388
• /
• 2014

In this paper, the attitude of a quadrotor system is controlled by a time-delayed control method which uses the previous information to cancel out uncertainties in the system. Although the linear controller works for the attitude control, the robust performance against disturbance is relatively poor. Therefore, a time-delayed controller as a robust controller is used. Experimental studies are conducted to validate the performance by the time-delayed control method. The performances of both a linear controller and a time-delayed controller are compared.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.38-44
• /
• 2003

In this study, the balance beam control subsystem, new type of construction machinery using the mechanism of CMG (control moment gyro), for the attitude control of an unstructured object such as a beam carried by a tower crane, is designed and implemented. The balance beam controller consists of a wheel spinning at high speed and an outer gimbal for controlling the attitude of the wheel. Two motors, one for the wheel and the other for the gimbal, are used. Applying force to the spin axis of the wheel, as an input of the system, leads the torque about the axis because of the gyro effects. This torque is used to control the attitude of the unstructured object in this study. For the stabilizer function, in addition, holding the load at the current position, the attitude of the wheel is freed by cutting the power applied to the gimbal motor of the balance beam controller, which result in the braking force to stop the load by gyro effect. The works presented here include the mechanical system of the balance beam controller, the remote controller, the servo controller and the control software for the system. We also present experimental results to show that the system we proposed is useful as a new construction machinery which can control the attitude of the beam hanging from a tower crane.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.303-312
• /
• 2010

This paper introduces the upper stage attitude control system of KSLV-I, which is the first space launch vehicle in Korea. The KSLV-I upper stage attitude control system consists of two electro-hydraulic actuators and a reaction control system using cold nitrogen gas. A proportional, derivative, and integral controller is designed for the electro-hydraulic thrust vectoring system, and Schmidt trigger ON/OFF controllers are designed for the reaction control system. Each attitude controller is designed to have enough stability margins. The stability and performance of KSLV-I upper stage attitude control system is verified via hardware in the loop tests. Hardware in the loop tests are accomplished for perturbed flight conditions as well as nominal flight condition. The test results show that the attitude control loop of KSLV-I upper stage is very stable and the attitude controllers perform well for all flight conditions. Attitude controllers designed in this paper have been successfully applied to the first flight of KSLV-I on August 25, 2009. The flight test results show that all attitude controllers of the KSLV-I upper stage performed well and satisfied the accuracy specifications even during abnormal flight conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1103-1106
• /
• 1996

Disturbance Accommodating Attitude control logic for 3-axis stabilized spacecraft is designed and compared with PIID control logic. PID controller provide the zero steady error for constant disturbances. PIID controller detect and cancel disturbances upto the ramp input. PID control logic is designed as the main control logic. We designed the disturbance observer to detect the effect of disturbance using the sinusoidal function. The detected disturbance are compensated by the additional control logic. The comparison simulation is conducted between PIID and PIID with DAC. The simulation results show that PIID with DAC shows the better attitude pointing accuracy.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.871-877
• /
• 2018

In this paper, we propose a triple nested PID control scheme for stable hovering of a quadrotor and propose a complementary filter based sensor fusion technique to improve the performance of attitude, altitude and velocity measurement. The triple nested controller has a structure in which a double nested attitude controller that has the angular velocity PD controller in inner loop and the angular PI controller in outer loop, is nested in a velocity control loop to enable stable hovering even in the case of disturbance. We also propose a sensor fusion technique by applying a complementary filter in order to reduce the noise and drift error included in the acceleration and gyro sensor and to measure the velocity by fusing image, gyro, and acceleration sensor. In order to verity the performance, we applied the proposed control and measurement scheme to hovering control of quadrotor.

• 전자공학회논문지SC
• /
• 제37권1호
• /
• pp.19-29
• /
• 2000

기존의 위성제어용 시뮬레이션 툴은 위성 모델을 강체로 보고, 비례-미분(Proportional-Differential)제어기를 사용하기 때문에, 이동하는 위성의 경우 오차한계범위를 벗어나 통신이 두절되는 현상이 발생할 수 있다. 따라서, 본 논문은 신속한 자세회복 및 안정된 진보적인 제어기의 설계를 위하여 이동하는 정지궤도 및 저궤도 위성에 대하여 위성을 강체 및 유연체 구조로 모델링하고, 통신두절시 신속한 자세 회복을 위한 최소시간 제어기 설계와 위성의 위치 제어시 발생하는 통신중단을 최소화 하기 위하여 기존의 PD제어기보다 정확하고 안정된 선형조절기를 상태공간 벡터를 사용하여 설계하였다. 시뮬레이션은 먼저 강체 모델과 유연체 모델을 비교하기 위하여, 이동하는 정지궤도 및 저궤도 위성에 대하여 PD제어기를 사용하여 시험되었으며, 자세이동시의 제어기의 응답특성을 분석하기 위하여, 지상의 명령에 의한 위성의 피치각을 변경하는 경우, 주기적으로 수행되는 남북 궤도 유지에 대하여 수행하였다. 그 결과, 강체모델에 대비하여 유연성 모델이 실제 상황에 근접한 결과를 가져다 주었으며, 최소시간제어기는 PD제어기 대비 약 7배 이상 빠르게 신속한 자세 회복을 가져다 주었으며, 선형조절기는 외란에 대한 적응 및 안정도, 응답속도 측면에서 장점을 나타내었다. 향후 이 위성 모델 및 제어기를 사용하여 실제 운용시 예상되는 제어기의 결과를 확인할 수 있으며, 더 나아가 새로운 제어기의 개발 및 교육 등에 유용하게 사용될 수 있을 것이다.