• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권2호
• /
• pp.88-94
• /
• 1990

Because of it's accessibility and the quantity of bone available, the ilium is a common donor site for autogenous cancellous, cortical, and corticocancellous grafts to the facial skeleton. Especially, the anterior iliac crest has been the traditional source of pelvic bone for autogenous bone grafting in the maxillofacial skeleton. Recently the need for large amounts of bone in some reconstructive procedures of the facial skeleton has led to the evaluation of posterior ilium. The posterior approach to the ilium is superior to the anterior approach when large quantities of cancellous bone are required for facial reconstruction. The posterior approach has the advantages of more available bone, fewer complications, less postoperative pain, less disturbance in ambulation, and a possible reduction in the length of hospitalization. As the posterior approach affords an almost unlimited amount of bone for autogenous grafting in the maxillofacial region, we feel its use is indicated when very large amounts of bone are required.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권5호
• /
• pp.482-487
• /
• 2006

As the uses of dental implants are prevailing, the need for sinus bone graft is increasing. Deproteinized bovine bone mineral (DBBM) was not mentioned in 1996 Sinus Bone Graft because of the deficit of the available data. Since then, many clinical and laboratory reports support the use of DBBM in the sinus bone graft procedure. In this report, the histological and clinical successes of sinus bone grafting with DBBM is discussed with available literatures. After sinus bone grafts with DBBM, the proportion of new bone formed was similar or superior to natural maxillary posterior alveolar bone after healing period of 6 months to 1 year. It seems that the grafted DBBM is not be either resorbed nor replaced with bone, but this may not disturb the osseointegration of dental implants installed into it. The clinical survival rates of dental implants installed on the sinus grafted with DBBM was similar to those installed on the ungrafted posterior maxillary alveolar ridge or grafted with autogenous bone. So, it can be concluded that DBBM can be used successfully in the sinus bone graft.

• Journal of Periodontal and Implant Science
• /
• 제35권4호
• /
• pp.863-875
• /
• 2005

Bovine bone-derived bone substitutes are widely used for treatment of bone defects in dental and orthopedic regenerative surgery. The purpose of this study was to evaluate the basic characteristics of deproteinized bovine bone mineral as a bone graft substitute. Commercially available products from three different bovine bone minerals-Bio-Oss(GeistlichPharma, Switzerland), BBP(Oscotec. Korea), Osteograf/N-300(Dentsply Friadent Ceramed, USA) - were investigated. They were evaluated by scanning electron microscopy(SEM), energy dispersive X-ray spectrometer(EDS), surface area analysis(BET), and Kjeldahl protein analysis. Cell viability on different products was evaluated by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide(MTT) assay. The results of this study indicated that each bone substitute displayed distinct surface properties. Furthermore, Kjeldahl protein analysis indicated that residual crude proteins are present in deproteinized bovine bone mineral. BBP showed relatively large amount of residual protein, which indicated that the possibility of disease transmission can not be safely ruled out. Based on the results of this study, it is suggested that active quality management is strongly needed in operations that involve processing bovine bone tissue for medical use.

• Imaging Science in Dentistry
• /
• 제33권1호
• /
• pp.35-41
• /
• 2003

Purpose: To aid in determining the volume of graft bone required before a maxillary sinus lift procedure and compare the alveolar bone height measurements taken by panoramic radiographs to those by CT images. Materials and Methods : Data obtained by both panoramic radiographs and CT examination of 25 patients were used in this study. Maxillary sinus volumes from the antral floor to heights of 5 mm, 10 mm, 15 mm, and 20 mm, were calculated. Alveolar bone height was measured on the panoramic images at each maxillary tooth site and corrected by magnification rate (PBH). Available bone height (ABH) and full bone height (FBH) was measured on reconstructed CT images. PBH was compared with ABH and FBH at the maxillary incisors, canines, premolars, and molars. Results: Volumes of the inferior portion of the sinuses were 0.55 ± 0041 ㎤ for 5 mm lifts, 2.11 ± 0.68 ㎤ for 10 mm, 4.26 ± 1.32 ㎤ for 15 mm, 6.95 ± 2.01 ㎤ for 20 mm. For the alveolar bone measurement, measurements by panoramic images were longer than available bone heights determined by CT images at the incisor and canine areas, and shorter than full bone heights on CT images at incisor, premolar, and molar areas (p<0.001). Conclusion: In bone grafting of the maxillary sinus floor, 0.96 ㎤ or more is required for a 5 mm-lift, 2.79 ㎤ or more for a 10 mm-lift, 5.58 ㎤ or more for a 15 mm-lift, and 8.96 ㎤ or more for a 20 mm-lift. Maxillary implant length determined using panoramic radiograph alone could result in underestimation or overestimation, according to the site involved.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.321-327
• /
• 2000

Statement of Problem. As a standard means of diagnostics, an orthopantomogram(OPT) permits to measure the vertical and mesiodistal dimension of available bone at the desired implant site with the help of suitable radioopaque references. Based on the clinical investigation of the dentition and the edentulous sites, information upon the width of the implant site can be obtained and documented in the dental scheme. Both findings permit together systematic primary planning for endosteal implants. Purpose of Study. Contents of the present article are the representation of a semiquantitative classification of available bone with the aim to simplify the primary phase of a systematic implant planning. Results. Thus the ASCIi- system permits a clear protocol of bone findings for the implant case with all information available during the primary appointment for treatment planning as a basis of further diagnostic and therapeutic measures. Conclusion. With the ASCIi system, important parameters such as alveolar height and sub-crestal alveolar width can be documented systematically, easily and time saving in the dental scheme as a basis for exact treatment planning.

• 대한치과보철학회지
• /
• 제38권6호
• /
• pp.814-820
• /
• 2000

Statement of Problem. Commonly used classification systems do not inform for dentists the dimension of the available bone at a potential implant site although regarding a variety of morphologic and pathophysiologic aspects using schematic graphs. However, for the implantologist the availability of bone substance is most important independent whether it concerns the jaw basis or the alveolus. Purpose of Study. The present article refers to a new evaluation form, to analyze the available bone with regard to optional immediate loading site by site. According to a new systematic implant planning concept will be presented in two case reports. Results. The feasibility of the classification for planning and documentation of immediately loaded implants is presented in two case reports. Conclusion. The factor of bone support for immediate functional stability is important in dental implantology. The new systematic implant planning helps to systematically estimate the dimension (ASCIi classification) of the alveolus site by site to evaluate the possibility of immediate loading. The Gottingen classification thus aids to determine the degree of stability that can be expected for the planned solution.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.86-91
• /
• 2000

Autogenous bone graft is the useful technique for management of various bone defect in oral and maxillofacial surgery. The most common site for bone graft harvest is the anterior iliac crest. There is usually considerable cancellous bone graft available and it can be obtained with minimal morbidity. However, complications noted in iliac crest grafts include prolonged postoperative pain, hematoma and fracture, gluteal muscle weakness. Occasionally, when large amounts of bone graft are needed and previous harvest procedure had used, iliac bone harvest may be not adequate. Like the iliac crest, the greater trochanter has abundant cancellous bone and is readily accessible with acceptable morbidity. The purpose of this study was to assess the availability of cancellous bone graft from the greater trochanter, compare the quantity with that available from the anterior iliac crest, investigate anatomical hazards, and make recommendations for consistent harvest.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.243-249
• /
• 2006

Statement of problem: It is important to have a correct presurgical treatment plan before any implant surgery. It must contain substantial information about the patient concerned. However, the standard classification only notifies the dentist about various structural, pathological and physiological dimensions Due to diverse structure of the jaw bone, current standard classification does not tell spatial dimensions of the available bone for implant insertion sites. Purpose of study: The purpose of this study is to report the establishment of the systematic implant treatment plan and its clinical treatment using $Implan^(R)$ program which is based on ASCIi-classification that is available for future diagnosis and scale of treatment and for systematic implant insertion. Results: By assisting the systemic measurement of the available alveolus dimension during implant surgery, it was easy to set initial implant treatment plan. Conclusion: Using $Implan^(R)$ program which is based on ASCIi-classification system that allows the establishment of systemic implant treatment plan and successful clinical performance, it was possible to establish the founding or initial implant treatment plan , the acquisition of information, and the systematization of documentation.

• Journal of Periodontal and Implant Science
• /
• 제47권6호
• /
• pp.388-401
• /
• 2017

Purpose: The physicochemical properties of a xenograft are very important because they strongly influence the bone regeneration capabilities of the graft material. Even though porcine xenografts have many advantages, only a few porcine xenografts are commercially available, and most of their physicochemical characteristics have yet to be reported. Thus, in this work we aimed to investigate the physicochemical characteristics of a porcine bone grafting material and compare them with those of 2 commercially available bovine xenografts to assess the potential of xenogenic porcine bone graft materials for dental applications. Methods: We used various characterization techniques, such as scanning electron microscopy, the Brunauer-Emmett-Teller adsorption method, atomic force microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and others, to compare the physicochemical properties of xenografts of different origins. Results: The porcine bone grafting material had relatively high porosity (78.4%) and a large average specific surface area (SSA; $69.9m^2/g$), with high surface roughness (10-point average roughness, $4.47{\mu}m$) and sub-100-nm hydroxyapatite crystals on the surface. Moreover, this material presented a significant fraction of sub-100-nm pores, with negligible amounts of residual organic substances. Apart from some minor differences, the overall characteristics of the porcine bone grafting material were very similar to those of one of the bovine bone grafting material. However, many of these morphostructural properties were significantly different from the other bovine bone grafting material, which exhibited relatively smooth surface morphology with a porosity of 62.0% and an average SSA of $0.5m^2/g$. Conclusions: Considering that both bovine bone grafting materials have been successfully used in oral surgery applications in the last few decades, this work shows that the porcinederived grafting material possesses most of the key physiochemical characteristics required for its application as a highly efficient xenograft material for bone replacement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제45권2호
• /
• pp.51-67
• /
• 2019

As dental implant surgery and bone grafts were widely operated in Korean dentist, many bone substitutes are commercially available, currently. For commercially used in Korea, all bone substitutes are firstly evaluated by the Ministry of Health and Welfare (MOHW) for safety and efficacy of the product. After being priced, classified, and registration by the Health Insurance Review and Assessment Service (HIRA), the post-application management is obligatory for the manufacturer (or representative importer) to receive a certificate of Good Manufacturing Practice by Ministry of Food and Drug Safety. Currently, bone substitutes are broadly classified into C group (bone union and fracture fixation), T group (human tissue), L group (general and dental material) and non-insurance material group in MOHW notification No. 2018-248. Among them, bone substitutes classified as dental materials (L7) are divided as xenograft and alloplastic bone graft. The purpose of this paper is to analyze alloplastic bone substitutes of 37 products in MOHW notification No. 2018-248 and to evaluate the reference level based on the ISI Web of Knowledge, PubMed, EMBASE (1980-2019), Cochrane Database, and Google Scholar using the criteria of registered or trademarked product name.