• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.45-50
• /
• 2015

The protection of frontal seat passengers in both driver and front seated occupant has been more focused from the auto industries as well as regulatory bodies more than 40 years. Recently, their interests have been extended to rear seat occupants especially children and female occupants. However, the current available safety devices for the rear seat occupants are seat belt only. According to the previous researchers, the injury level of the rear seat passengers tend to be higher than the injury level of the frontal seat passengers. In this study, the optimal location of seat belts anchorages to enhance rear passengers crashworthiness are studied. FEM models are designed in accordance with regulation of KMVSS102, UN R44, UN R16, and UN R14. and three point belts are fitted on the HybridIII 5th percentile dummy and HybridIII 50th percentile dummy. The combined injury value used HIC15, Nij, Chest deflection, Femur force are used to evaluate rear seat belt anchorage optimal locations.

• Korean Management Science Review
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2013

We conduct the future studies suggested by Park and Seo [3]. They considered a seat inventory control problem in which flights depart sequentially during a similar time-interval and passengers purchase available seats depending on individual customer choice behavior. Customer choice behavior can lead to one among a horizontal shift, a diversion-up, and a booking loss when a desired fare class is unavailable. We investigate how seat availability calculation method, booking limit control mechanism, seat inventory capacity, number of booking class, type of seat demand influence on revenues in an airline industry through thorough computer simulation experiments.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.507-512
• /
• 2005

Railroad transportation system has experienced major changes due to KTX introduction. Kyungbu corridor especially Seoul to Cheonan has line capacity problem and its solution has been a primary concern to researchers and policy decision makers. This study explored pattern of train operation between Seoul and Cheonan after the introduction of KTX in 2004. Both the number of trains and available seat capacity per day have increased but maximum number of trains per specific hour has not been changed much. Demand for train shows that if concentrated in a specific time, so number of trains during the peak hour should be increased. But, it is difficult ? 새 line capacity, so increasing seat capacity per train might be an option. An increase in an avaliable sear should be considered the characteristics of each train lines.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.458-461
• /
• 2003

This paper presents a concept on seat assignment systems. The concept is based on the assumption that customers or passengers prefer to select seats at their own choosing and allowing them to do so would fragment remaining seats. This undesirable condition may make a group of people intending to be seated together unable to find a sufficient number of consecutive seats. The concept proposed is to set aside a number of seats when the map of available seats is shown for customer's selection. A number of functions are created to allot seats to be visible for choosing according to the number and locations of the remaining seats and the number in the group of the passengers. Passengers' preferences such as window or aisle seating, front seating are taken into accounts. A primitive example of seat assignment system of a Boeing 717 aircraft, assuming the number of passengers in a group being 1, 2 or 3, is given based on the concept.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.2
• /
• pp.125-134
• /
• 2014

Objective: The purpose of this study is to evaluate integral seat desk used in universities through comparison of real dimension values of the desk with KS/ISO standard and questionnaire survey. Background: School furniture that helps students sit comfortably for longer periods of time and allows for better concentration on learning is important. However, seat and desk have been generally designed based on the industry practice rather than user's anthropometry, and seats and desks used in universities of Korea have not been ergonomically evaluated. Method: Real 13 dimensions of the desk used in K University were measured using tape measure and inclinometer, and the dimension values were compared to the KS standard of desk and chair for lecture room (KS G 4210) and ergonomic design principles found in relevant references. Subjective appropriacies and preference for the desk were investigated based on questionnaire survey, in which 121 (male: 91, female: 30) college students participated. Results: Several dimensions for the desk and chair investigated except desk depth and width, leg room width, seat width have not met the KS standard, but all dimensions satisfied ergonomic design principles available in references. The questionnaire survey revealed that appropriacies for desk surface size, seat pan depth, seat pan cushion and backrest curvature were under middle point of 3.0, and that those for the other dimensions showed higher scores exceeding 3.0. Conclusion: The integral seat desk widely used in universities showed some design problems in terms of standards of KS G 2010 and KS G 4210, and ergonomic design principles. Compared to the general desk with separated desk and seat, subjective preference on the integral seat desk was low. Application: This would be used as a valuable guideline when designing or choosing new integral seat desk with high satisfaction of students.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.155-163
• /
• 2006

Car seat is one the most important element to make comfortable drivability. It can absorb the impact or vibration during driving state. In addition to those factors, it is needed to have enough strength for passenger safety. From energy efficiency and environmental point of view lighter passenger car seat frame becomes hot issue in the auto industry. In this paper, weight optimization methodology is investigated for commercial car seat frame using CAE. Optimized designs for seat frame are developed using commercially available finite element code(ANSYS) and design of experiment method. At first, car seat frame is modelled using 3-D computer aided design tool(CATIA) and simplified for finite element modelling. Finite element analysis is carried out for the case of FMVSS 202 Head Restraint test to check the strength of the original seat frame. Two base brackets are selected as optimized elements that are the heaviest parts in the seat frame. After finite element analysis for the brackets with similar load condition to the previous test optimization technique is applied for 10% to 50% weight reduction. Design of experiment is utilized to obtain optimization design for the bracket based on the modified 50% weight reduction model in which outer shape of the bracket is conserved. Weight optimization models result in the decrease of the strength in spite of weight reduction. The more design points should be considered to get better optimized model. The more advanced optimization technique may be utilized for more parts of the seat frame to increase whole seat frame characteristics in the future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.17-22
• /
• 2018

A glove valve regulates the flow in a pipeline as a kind of control valve. However, when the disc and seat contact, the valve structure can be distorted and flow can leak due to the elongation of the valve material under high pressure. The surface texture is not good enough to seal the contact surface (in practice) because the lapping process is usually done manually. Furthermore, assembly performance is analyzed by structural analysis. Compared with a standard seat, the newly designed seat had a smaller radial deformation and a larger longitudinal deformation. Therefore, the newly designed seat can maintain a tight and uniform contact with the disc with a reduced radial deformation and an expanded available seal area with an increased longitudinal deformation. The seal performance of the glove valve has been improved in a cost-effective manner.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.2
• /
• pp.357-363
• /
• 2011

Objective: The aim of this study is to set the design direction of the lift chair's tilting seat for development. Background: Great attention has been shown to the development of senior friendly product, because of increasing elderly population rapidly in Korea. Therefore, we need to study on sit-to-stand(STS) motion of elderly systematically for developing lift chair that is one of senior friendly products. Method: In this study, we analyzed joint moment(knee, hip) and muscle activity (Erector spinae, Rectus femoris, Vastus lateralis) on STS motion of elderly(female, 60~70: 7) and young people(female, 20~30: 7) using 3 dimension motion capture camera, force plate, wireless EMG. Results: The results of muscle activity showed a similar trend but the results of joint moment were a lot of differences between the young and the elderly. Conclusion: The results of knee joint moment suggest the angle(10~30deg)-adjustable seat that can be better than to find the optimal seat's angle. Application: The method and results of this study are expected to develop senior friendly product and verification as well as be available to various application.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.535-538
• /
• 2006

We consider a two-period airline revenue management problem where customers may act strategically. Specifically, we study a two-fare-class airline seat inventory allocation problem which allow for the possibility that a customer may decide to defer to purchase in the hope that a cheaper ticket than those currently on offer (expensive tickets) become available. We also allow for the possibility that some customer will buy a more expensive ticket if the cheaper tickets are not available. We show how to find the optimal booking limits in the presence of such strategic customer behavior and investigate the impact of such strategic customer behavior on the expected revenue. The results are compared with those by the expected marginal seat revenue (EMSR) heuristic approach (Belobaba, 1987, 1989) with strategic customer behavior.

• Steel and Composite Structures
• /
• v.6 no.2
• /
• pp.139-157
• /
• 2006

In this paper, a cyclic mechanical model is presented to simulate the behaviour of top and seat with web angle beam-to-column connections. The introduced mechanical model is compared with Eurocode 3 Annex J, its extension, and with experimental data. To have a better insight regarding the actual response of the joints, available results of the experiments, carried out on full-scale top and seat angle joints under monotonic and cyclic loading, are first considered. Subsequently, a finite element model of the test setup is developed. The application of the proposed model, its comparisons with the experimental curves and with the Eurocode 3 Annex J and with its modification, clearly show the excellent quality of the model proposed.