• Korean Journal of Microbiology
• /
• v.45 no.3
• /
• pp.275-280
• /
• 2009

The optimal medium compositions for the production of bacterial cellulose (BC) by a Acetobacter sp. V6, which was isolated from the traditionally fermented vinegar in Korea, were investigated in static cultures. The optimum medium compositions for BC production were 3% glucose, 3% soytone, 0.8% $K_2HPO_4$, and 0.4% ethanol, respectively. Adding $NaH_2PO_4$ or $KH_2PO_4$ had not shown the increase in BC production. Under the optimum medium compositions, the highest BC production was 44.67 g/$m^2$ in 8 days and the thickness of BC pellicle was about 1 cm. Structural properties of BC produced in the optimal medium were studied using Fourier-transform infrared spectroscopy and X-ray diffractometer. BC from the optimal medium was found to be of cellulose type I, the same as typical native cellulose. No difference in the compositions between bacterial and plant celluloses, but BC showed unique micro-network structure and high crystallinity (82%).

• Preventive Nutrition and Food Science
• /
• v.7 no.1
• /
• pp.37-42
• /
• 2002

Factors affecting the production of bacterial cellulose and organic acids in Kombucha fermentation were investigated. Kombucha was obtained by the fermentation (for 12 days at 3$0^{\circ}C$) of the green/black tea extract, supplemented with 10% white sugar, using an Oriental tea fungus as starter. Hitgher initial pH increased acid production with decreased cellulose production. With a cellulose pellicle or tea fungus broth as a starter, a 1~3 mm thick cellulose layer developed as a top layer every four days, and was removed subsequently while continuing fermentation. Addition of 30 mL tea fungus broth (13%, v/v) in Kombucha fermentation resulted in maximum production of a cellulose pellicle, indicating weak acid production. Yield of cellulose production at an early stage of fermentation was also higher when Kombucha was inoculated with a cellulose pellicle. In fact, addition of 1% (v/v) alcoholic beverage in the Kombucha fermentation activated the cellulose production, coupled with four times higher acid production.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.723-726
• /
• 2001

This study was performed to improve the yield of bacterial cellulose(BC) by UV and NTG mutagenesis of strain KJ-1 which produced largely BC. some mutants showed high BC productivity with twice elevation compared to that the wild strain KJ-1. A difference was found in production and bioconversion phase of synthesized organic acid, such as gluconic acid, 2-keto gluconic acid, and 5-keto gluconic acid between mutants and strain KJ-1 in the static culture. The organic acid produced in secondary metabolism phase, were more rapidly consumed in the culture with the mutants than that the parent strain after glucose in the broth was conversed to a limiting substrate. Therefore, we suggested the reason for increasing of BC production that the mutant strain consumed more efficiently synthesized acids as substrates than that of the parent strain.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.10
• /
• pp.1341-1350
• /
• 2007

This study was designed to ultimately develop a highly efficient mass production technology of bacterial cellulose isolated from the citrus gel fermented by G. hansenii TL-2C. Pilot equipment made with FRP vessel length (665 mm) ${\times}$ width (375 mm) ${\times}$ height (210 mm) was developed for mass production of the citrus gel. To develop the optimal conditions for mass production of citrus gel, comprised of citrus juice (6,000 mL) diluted 100 times, containing 5% seed bacteria, 10% sucrose, and 1% ethanol, citrus juice was fermented at $30^{\circ}C$ for 14 days, and gel productivity in pilot system was examined. BC was isolated and purified from the citrus gel, and their chemical composition and physicochemical properties were investigated.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.7
• /
• pp.739-745
• /
• 2011

During the production of grape wine, the formation of thick leathery pellicle/bacterial cellulose (BC) at the airliquid interface was due to the bacterium, which was isolated and identified as Gluconacetobacter hansenii UAC09. Cultural conditions for bacterial cellulose production from G. hansenii UAC09 were optimized by central composite rotatable experimental design. To economize the BC production, coffee cherry husk (CCH) extract and corn steep liquor (CSL) were used as less expensive sources of carbon and nitrogen, respectively. CCH and CSL are byproducts from the coffee processing and starch processing industry, respectively. The interactions between pH (4.5-8.5), CSL (2-10%), alcohol (0.5-2%), acetic acid (0.5-2%), and water dilution rate to CCH ratio (1:1 to 1:5) were studied using response surface methodology. The optimum conditions for maximum BC production were pH (6.64), CSL (10%), alcohol (0.5%), acetic acid (1.13%), and water to CCH ratio (1:1). After 2 weeks of fermentation, the amount of BC produced was 6.24 g/l. This yield was comparable to the predicted value of 6.09 g/l. This is the first report on the optimization of the fermentation medium by RSM using CCH extract as the carbon source for BC production by G. hansenii UAC09.

• Korean Journal of Environmental Biology
• /
• v.29 no.4
• /
• pp.321-325
• /
• 2011

The mutant strain M6 derived from Acetobacter sp. A9, which produces high levels of the bacterial cellulose derived by random mutagenesis with N-methyl-N'-nitro-N-nitrosoguanidine or UV treatment, was selected by a Hestrin and Schramm medium (HSB) plate assay. The characterization of the cellulose production was studied in flask culture to improve the productivity of bacterial cellulose by $Acetobacter$ sp. A9 and mutant strain M6. The yield of cellulose production was superior to mutant M6 than $Acetobacter$ sp. A9. Cellulose was produced 0.12 g $L^{-1}$ by $Acetobacter$ sp. A9 at HS medium and the mutant M6 produced the cellulose 6.95 g $L^{-1}$at HS medium. Strain M6 produced less amount of gluconic acid than A9, thus showing that cellulose production is negatively relted with the gluconic acid production.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.42-48
• /
• 1998

The bacterial cellulose(BC) has many unique properties that are potentially and commercially beneficial. In order to enhance inherently inferior physical property of chemithermomechanical pulp(CTMP) sheet, chemical pulp has been used widely. Bacterial cellulose also has an enhanced sheet strength because of its unique physical and morphological features. This study was carried out to inverstigate the effect of BC addition on physical properties of CTMP sheets. The effect of BC addition on its optical properties was also discussed. The apparent density, internal bond strength, Young's modulus, tensile strength and folding endurance of CTMP sheet are increasing with increase of BC contents. This strength increase would be attributed to the increase of relative bonding sites among pulp fibers by addition of BC which has microfibrillar structure with very high specific surface areas. There were not so significant changes in opacity of CTMP sheet upto 20% addition level of BC, while over 40% addition, the opacity gradually decreased and levelled off. Porosity is decreased with addition of BC. This decrease would be attributed to densification of sheet by fine and filamentous structure of BC fibers.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.722-728
• /
• 2002

Eight strains producing bacterial cellulose (BC) were isolated from rotten fruits and traditionally fermented vinegars. One of the isolated strains from the rotten grape in Gwangju, Korea, maintained a relatively stable BC production in shaking cultures. This isolated strain proved to be Acetobacter xylinum, based on several biochemical and morphological tests. It was shown that the slant-baffled flask was more efficient than the conventional flask for the BC production in shaking cultures. To determine the most suitable carbon and nitrogen sources for the production of BC, various compounds were examined. Fructose was found to be the most effective carbon source with an optimal concentration of 2%. Mixed carbon source (glucose:fructose=1:3) was also better than glucose or fructose alone. Optimal nitrogen source, when basal medium was used, was 10% (v/v) com steep liquor (CSL). When com steep liquor was used with a mixed carbon source (glucose:fructose=1 :3),4% CSL exhibited the best BC production. Based on these results, a defined medium was developed for the BC production by Acetobacter xylinum KJ-1. When this medium was used under optimal culture conditions, the BC production was 7.2 g/1, which was approximately 3 times higher than that with the traditional HS medium.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.561-565
• /
• 2005

In this study, we attempted to assess the effects of lactate and com steep liquor (CSL) on the production of bacterial cellulose (BC) by Gluconacetobacter persimmonis $KJ145^T$. The optimal condition for the production of BC was a lactate concentration of 1% (w/v) and a CSL concentration of 10% (w/v). Under these optimal conditions, 6 days of fermentation produced 6.90 g/L of BC. Both the BC production yield and cell growth increased continuously until the 20th day of fermentation, by which time 17.0 g/L had been produced. In a static culture trial, in which plastic containers were used as fermentation chambers for 6 days of fermentation, the BC production yield in the group initially cultured with 500 mL medium was higher than that of the 750 and 1000 mL media. In addition, the texture of the BC was examined according to its post-treatment in order to determine conditions for optimal textural characteristics. The strength, hardness, and other characteristics of the BC were negatively correlated with sucrose concentration, but were largely positively correlated with NaCl concentration. With regards to the effect of pH on textural change, BC strength and hardness were elevated at pH 2 and 8 but reduced at pH 4 and 6, indicating that the texture of the BC is extremely sensitive to treatment conditions.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.3
• /
• pp.429-438
• /
• 2021

Bacterial cellulose (BC) is widely used in the food industry for products such as nata de coco. The mechanical properties of BC hydrogels, including stiffness and viscoelasticity, are determined by the hydrated fibril network. Generally, Komagataeibacter bacteria produce gluconic acids in a glucose medium, which may affect the pH, structure and mechanical properties of BC. In this work, the effect of pH buffer on the yields of Komagataeibacter hansenii strain ATCC 53582 was studied. The bacterium in a phosphate and phthalate buffer with low ionic strength produced a good BC yield (5.16 and 4.63 g/l respectively), but there was a substantial reduction in pH due to the accumulation of gluconic acid. However, the addition of gluconic acid enhanced the polymer density and mechanical properties of BC hydrogels. The effect was similar to that of the bacteria using glycerol in another carbon metabolism circuit, which provided good pH stability and a higher conversion rate of carbon. This study may broaden the understanding of how carbon sources affect BC biosynthesis.