• Advances in aircraft and spacecraft science
• /
• 제8권4호
• /
• pp.303-330
• /
• 2021

The paper discusses the effect of the winglets on the aerodynamic and aeroacoustic performance of Boeing 737-800 aircraft by numerical approach. For this purpose, computational fluid dynamics and fluent commercial software are used to solve the compressible flow governing equations. The RANS method and the K-ω SST turbulence model are selected to simulate the subsonic flow around the wing with acceptable accuracy and low computational cost. The main variables of steady flow around the simple and blended wing in constant atmospheric conditions are computed by numerical solution of governing equations. The solution of the acoustic field has also been accomplished by the broad-band acoustic source model. The results reveal that adding a blended winglet increases the pressure difference near the wingtip,which increases the lift force. Also, the blended winglet reduces the power and magnitude of vorticities around the wingtip, which reduces the wing's drag force. The effects of winglets on aerodynamic forces lead to a 3.8% increase in flight range and a 3.6% increase in the maximum payload of the aircraft. Also, the acoustic power level variables on the surfaces and fields around the wing have been investigated integrally and locally.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.121-128
• /
• 2008

This paper describes the modeling and autopilot design procedure of a Blended Wing-Body(BWB) UAV. The BWB UAV is a tailless design that integrates the wing and the fuselage. This configuration shows some aerodynamic advantages of lower wetted area to volume ratio and lower interference drag as compared to conventional type UAV. Also, BWB UAV may be increase payload capacity and flight range. However, despite of these benefits, this type of UAV presents several problems related to flying qualities, stability, and control. In this paper, the detailed modeling procedure of BWB UAV and stability analysis results using the linearized model at trim condition are represented. Finally, we designed the autopilot of BWB UAV based on a simple control allocation scheme and evaluated its performance through nonlinear simulation.

• 한국항공우주학회지
• /
• 제37권11호
• /
• pp.1066-1072
• /
• 2009

패널법(panel method)을 이용하여 포텐셜 유동조건에 있는 임의의 3차원 융합익기(Blended-Wing Body) 형상에 대해 정상/비정상 공력해석을 수행하였다. 본 연구 방법은 구간일정강도(piecewise constant strength) 용출(source) 및 중첩(doublet) 특이점(singularity)을 사용하고 Dirichlet 경계조건에 기초한 포텐셜 기저(potential based) 패널법과 물체고정좌표계의 각 방향에 대해 시간전진법(time-stepping method)을 결합한 방법이다. 본 프로그램은 임의의 3차원 BWB 형상 항공기의 공력해석을 빠르고 정확하게 수행할 수 있으며 BWB 항공기의 안정성을 위한 다양한 공력계수를 제공할 수 있다. 본 프로그램으로 3차원 정상/비정상 임의의 3차원 형상에 대하여 공력특성을 예측할 수 있어 BWB 항공기 설계단계, 비행 시뮬레이션과 같이 반복적 빠른 계산을 요구하는 실질적 응용에 크게 기여할 것이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.693-704
• /
• 2017

Blended-Wing-Body Underwater Glider (BWBUG), which has excellent hydrodynamic performance, is a new kind of underwater glider in recent years. In the shape optimization of BWBUG, the lift to drag ratio is often used as the optimization target. However this results in lose of internal space. In this paper, the energy reserve is defined as the direct proportional function of the internal space of BWBUG. A motion model, which relates gliding range to steady gliding motion parameters as well as energy consumption, is established by analyzing the steady-state gliding motion. The maximum gliding range is used as the optimization target instead of the lift to drag ratio to optimizing the shape of BWBUG. The result of optimization shows that the maximum gliding range of initial design is increased by 32.1% though an Efficient Global Optimization (EGO) process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.995-1006
• /
• 2015

Underwater glider, as a new kind of autonomous underwater vehicles, has many merits such as long-range, extended-duration and low costs. The shape of underwater glider is an important factor in determining the hydrodynamic efficiency. In this paper, a high lift to drag ratio configuration, the Blended-Wing-Body (BWB), is used to design a small civilian under water glider. In the parametric geometric model of the BWB underwater glider, the planform is defined with Bezier curve and linear line, and the section is defined with symmetrical airfoil NACA 0012. Computational investigations are carried out to study the hydrodynamic performance of the glider using the commercial Computational Fluid Dynamics (CFD) code Fluent. The Kriging-based genetic algorithm, called Efficient Global Optimization (EGO), is applied to hydrodynamic design optimization. The result demonstrates that the BWB underwater glider has excellent hydrodynamic performance, and the lift to drag ratio of initial design is increased by 7% in the EGO process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.455-467
• /
• 2020

Shape design optimization for Blended-wing-body Underwater Gliders (BWBUGs) is usually computationally expensive. In our previous work, a simplified shape optimization (SSO) strategy is proposed to alleviate the computational burden, which optimizes some of the Sectional Airfoils (SAs) instead of optimizing the 3-D shape of the BWBUG directly. Test results show that SSO can obtain a good result at a much smaller computational cost when three SAs are adopted. In this paper, the performance of SSO is investigated with a different number of SAs selected from the BWBUG, and the results are compared with that of the Direct Shape Optimization (DSO) strategy. Results indicate that SSO tends to perform better with more SAs or even outperforms the DSO strategy in some cases, and the amount of saved computational cost also increases when more SAs are adopted, which provides some reference significance and enlarges the applicability range of SSO.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.467-474
• /
• 2012

무인항공기의 정찰 및 정보 수집 능력을 효율적으로 수행하기 위해 장기 체공 능력이 요구된다. 분산 추진 장치는 대형 추진 장치를 복수의 소형 추진 장치들로 대체하여 추력을 얻는 장치이다. 날개의 스팬 길이를 따라 넓게 분포하여 효율이 증가하며, 유동의 흡입을 통해 경계층을 제어하고 출구에서 분사되는 흐름이 항공기에 부착되어 흐르기 때문에 양항비가 증가한다. 본 연구에서는 전익기 융합익기와 분산 추진 장치가 장기 체공 성능을 향상시키는 점에 착안하여 연구를 수행하였다. Eppler 337 에어포일 유닛에 추진 장치의 위치 및 입 출구 가로세로비 변화에 따라 나타나는 공력특성을 분석했다. CFD를 사용하여 공력해석을 수행하였고, 빠른 해석 결과를 얻을 수 있도록 팬 영역에 작동판 이론을 적용하였다. 양항비와 모멘트 비교를 통해 추진 장치의 위치 및 형상을 결정하고자 한다.

• 한국항공우주학회지
• /
• 제46권2호
• /
• pp.141-149
• /
• 2018

본 논문에서는 전익형 무인항공기의 복합손상을 고려한 신경망 적응제어기 연구 결과를 기술하였다. 여기서 복합손상이란 무인항공기의 주익과 수직미익의 동시 손상을 의미한다. 시뮬레이션을 통하여 종/횡축 불안정성과 비행역학 특성을 확인하였다. 이를 바탕으로 두 가지 형태의 역변환 제어기 기반 적응형 신경망 제어기를 설계하였다. 또한 두 가지 역변환 제어기 구조에 따라 무인항공기의 복합 손상 시 제어 성능 분석을 수행하였다. 역변환 제어기 구조에 따라서 일반 상황과 손상 상황에서 성능 차이를 확인하였다. 최종적으로 무인기에 발생된 복합손상으로 인한 항공기의 불안정성은 적용된 제어기를 통하여 극복할 수 있음을 확인하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.57-60
• /
• 2012

본 연구에서는 현재 국내외에서 연구 중인 Blended Wing Body(BWB) 항공기의 엔진흡기 유동을 해석하기 위해 익형과 비행조건을 변화시켜 가며 전산유체해석을 수행하였다. 엔진의 위치에 따라 엔진이 효율적으로 동작하기 위한 조건인 흡기에서의 유동 속도와 그 분산을 중심으로 해석한 결과 익형 표면에서는 경계층의 영향으로 엔진흡기에서 유동속도가 낮고, 속도분산이 높음을 확인할 수 있었다. 한편, 익형 아랫면에서는 높은 비행속도에서 속도분산이 급격히 증가하였다. 이를 통해, 해석에 사용한 익형이 BWB의 동체로 활용하기에 적합한 엔진흡기조건을 갖는지 판별하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.290-299
• /
• 2017

Reconfigurable flight control using various kinds of adaptive control methods has been studied since the 1970s to enhance the survivability of aircraft in case of severe in-flight failure. Early studies were mainly focused on the failure of actuators. Recently, studies of reconfigurable flight controls that can accommodate complex damage (partial wing and tail loss) in conventional aircraft were reported. However, the partial wing loss effects on the aerodynamics of conventional type aircraft are quite different to those of BWB(blended wing body) aircraft. In this paper, a reconfigurable flight control algorithm was designed using a direct model reference adaptive method to overcome the instability caused by a complex damage of a BWB aircraft. A model reference adaptive control was incorporated into the inner loop rate control system enhancing the performance of the baseline control to cope with abrupt loss of stability. Gains of the model reference adaptive control were polled out using the Liapunov's stability theorem. Outer loop attitude autopilot was designed to manage roll and pitch of the BWB UAV as well. A 6-DOF dynamic model was built-up, where the normal flight can be made to switch to the damaged state abruptly reflecting the possible real flight situation. 22% of right wing loss as well as 25% loss for both vertical tail and rudder control surface were considered in this study. Static aerodynamic coefficients were obtained via wind tunnel test. Numerical simulations were conducted to demonstrate the performance of the reconfigurable flight control system.