• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.432-434
• /
• 2004

Bluetooth is a promising wireless personal area network technology and is on the verge of being ubiquitously deployed over wide range of devices. This paper aims to implement a wireless network for image transmission using Bluetooth technology. The characteristics of Bluetooth are small size, low band width and low power consumption, However, there are some difficulties in implementing a wireless radio network using Bluetooth since a lot of repeaters may needed when Bluetooth depends a role of host on personal computer for data transmission. In this paper, a method to implement a wireless radio network is proposed and applied for image transmission using a small size microprocessor for each Bluetooth.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.476-479
• /
• 2003

Recently, Bluetooth has been regarded as a new technology for short-range wireless connection. Although initial application of Bluetooth technology has been focused mainly on replacing cables between hand-held devices due to a limited packet size and short-range, general wireless telecommunication such as PAN and Ad hoc networks via Bluetooth-equipped devices is expected to be one of the most popular applications. Wireless equipments have been used to exchange data between host and mobile unit. The exchanging data may be several bytes of control command and the value of sensors with ultra-sonic, vision sensor, and encoder from mobile robot. However, most wireless equipments have some drawbacks such as lack of authentication, large size and high price. On the other hand, the benefits of Bluetooth are small size, low power, low price except short-range. Especially, there are some difficulties when wireless modules are used in indoor environments. In this paper, a method of using wire network in Bluetooth network is investigated as a solution to overcome the short-range problem of Bluetooth and difficulty in indoor environment.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.592-594
• /
• 2004

Bluetooth 칩셋의 생산량을 보면, 보이지 않는 곳에서 Bluetooth의 성장은 계속 되고 있다. [1] 그리고 Bluetooth는 Scatternet을 구성하여 Personal Area Network의 영역을 넘어 Senssor network에 적용하는 것이 가능하다. 그러나 Bluetooth specification[2]에서는 Scatternet Formation 방법에 대해 제안하지 않는다. 이를 개선하기 위해 BTCP (Bleutooth Topology Construction Protocol)[3], Bluetree[4], Bluenet[5], TPSF(Two-Phase Scatternet Formation) protocol[6]이 제안되었다. 본 논문에서는 이러한 protocol들을 개략적으로 설명하고 그에 대한 장단점을 알아보겠다.

• The KIPS Transactions:PartA
• /
• v.11A no.6
• /
• pp.433-438
• /
• 2004

In this paper, we describes the development of Bluetooth network Access Point(AP) for the access network connection of Bluetooth devices at home. Unlike headset, mouse, and keyboard, the AP should have capability to support multiple connection and stabilized network throughput. Our AP allows various kinds of Bluetooth terminals to access the access network like xDSL and PSTN(Public Swithced Telephone Network) stably. Especially, users can access the PSTN at home instead of expensive CDMA network through the AP by using the one-phone which is the cellular phone with the Bluetooth module.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.922-925
• /
• 2004

Bluetooth technology is essentially a method for wireless connection of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments. The bluetooth system supports both point-to-point connection and point-to-multipoint connections. In point-to-multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There is one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The Bluetooth standard has been suggested that Bluetooth equipments can be used in the short-range, maximum 100 meters . It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.163-168
• /
• 2011

In this paper, we propose an emotion transfer system based on LED, which presents and transmitts users emotion through Bluetooth and ZigBee using LED light. We propose an emotional LED system interacting multiple LED lighting system and implement the proposed system using smartphone and WPAN network with Bluetooth and ZigBee. For the transmission of data, ZigBee is adopted for each LED lighting system and Bluetooth is utilized for the smartphone. Also, the LED lighting systems which are connected to smartphone have both ZigBee and Bluetooth module for the heterogeneous network. The implemented system shows the validity and applicability of the proposed system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.117-120
• /
• 2002

Bluetooth uses baseband of 2.4G ISM and composes radio Ad Hoc network based on Ad Hoc wireless connectivity which it used low power and low complexity solution. Bluetooth designed as can play detect, connect, discover service by surrounding other device even if users do not get acquainted all to Bluetooth. This paper operate wish to recognize mobility to routing algorithm how communication method and radio network in Bluetooth.

• The KIPS Transactions:PartC
• /
• v.17C no.2
• /
• pp.215-222
• /
• 2010

IEEE 802.15 WPAN(Wireless personal area network) technologies represented by Bluetooth are prevalent these days. However, they have short radio coverage and thus cannot be used to build a SNS for servicing users spread over a wide area. In this paper, we develop a mobile SNS(Social Network System) that does not necessitate any infrastructure support using the Bluetooth technology and the mobility based information dissemination technique. Using so-called mobility assisted data dissemination technique we overcome the short radio range restriction of WPAN technologies. We develop Blue Market, a free online marketplace program, as a proof of concept.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2346-2349
• /
• 2005

Distributed Autonomous Robotic System (DARS) is defined as a system that independent autonomous robots in the restricted environments infer their status from pre-assigned conditions and operate their jobs through the cooperation with each other. In the DARS, a robot contains sensor part to percept the situation around themselves, communication part to exchange information, and actuator part to do a work. Especially, in order to cooperate with other robots, communicating with other robots is one of the essential elements. Because Bluetooth has many advantages such as low power consumption, small size module package, and various standard protocols, Bluetooth is rated as one of the efficient communicating technologies which can apply to small-sized robot system. In this paper, we will develop Bluetooth communicating system for autonomous robots such as DARS robots. For this purpose, The Bluetooth communication system must have several features. The first, this system should be separated from other robot parts and operate spontaneously and independently. In other words, this communication system should have the ability to organize and maintain and reorganize a network scheme. The next, this system had better support any kinds of standard interfaces in order to guarantee flexible applicability to other embedded system. We will discuss how to construct and what kind of procedure to develop the network system.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.245-250
• /
• 2008

Recently, mobile devices have supported wireless LAN as well as bluetooth, where the services such as heterogeneous network access and seamless mobility connection are important. Even though the mobility and physical network might be varied, an efficient communication mechanism for the network access and a robust mobility management of mobile devices are needed. In this paper, we design and implement a Bluetooth system with mobile LAN access capability. The proposed system has the following features; 1) IP connection is enabled by BENP in the link layer, 2) The networks devices of heterogeneous mobile devices are integrated into a single virtual network interface, 3) IP mobility between the bluetooth and wireless LAN is supported by mobile IP. The experimented results show that the packet loss and delay time during the handover duration is reduced by predicting the handover among different networks followed by the setup of any required parameters in advance.