• The Korean Journal of Zoology
• /
• v.23 no.2
• /
• pp.69-76
• /
• 1980

Mice were dosed with $HgCl_2$ (5, 10 and 20 mg per kilogram body weight) and $CdCl_2$ (10, 15 and 20 mg per kilogram body weight) by the abdominal injection. Acid phosphatase activites of the liver at 24, 48 and 72 hours following the injection were measured by the Mundry colorimetric method using disodium p-nitrophenyl phosphate as the substrate, and the following results were obtained. The enzyme activities measured were 3.47 mg Pi/ml/0.5 hr at 24 hr and 5.00mg/ml/0.5 hr at 72hr respectively following the injection of 5 mg/kg body weight of $HgCl_2$ and 6.79 mg Pi/ml0.5 hr at 24 hr and 3.47 mg Pi/ml/0.5 hr respectively following the injection of 20 mg/kg body weight of the mercury compound, as compared with the activity of 8.3 mg Pi/ml/0.5 hr for the control. With the cadmium treatment, about 50% of the animals injected with 10mg/kg body weight, and none of the animals injected with 15 and 20mg/kg body weight, survived. Of the surviving animals, the sublethal concentration of cadmium was shown to activate the enzyme: the activities at 24, 48 and 72hr following the injection were around 11.2 mg Pi/ml/0.5 hr as compared with 8.63 mg Pi/ml/0.5 hr for the control.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.7-11
• /
• 1992

Body water compartments in vivo were determined in Holstein cattle with age ranging from 5 to 521 days to obtain an equation to estimate volumes of body water. Live weight ranged from 47 to 480 kg. Compartments were determined as antipyrine space for total body water (TBW), thiocyanate space for extracellular water (ECW) and Evans blue dye space for plasma water (PW). Body water compartments expressed as a percentage of live weight decreased as age in days increased and significantly correlated with age in days. Regression analyses revealed that prediction equations had low accuracy. Regression equations of body water compartments on live weight (WT, kg) were useful for the prediction of body fluid with a high accuracy. Live weight significantly regressed on age in days (Day), which was inferred to be utilized for estimation of standardized live weight in case animals were emaciated by certain causes such as severe diarrhea or dehydration. In conclusion, following equations were presented to estimate body water compartments of cattle in vivo : TBW in liters = $0.556({\pm}0.007)WT+10$, r = 0.993, $SE{\pm}0.7$ ECW in liters = $0.321({\pm}0.008)WT+10$, r = 0.978, $SE{\pm}0.8$ PW in liters = $0.0502({\pm}0.0012)WT+1.6$, r = 0.0983, $SE{\pm}0.1$ WT (kg) = $0.772({\pm}0.018)Day+24$, r = 0.982, $SE{\pm}2.3$.

• Environmental Analysis Health and Toxicology
• /
• v.3 no.1_2
• /
• pp.21-31
• /
• 1988

The effect of capsaicin on the toxicity of ethanol in mice were studied. Capsaicin was administered i.p. every other day for 4 weeks and 5% ethanol was provided ad libitum by tap water for 4 weeks. The administration of capsaicin 3.0 mg/kg showed the increase of body weight gain, ratio of liver wt./body wt., s-GPT. s-triglyceride and s-cholesterol, and showed the decrease of BUN as compared to control group. Capsaicin administered 3.0 mg/kg showed severe moth eaten appearance. eosinophilic necrosis and cholangitis in mouse liver The administration of 5% ethanol showed the decrease of body weight gain, ratios of liver, kidney and spleen wt./body wt., s-tryglyceride and s-cholestrol. Ethanol administered 5% solution showed little fatty change, moth eaten appearance, Kupffer cell proliferation, spotty necrosis and nuclear regeneration. The administration of capsaicin and ethanol together decreased the influence of ethanol on body weight gain, ratios of liver, kidney and spleen wt./body wt., s-triglyceride and s-cholesterol, and showed the less severe moth eaten appearance, eosinophilic necrosis and cholangitis. It might be concluded that the administration of capsaicin and ethanol together decreased the toxicity caused by capsaicin or ethanol respectively.

• Journal of the Korean Ceramic Society
• /
• v.21 no.4
• /
• pp.366-372
• /
• 1984

Unstabilized Zirconia was added to basic composition under 44$mu extrm{m}$ of 57.80wt% Clay-22.20wt% Chamotte-20.00wt% Agalmatolite system. Here the amount and the particle size of Zirconia were 5-25wt% and -20${\mu}{\textrm}{m}$ respectively and the body of these composition was first at 135$0^{\circ}C$. The results obtained from examining the properties of sintered body were as follows. 1. Firing linear shrinkage apparent density and bulk density apparent porosity and water absorption of the samples had the tend to increase according as the particle size of zirconia became larger and the amount of zirconia increased. 2. Modulus of rupture was inversely proportional to the particle size and the additive amount of zirconia, . Especially in case that the particle size of zirconia over 5${\mu}{\textrm}{m}$ and the additive amount of zirconia was 25wt% the modulus of rupture had shrunk drastically. 3. The maximum value of KIC was obtained at 20wt% additive amount of zirconia according to the each particle size of zirconia. Especially the highest value of KIC is 2, 173 M. Pa. M1/2 when the particle size of zirconia is 5~10${\mu}{\textrm}{m}$ and the additive amount is 20wt%.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.3
• /
• pp.219-228
• /
• 2009

This study was performed to evaluate a deodorant body wash with 1.0 wt% of triclosan and 0.4 wt% of bamboo salt, which have an inhibitory effect on axillary malodor. In this studies, in vitro antibacterial study and the clinical study, which was designed by randomized assignment, double-blind and cross-over, were performed. In the antibacterial study, test sample, which was body wash having 1.0 wt% of triclosan and 0.4 wt% of bamboo salt, have a potent antibacterial effect on Corynebacterium glutamicum, Corynebacterium xerosis, Corynebacterium jeikeium. In the clinical study, test sample has a potent and significant deodorizing effect on axillary malodor and an antibacterial efficacy. And its efficacy was maintained for 9 h at least. There was no side effect during the period of clinical study. Consequently, body wash, containing 1.0 wt% of triclosan and 0.4 wt% of bamboo salt, has the effectiveness and the safety about axillary malodor reduction.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.412-420
• /
• 2014

This study was performed to investigate the effect of fermented Hovenia dulcis Thunb fruit water extract on biomarkers for acute (a) ethanol-induced hangover and chronic (c) ethanol-induced liver injury in rats. For acute ethanol-induced hangover, the rats were administered distilled water (D.W., 10 mL/kg body wt.), Hovenia dulcis Thunb fruit water extract (HWE, 400 mg/10 mL/kg body wt.) and fermented HWE (FHWE, 400 mg/10 mL/kg body wt.), respectively, before 40% ethanol (5 g/kg body wt.) was administered. For chronic ethanol-induced liver injury, the rats were randomly divided into the normal control (cNC), ethanol (cET), cET-HWE and cET-FHWE groups. The cNC and cET groups were administered D.W. (10 mL/kg body wt.) before 40% alcohol (5 g/kg body wt.) was administrered for 21 days. The cET-HWE and cET-FHWE groups were administered HWE (400 mg/10 mL/kg body wt.) and FHWE (400 mg/10 mL/kg body wt.), respectively before 40% ethanol (5 g/kg body wt.) administration for 21 days. For acute ethanol-induced hangover, the serum alcohol and acetaldehyde concentrations were more significantly reduced in the aHWE and aFHWE groups than in the aET group. Moreover, the effect of FHWE was greater than that of HWE. For chronic ethanol-induced liver injury, the serum ethanol, acetaldehyde, ${\gamma}$-glutamyl transpeptidase (${\gamma}$-GTP) levels and the hepatic lipids concentration more significantly dropped in the cET-HWE and cET-FHWE groups than in the cET group. The FHWE administration showed faster recovery of the serum glucose concentration than in the cET and cET-HWE groups. The body weight reduction tended to normalize in the cET-HWE and cET-FHWE groups, which is ideal for chronic ethanol administration. These results suggest that FHWE has a protective effect against ethanol-induced liver damage, as evidenced by its ability to lower the serum ethanol and acetaldehyde concentrations after alcohol administration, and by its ability to decrease the level of ${\gamma}$-GTP and hepatic lipids. FHWE also elevated serum glucose concentration. Therefore, FHWE is effective in reducing ethanol-induced hangover and can play a beneficial role in the treatment of ethanol-induced liver damage as well as body weight reduction.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.27-32
• /
• 2020

The main cystal phases of traditional ceramics made of clay, quartz, and feldspar are mullite and cristobalite. Although mullite can provide strength to the ceramic body, it cannot be used for the heat resistant ceramics because the thermal expansion coefficient of it is relatively high as 5.3 × 10^-6/℃. In this study, development of lightweight heat resistant ceramics was tried by producing cordierite phase, of which the thermal expansion coefficient is 2.6 × 10^-6/℃, instead of forming mullite phase in the ceramic body by using Sanchung Kaolin and Jangsu gobdol sludge. It was concluded that ceramics having good heat resistant, bending strength, and refractoriness under load could be fabricated when 80 wt% of Sanchung Kaolin and 20 wt% of Jangsu gobdol sludge were used as raw materials. Also, the bulk specific gravity is 1.78, which is lighter than the existing Buncheong ware.

• Journal of the Korean Ceramic Society
• /
• v.35 no.1
• /
• pp.66-78
• /
• 1998

the microstructure and mechanical properties of seeded and ball-milled dry gels prepared by boehmite sol-gel method were discussed. The densification of seeded gels was improved with increasing seed content namely the number of seed The number of seed was 1.09, 3.35, 5.72${\times}$1012/cm3 boehmite when seeded with 1, 3, 5wt% respectively The ball milled gel contained about 0.5wt% seed and the number of seed was 4.72${\times}$1012/cm3 boehmite. The sintered density of 5wt% seeded gel was below 80% when sintered at 1300$^{\circ}C$ for 1h. On the other hand that of ball milled gel was very improved and reached to 97% In the case of 3wt% seeded gels the density over 97% was attained when sintered at 1500$^{\circ}C$for 1h. and the grain of the sintered body was several micrometers in size. However the sintered body of ball milled gel showed grain size of submicrometer when sintered at 1300$^{\circ}C$ for 1h. And this specimen showed highest harness value of 1900kg/mm2 The fracture toughness increased with increasing sintering temperature. The sintered body of ball milled gel showed the largest grain size and the highest fracture toughness without regard to sint-ering temperature.

• Journal of Powder Materials
• /
• v.15 no.5
• /
• pp.352-358
• /
• 2008

The present study focused on the synthesis of a bismuth-antimony-tellurium-based thermoelectric nanopowders using plasma arc discharge process. The chemical composition, phase structure, particle size of the synthesized powders under various synthesis conditions were analyzed using XRF, XRD and SEM. The powders as synthesized were sintered by the plasma activated sintering. The thermoelectric properties of sintered body were analyzed by measuring Seebeck coefficient, specific electric resistivity and thermal conductivity. The chemical composition of the synthesized Bi-Sb-Te-based powders approached that of the raw material with an increasing DC current of the are plasma. The synthesized Bi-Sb-Te-based powder consist of a mixed phase structure of the $Bi_{0.5}Sb_{1.5}Te_{3}$, $Bi_{2}Te_{3}$ and $Sb_{2}Te_{3}$ phases. This powder has homogeneous mixing state of two different particles in an average particle size; about 100nm and about 500nm. The figure of merit of the sintered body of the synthesized 18.75 wt.%Bi-24.68 wt.%Sb-56.57 wt.%Te nanopowder showed higher value than one of the sintered body of the mechanically milled 12.64 wt.%Bi-29.47 wt.%Sb-57.89 wt.%Te powder.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1507-1512
• /
• 1994

High strength cement hardened body was prepared by ordinary portland cement, silica-fume, super-plasticizer and the industrial by-product powder such as tailing, paper sludge ash and granulated slag. These raw materials were mixed and formed with w/c=0.18. The cement hardened body is cured in the autoclave at 18$0^{\circ}C$, 10atm. These admixtures made the compressive strength of all specimens develope by 170~230%. The highest compressive strength could be obtained by 236 MPa when mix composition was 14 wt% of silica-fume and 26 wt% of granulated slag. The compressive strength increased with decreasing the average pore size and the amount of the poe over the size of 50 nm by which the appearance of high compressive strength of the cement hardened body were mainly influenced. In the result, the hydration products were C-S-H, tobermorite and ettringite and it was realized that the reason why the cement hardened body became dense and revealed the higher strength was that those hydrates were formed inside of the pore and filled in it and the unhydrated materials played the role of an inner-filler.