• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.72-76
• /
• 2013

In this study, the boric acid which is a by-product in the esterification process to obtain norbornene diester derivatives was recovered, and then its reusability for esterification of norbornene was investigated. Four types of trialkyl borate (tributyl borate, tripentyl borate, and triisopentyl borate, trihexyl borate) were synthesized through the esterification with boric acid and four types of alcohol. Then, diester derivatives were synthesized by esterification with the synthesized trialkyl borate and norbornene dicarboxylic acid. The conversion of norbornene dicarboxylic acid is 89.50~99.31%. The boric acid which is a by-product in the esterification were recovered with NaCl salt and used for synthesizing trialkyl borate. The recovery rate was 92.43~99.35 %. When the recovered trialkyl borate was used in esterification, there are little losses of the yield. Since boric acid which is a major by-product is able to be recovered, the process is expected to be a clean technology to prevent an environmental pollution by the emission of chemical compounds.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.523-528
• /
• 2015

In this study, we investigated the effects of sulfuric acid on the synthesis of calcium borate in the artificial boron-containing brine (bittern) saturated with calcium hydroxide. For the study, we attempted to synthesize calcium borate under various conditions such as reaction temperature, reaction time, and cooling temperature after heating, and then to examine the recovery and purity of the calcium borate according to the presence or absence of sulfuric acid at each condition. The XRD analysis confirmed that, regardless of the presence of sulfuric acid, the calcium borate ($Ca_2B_2O_5{\cdot}H_2O$) was synthesized, while, in the presence of sulfuric acid, the calcium sulfate ($CaSO_4{\cdot}0.5H_2O$) was produced as a by-product. In all the experiments performed by varying the reaction temperature and time, the recovery and purity of the calcium borate without sulfuric acid were observed higher than those with it. The results indicated that the addition of sulfuric acid increased the solubility of the calcium hydroxide, but the calcium sulfate produced as a by-product could decrease the recovery and purity of the calcium borate by preventing the synthesis. In this study, the artificial boron-containing brine (bittern) (500 mg-B/L) was saturated with calcium hydroxide in the absence of sulfuric acid, and then the solution was heated at $80-105^{\circ}C$ for less than 10 minutes to synthesize the calcium borate. The recovery and purity of calcium borate were measured as high as 80 % and 96 %, respectively.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.575-580
• /
• 2011

It was investigated into the effects on zinc corrosion of the rotation speed of Zn-RDE and the oxygen concentration in borate buffer solution. Zinc corrosion was heavily influenced on the rotation speed of electrode and the oxygen concentration. We have suggested the disproportion reaction following the reversible one electron transfer as the corrosion mechanism of zinc.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2366-2372
• /
• 2023

Are borate and silicate glasses suitable for working as shieling materials against fast neutrons? To correctly answer the above question, some silicate, and borate-based glasses were fabricated and irradiated with various doses of fast neutrons varied between 1.73 and 12.10 MGy. The color and hardness of the fabricated glasses were affected by the fast neutron fluence where the transparent glasses turned colored as well as the hardness of the fabricated glasses was decreased. The gamma-ray spectrometric analysis shows a high activity concentration produced in the barium borate glasses due to the formation of radioisotopes Ba-131 and Ba-133 reaches to 5.92E+05 Bq and 4.25E+03 Bq, respectively for sample Cd-5 Batch 3. Additionally, the gamma-ray spectrometric analysis for the sodium silicate glasses shows low activity concentrations emitted from isotopes formed due to the activation of Y₂O₃-associated impurities. These activities are low compared to that emitted by barium borate-based glasses.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.5
• /
• pp.1-10
• /
• 2008

Decay and mold resistance of zinc borate (ZB) and calcium borate (CB) modified oriented strandboard (OSB) from southern mixed hardwood and southern yellow pine was investigated in this study. Brown rot fungus Gloeophyllum trabeum and white-rot fungus Trametes versicolar were used to examine the decay resistance of the OSB. The OSB test specimens were colonized by brown and white rot fungal mycelium in both the brown and white-rot culture bottles after 8 and 12 weeks, respectively. The wood species and fungus type had the significant effects on the decay resistance. Brown rot decay was evident for all untreated southern pine and mixed hardwood controls. The white-rot decay, however, did not show significant weight loss at both species control samples. The incorporation of ZB and CB composites provides suitable protection against brown-and white-rot fungi. No significant weight loss was observed from the borate treated OSB.

• Journal of the Korean earth science society
• /
• v.30 no.7
• /
• pp.801-809
• /
• 2009

The Salinas Grandes borate deposit located in Jujuy state, northern Argentina can be categorized into the playatype evaporite deposit. Major borate mineral is ulexite ($NaCaB_5O_9{\cdot}H_2O$), which boron could be originated from volcanic rocks nearby playa. The eastern part of the Jujuy state in northern Argentina belongs to the Altiplano-Puna platform which shows high altitude and semiarid climate. Lots of Mesozoic and Cenozoic volcanics that are source of boron as well as playas that are the basin for borate precipitation in the area are essential for boron evaporite deposit. Therefore, the extensive explorations for the playa-type evaporite deposit are need.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.46-57
• /
• 2007

The leachability of boron in zinc borate (ZB)-modified oriented strandboard (OSB) from southern wood species was investigated in this study. The leaching experiments were conducted by exposing edge-sealed OSB samples under running water at $31^{\circ}C$ for 8, 24, 72, and 216 h. The results from leached samples were compared with those from the unleached controls. Boron leaching of the modified OSB occurred upon the initial water exposure, and the leaching rate decreased as the leaching time increased. Initial boric acid equivalent (BAE) level, wood species, and sample thickness swelling significantly influenced the leachability. There was no consistent effect of polyethylene glycol (PEG) on zinc borate leaching. The glue-line washing within OSB due to thickness swelling of the test samples under water and decomposition of the borate to form water-soluble boric acid were thought to be two possible causes for the observed leaching. The relationship between assayed BAE and leaching time followed a decaying exponential function for zinc borate treated OSB. From the boron/zinc ratio after each leaching period, boron element in ZB was more or less leachable. The material constant of the regression models allowed comparing the leachability of the modified OSB for various wood species. An unified leaching method for treated wood composite materials is needed.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.533-539
• /
• 2013

The electrochemical corrosion and passivation of Ni rotating disk electrod in borate buffer solution was studied with potentiodynamic and electrochemical impedance spectroscopy. The mechanisms of both the active dissolution and passivation of nickel and the hydrogen evolution in reduction reaction were hypothetically established while utilizing the Tafel slope, impedance data, the rotation speed of Ni-RDE and the pH dependence of corrosion potential and current. Based on the EIS data, an equivalent circuit was suggested. In addition, carefully measured were the electrochemical parameters for specific anodic dissolution regions. It can be concluded from the data collected that the $Ni(OH)_2$ oxide film, which is primarily formed by passivation, is converted to NiO by dehydration under the influence of an electrical field.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.3
• /
• pp.24-29
• /
• 2003

This research was performed to investigate the diffusivity of borate rods in radiata pine (Pinus radiata D. Don) conditioned to 40 percent moisture content (MC). The deepest penetration of boron were observed in the longitudinal direction, followed by the radial and the tangential directions. The boron loading on the wood face adjacent to the borate rod tended to increase with diffusion time in all directions. To mathematically quantify boron diffusion, the diffusion coefficient of boron was determined using Boltzmann's transformation by assuming that it was a function of concentration only. The values of the longitudinal diffusion coefficients were between 1.3×10^-8 cm²/sec and 9.2×10^-8 cm²/sec. The radial diffusion coefficients were between 1.4×10^-8 cm²/sec and 9.5×10^-8 cm²/sec, and the tangential diffusion coefficients were between 5.2×10^-9 cm²/sec and 1.3×10^-8 cm²/sec. The differences of diffusion coefficients between the longitudinal direction and the radial direction were slight, although their concentration profiles were markedly different. This indicates that the amount of boron loading on the wood face adjacent the borate rod is one of the most important factor for boron penetration in wood with low MC.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.13-18
• /
• 1994

Sapwood samples of pitch pine were treated with disodium octaborate alone by dip-diffusion, or in combination with water-repellent preservative(WRP) and methyl metacrylate(MMA). Treated samples were subjected to an accelerated leaching test for determining the improvement of leaching resistance and to soft rot and mold tests for evaluating the increase in bioefficacy, due to the addition of WRP and MMA applied as a second treatment. The addition of WRP and MMA retarded leaching of boron to some extent from treated samples and this retardation can be explained by improved water repellency of WRP and MMA treated samples. Borate /WRP and borate /MMA systems will not qualify borate treated wood for ground and fresh water contact use but may improve performance of borate treated wood in above-ground applications not subjected to continuous wetting conditions. Bioefficacy against soft rot fungi and mold fungi was improved by a second treatment with WRP. However, improvement in the performance of borate /MMA systems was not observed. Considering improvement in both resistance of leaching and bioefficacy against micro fungi by the treatment of WRP and MMA, simultaneously, the dual treatment of borate treated wood by MMA containing co-biocides might be believed as an ideal treatment system.