• Journal of the Korean institute of surface engineering
• /
• v.19 no.3
• /
• pp.83-91
• /
• 1986

Codeposited of boron nitride(BN) particle dispersed into electroless nickel-phosphours (Ni-P) and nickel-boron(Ni-B) platings were studied for the purpose of developing the wear resistance and lubricity. BN can be codeposited from electroless nickel plating bath with $NaH_2PO_2$ and $NaBH_4$ as the reducing agents. Most dispersolids were distributed uniformly in the Ni-P and Ni-B matrix. Abrasion loss decreased with increasing amount of codeposits and reached a constant value 2.4 percent by volume percent of BN particle. The wear resistance and the friction coefficient of the heat treated BN composite coatings were improved about three times than that of as-coatings. The BN composite coatings were more wear resistance than hard chromium. Ni-B-BN composite coatings showed lower wear resistance and friction coefficient than Ni-P-BN. The BN content of the deposite was found to be 2.4 v/o for these optium conditions.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.120-125
• /
• 2018

Boron nitride nanotubes (BNNTs) are receiving great attention because of their unusual material properties, such as high thermal conductivity, mechanical strength, and electrical resistance. However, high-throughput and high-efficiency synthesis of BNNTs has been hindered due to the high boiling point of boron (${\sim}4000^{\circ}C$) and weak interaction between boron and nitrogen. Although, hydrogen-catalyzed plasma synthesis has shown potential for scalable synthesis of BNNTs, the direct use of $H_2$ gas as a precursor material is not strongly recommended, as it is extremely flammable. In the present study, BNNTs have been synthesized using radio-frequency inductively coupled thermal plasma (RF-ITP) catalyzed by solid-state ammonium chloride ($NH_4Cl$), a safe catalyst materials for BNNT synthesis. Similar to BNNTs synthesized from h-BN (hexagonal boron nitride) + $H_2$, successful fabrication of BNNTs synthesized from $h-BN+NH_4Cl$ is confirmed by their sheet-like properties, FE-SEM images, and XRD analysis. In addition, improved dispersion properties in aqueous solution are found in BNNTs synthesized from $h-BN+NH_4Cl$.

• Vacuum Magazine
• /
• v.3 no.3
• /
• pp.19-23
• /
• 2016

BNNTs (Boron nitride nanotubes) is an analogue of CNTs (Carbon Nanotubes) in terms of lattice structure. In BNNTs, a boron atom forms sp2 hybridized bonding with three nitrogen atoms, and so does a nitrogen with three boron atoms in the honeycomb structure. Its innovative properties, such as high thermal conductivity, neutron shielding capability, superb oxidation resistance at $900^{\circ}C$, excellent chemical resistance, and superior mechanical properties are advantageous for a wide range of applications, especially for electric device packages, neutron shielding, protective coating materials, and functional composites. In this paper, boron nitride nanotube synthesis, properties and application are reviewed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.344.2-344.2
• /
• 2016

Fully and partially grown hexagonal boron nitride (h-BN) on Cu foil, synthesized by chemical vapor deposition method, was studied using Raman and SEM measurements. Fully and partially grown samples were successfully made from borane-ammonia complex to controlling pressure and growth time. The fully grown h-BN and partially grown h-BN exhibits a ~ 1370 cm-1 B-N vibrational mode (E2g). Especially, well-aligned triangular h-BN monolayer was observed on some domain of Cu foil using SEM measurements.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.170-170
• /
• 2013

We present a novel etching technique for 2-dimentional (2-D) hexagonal boron nitride (h-BN) by using capacitively coupled plasma (CCP) of oxygen combined with a post-treatment by de-ionized (DI) water. Oxygen CCP etching process for h-BN has been systematically studied. It is found that a passivation layer was generated to obstruct further etching while it can be easily and radically removed by DI water. An essential cleaning effect also has been observed in the etching process, organic residues are successfully removed and the surface roughness has much decreased. Considering h-BN is the most important 2-D dielectric material and its potential application for graphene to silicon-based electronic devices, such an etching method can be widely used to control the 2-D h-BN thickness and improve the surface quality.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.637-639
• /
• 2010

Hexagonal boron nitride (BN) films were prepared. The process involved, spraying BN powder-dispersed $H_3BO_4-BCl_3$-ethyl alcohol solution on quartz plates, and the drying off quartz plates before, and annealing at $1070^{\circ}C$ in a nitrogen atmosphere. The optical energy band gap of the BN films was 5.28 eV. Photoluminescence peaks with energies of 3.44, 3.16, 2.97, and 2.35 eV at 10 K were observed and analyzed. Accordingly, these have resulted from donor-acceptor pair recombinations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.192-192
• /
• 2012

The next generation electronics need to not only be smaller but also be more flexible. To meet such demands, electronic devices using two dimensional (2D) atomic crystals like graphene, hexagonal boron nitride (h-BN), molybdenum disulfate ($MoS_2$) and organic thin film have been studied intensely. In this talk, I will demonstrate the $MoS_2$ field effect transistor (FET) toward performance enhancement by insulating h-BN substrate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.382-382
• /
• 2011

이차원 결정인 그래핀(graphene)은 전하도핑(charge doping)과 기계적 변형에 민감하기 때문에 기판의 물리 및 화학적 구조 및 특성에 따라 그래핀의 물성이 크게 영향을 받는다고 알려져 있다. 특히 널리 사용되고 있는 산화실리콘($SiO_2$/Si) 기판에 존재하는 나노미터 크기의 굴곡과 전하 트랩(charge trap)은 전하 이동도 및 화학적 안정성 등의 면에서 그래핀 고유의 뛰어난 물성을 제한하는 것으로 알려져 있다. 본 연구에서는 비정질 산화실리콘 기판을 대조군으로 삼아 편평도가 높은 결정성 h-BN (hexagonal boron nitride) 기판이 그래핀에 미치는 영향을 관찰하였다. 화학기상증착법(chemical vapor deposition 또는 CVD)으로 성장시킨 그래핀을 각 기판에 전사시킨 후 라만 분광법을 통해 전하 도핑 및 기계적 변형 정도를 측정하였다. h-BN 위에서는 외부 환경에서 기인하는 전하 도핑 정도가 산화실리콘 기판보다 적게 관찰되었다. 또한 h-BN 위에 고착된 그래핀 시료에서는 기판-그래핀 상호작용에서 기인하는 것으로 보이는 새로운 라만 분광 특성이 관찰되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.591-591
• /
• 2013

Fully and partially grown hexagonal boron nitride (h-BN) on Cu foil, synthesized by chemical vapor deposition method, was studied using Raman and SEM measurements. Fully and partially grown samples were successfully made from borane-ammonia complex to controlling pressure and growth time. The fully grown h-BN and partially grown h-BN exhibits a ~1,370 $cm^{-1}$ B-N vibrational mode ($E_{2g}$) Especially, well-aligned triangular h-BN monolayer was observed on some domain of Cu foil using SEM measurements.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.3
• /
• pp.23-25
• /
• 2004

The defect formation energy of boron nitride (BN) nanotubes is investigated using molecular-dynamics simulation. Although the defect with tetragon-octagon pairs (4-88-4) is favored in the flat cap of BN nanotubes, BN clusters, and the growth of BN nanotubes, the formation energy of the 4-88-4 defect is significantly higher than that of the pentagon-heptagon pairs (5-77-5) defect in BN nanotubes. The 5-77-5 defect reduces the effect of the structural distortion caused by the 4-88-4 defect, in spite of homoelemental bonds.