• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1660-1665
• /
• 2003

On this study, we improved the efficiency applying algorithm that is repeatedly using orthogonal array in discrete design space and filling a defect of gradient method in continuous design space. we showed optimal ply angle that maximized 1st natural frequency of CFRP laminated composite cantilever plate by each aspect ratio. A finite element analysis on the CFRP laminated composite cantilever plate using orthogonal array is carried out, and the results are compared with those obtained by modal testing.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.273-278
• /
• 2008

In this paper, effects of thermoelastic stress by using lock-in thermography was measured in the cantilever beam. In experiment, a circular holed plate was applied to analyze variation of transient stress under the condition of repeated cyclic loading. And the finite element modal analysis as computational work was performed. According to the surface temperature obtained from infrared thermography, the stress of the nearby hole was predicted based on thermoelastic equation. As results, each stress distributions between 2nd and 3rd vibration mode were qualitatively and quantitatively investigated, respectively. Also, dynamic stress concentration factors according to the change of vibration amplitude were estimated for the resonance frequency.

• 비파괴검사학회지
• /
• 제31권2호
• /
• pp.174-180
• /
• 2011

본 연구에서는 초음파원자현미경을 이용하여 비파괴적인 표면탄성이미지 분석과 나노표면에서의 기계적 물성 평가를 연구하였다. 이를 위해 접촉역학 특성에 따른 캔틸레버의 공진주파수 변화를 이론적으로 해석하고 실험적으로 측정하였다. 스프링-질량 모델과 Herzian 이론을 이용하여 계산한 이론적인 접촉공천주파수는 초음파원자현미경 캔틸레버의 실험적인 접촉 공진주파수의 변화와 매우 유사하였다. 결과적으로, 초음파원자현미경의 표면 높이 이미지와 진폭이미지를 성공적으로 얻을 수 있었고 진폭신호를 통하여 시료표면에서의 탄성특성을 정성적으로 평가하였다.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.935-942
• /
• 2009

In this paper, the purpose is to investigate the natural frequency of a cracked Timoshenko cantilever beams by FEM(finite element method) and experiment. In addition, a method for detection of crack in a cantilever beams is presented based on natural frequency measurements. The governing differential equations of a Timoshenko beam are derived via Hamilton's principle. The two coupled governing differential equations are reduced to one fourth order ordinary differential equation in terms of the flexural displacement. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. The detection method of a crack location in a beam based on the frequency measurements is extended here to Timoshenko beams, taking the effects of both the shear deformation and the rotational inertia into account. The differences between the actual and predicted crack positions and sizes are less than 6 % and 23 % respectively.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.132-138
• /
• 2010

본 연구에서는 접촉역학 특성에 의한 캔틸레버 탑의 접촉-진동을 연구하고 나노스케일의 표면에서 탄성특성을 이미지화 하였다. 스프링-질량 모텔과 Herzian 이론을 이용하여 접촉공진주파수를 이론적으로 계산하고 초음파원자현미경을 이용하여 캔틸레버의 자유공진주파수와 접촉공진주파수의 변화를 분석하였다. 또한, 프로토타입의 초음파원자현미경을 이용하여 구상화 열처리된 시험편의 탄성 이미지를 위상과 진폭 신호를 이용하여 성공적으로 얻을 수 었었다.

• 비파괴검사학회지
• /
• 제34권6호
• /
• pp.447-456
• /
• 2014

In this paper, a new damage-detection method based on structural vibration is proposed. The essence of the proposed method is the detection of abrupt changes in rotation. Damage-induced rotation (DIR), which is determined from the modal flexibility of the structure, initially occurs only at a specific damaged location. Therefore, damage can be localized by evaluating abrupt changes in rotation. We conducted numerical simulations of two damage scenarios using a 10-story cantilever-type building model. Measurement noise was also considered in the simulation. We compared the sensitivity of the proposed method to localize damage to that of two conventional modal-flexibility-based damage-detection methods, i.e., uniform load surface (ULS) and ULS curvature. The proposed method was able to localize damage in both damage scenarios for cantilever structures, but the conventional methods could not.

• 한국기계가공학회지
• /
• 제9권3호
• /
• pp.49-55
• /
• 2010

In this paper, the stability of cracked cantilever T-beams subjected to subtangential follower force is investigated. Also, the effect of subtangential coefficient and crack on the natural frequency of T-beams is presented. Based on the Euler-Bernoulli beam theory, the equation of motion is derived by the energy expressions using extended Hamilton's Principle. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. The values of critical follower force and the stability maps of cantilever T-beams are obtained according to the subtangential coefficient and crack severity. The results of this study will contribute to the safety testing and the stability estimation of cracked T-beams subjected to follower force.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.485-486
• /
• 2013

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1499-1507
• /
• 2017

This paper presents an impact-based piezoelectric vibration energy harvester using a freely movable metal sphere and a piezoceramic fiber-based MFC (Macro Fiber Composite) as piezoelectric cantilever. The free motion of the metal sphere, which impacts both ends of the cavity in an aluminum housing, generates power across a cantilever-type MFC beam in response to low frequency vibration such as human-body-induced motion. Impacting force of the spherical proof mass is transformed into the vibration of the piezoelectric cantilever indirectly via the aluminum housing. A proof-of-concept energy harvesting device has been fabricated and tested. Effect of the indirect impact-based system has been tested and compared with the direct impact-based counterpart. Maximum peak-to-peak open circuit voltage of 39.8V and average power of $598.9{\mu}W$ have been obtained at 3g acceleration at 18Hz. Long-term reliability of the fabricated device has been verified by cyclic testing. For the improvement of output performance and reliability, various devices have been tested and compared. Using device fabricated with anodized aluminum housing, maximum peak-to-peak open-circuit voltage of 34.4V and average power of $372.8{\mu}W$ have been obtained at 3g excitation at 20Hz. In terms of reliability, housing with 0.5mm-thick steel plate and anodized aluminum gave improved results with reduced power reduction during initial phase of the cyclic testing.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.661-669
• /
• 1999

프로브 카드는 IC(integrated circuit) 칩을 테스트할 때, 테스트 시스템의 가장 중요한 부분의 하나이다. 본 연구는 다수의 반도체 칩을 동시에 테스트 할 수 있는 범프(bump)형 수직형 프로브 카드에 관한 것이다. 프로브는 범프 팁을 가지는 실리콘 캔틸레버로 구성되어 있다. 캔틸레버의 최적 크기를 결정하기 위하여 캔틸레버의 크기는 유한요소해석에 의하여 결정되었다. 프로브는 SDB웨이퍼를 사용하여 RIE, 등방성 에칭, 그리고 벌크 마이크로머시닝에 의하여 제조되었다. FEM에 의해 결정된 최적 크기로 제작된 프로브 카드는 범프의 높이가 30$\mum$, 캔틸레버의 두께가 $\mum$, 빔의 폭이 100 $\mum$, 길이가 400 $\mum$, 이었다. 제조된 프로브 카드의 접촉 테스트에서 측정된 접촉 저항은 $2 \Omega$ 미만이고, 2만회의 접촉동안 접촉 저항의 변화가 거의 없는 특성을 보였다. 따라서 20,000회 이상의 수명을 가질 수 있음을 알 수 있었다.