• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.189-195
• /
• 2004

Carbon black have not been used as pigment material in cosmetic because of very low density and dispersity, but carbon black have applicable character as black pigment because of non-toxic, stable physico-chemical property, and black colority. In this study, mesoporous silica samples were synthesized by sol-gel reaction using surfactants-template method; TEOS (tetraethoxysilane) - a) PEO/lecithin, b) PEO/polyethylene glycol, c) lecithin/polyethylene glycol in ethanol/water solution. Synthesized organic-inorganic hybrid - silica were heat-treated in N2 condition at 500$^{\circ}C$. Mesoporous silica with black carbon in pore have the effective density and show the good dispersity in both hydrophilic and hydrophobic solvent. Properties of the samples were measured; specific surface area (750㎡/g) and pore size (4-6nm) using BET, pore structure (cylindrical type) using XRD, morphology (spherical powder with 0.1-0.5$\mu\textrm{m}$ partical size) of the samples using SEM. Carbon-silica black color applied to mascara, it shows a dark black colority and good dispersity as compared with the general black color titania pigment. Moreover, it is possible to control the density of black color pigment because it is possible to control pore volume and particle size of mesoporous silica properly. It show the good volume effects in mascara. That is why possible to apply all kinds of cosmetic products.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.308-312
• /
• 2003

Recently the trend of new materials development is extensively and very actively progressing in the study of physical and chemical characteristics developing a totally new material along with the study field of recently discovered material modifying physically and chemically characteristics. Among these fields of studies, one method to improve adaptation of inorganic material is the study of mesoporous materials. The most general way to synthesize mesoporous materials is to mold the very systematical mesopore into a corpuscle by using templates(omitted)

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.35-40
• /
• 1999

For application of a yellow pigment as food additives, stability of a water-soluble yellow pigment from Bacillus sp. PY123 was investigated. The yellow pigment from Bacillus sp. PY123 was purified with pH treatment, activated carbon and silica gel column chromatography. The partial purified yellow pigment appeared only one spot on silica gel TLC after 12 evaporation and under irradiation of UV 253nm at dark room. Rf value of the pigment was measured at 0.04 and 0.12 with development of a solvent mixture (Butanol : Acetic acid : water = 4 :1:5) and a solvent mixture (Isopropanol : Ammonia : Water = 9 :1: 2), respectively, The partial purified pigment appeared a white fluorescence under UV365nm irradiation. The partial purified yellow pigment had a main peak and a minor peak on HPLC using 20mM phosphate buffer(pH 7.0) at 1ml/min flow rate. The partial purified pigment was stable at heat treatment, acidic pH, oxide-reductants and surfactants.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.193-204
• /
• 2003

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.283-289
• /
• 1998

A bacterial strain KH-95 producing a high concentration of red pigment was isolated from the soil. The strain KH-95 was identified as a strain of Serratia sp. based on morphological and physiological characteristics. The optimal temperature and initial pH range for the production of pigment were 28$^{\circ}C$ and 7.0-8.0, respectively. The red pigment was purified through solvent extraction and silica gel column chromatography. Analyzing the structure of this pigment by instrumental analysis, it was identified as prodigiosin-like compound. In optimization of carbon and nitrogen sources, all carbon sources tested in this work inhibited the production of pigment except oils. Casein fumed out to be the most suitable nitrogen source for pigment production. Other nitrogen sources such as yeast extract, beef extract and peptone showed good cell growth but potently inhibited the production of pigment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.181-188
• /
• 2013

This paper is to investigate experimentally an effect of carbon amino silica black-superplasticizer(CASB-SP)on the engineering properties and chromaticity of black color concrete with 0.45 of W/C(water to cement). CASB-SP and carbon black were applied for pigment of the concrete. To prevent efflorescence of concrete, four different water repellent agents were also applied. As results, it was found that use of CASB-SP increased the slump and air contents. Furthermore, the use of CASB-SP increased the compressive strength. As CASB-SP dosages increased, chromaticity was well developed. For the effect of water repellent agent, the use of epoxy type was effective for protection from efflorescence. Based on test results, it was evaluated that 0.5% of CASB-SP effectively improve the concrete quality as well as enhance the chromaticity with proper dosage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.317-327
• /
• 2013

Air pollution and artificial heat of urban areas have caused the urban heat island in which asphalt pavements absorb solar heat during the daytime and release the heat at night. Hence, in order to improve the environment of urban areas, it is necessary to examine cooling pavements that can reduce heat on road pavements in urban areas. The application of temperature insulation paints on road pavements require to reduce black brightness for visibility, to increase the reflection rate of infrared light and minimize the reflection rate of visible light. In the study, one part of Acrylic-emulsion was used as a main binder, and the changes in black brightness and the changes of addition ratio (0%, 15%, 30%) of hollow ceramics, as well as kinds of paints (carbon black pigment, mixed mineral pigment) were selected as the main experimental factors. The performance of temperature reduction of cooling pavements was analyzed through the reflection rate of spectrum, the reflection rate of solar heat, and the lamp test. Abrasion resistance, UV accelerated weather resistance, and sliding resistance were tested in real situations. In addition, the performance of heat reduction of testing pavements covered with high-reflection paints was analyzed by using an infrared camera. As the test results, when using mixed mineral paints and hollow ceramic of 30%, the reflection rate of spectrum was 43% in the area of near-infrared ray and 17% in the area of visible light at black brightness of $L^*$=42.89 and the reflection rate of solar heat was 27.5%. Total color difference was ${\Delta}E$=0.27 in the test of UV Accelerated Weather Resistance, indicating almost no changes in color. BPN was more than 53 when scattering #2 and #4 silica sand of more than $0.12kg/m^2$. In Taber's abrasion resistance test, abrasion loss was up to 86.4mg at 500 rotations. The performance of heat reduction was evaluated using an infrared camera at the test section applying high-reflection paints to asphalt pavements, in which the results showed that the temperature was reduced by $12.7^{\circ}C$ on CI-30-40 cooling pavements ($L^*$=38.76) and by $14.2^{\circ}C$ on CI-30-60 cooling pavements ($L^*$=57.12).