• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.974-977
• /
• 1999

In this paper, we have proposed the hardware architecture which implements the algorithm for retaining the connectivity which prevents disconnecting in the gray-scale image thinning To perform the image thinning in a real time which find a skeleton in image, it is necessary to examine the connectivity of the skeleton in a real time. The proposed architecture finds the connectivity number in the 4-clock period. The architecture is consists of three blocks, PS(Parallel to Serial) Converter and State Generator and Ridge Checker. The PS Converter changes the 3$\times$3 gray level image to four sets of image pixels. The State Generator examine the connectivity of the central pixel by searching the data from the PS Converter. the 3$\times$3 gray level image determines. The Ridge Checker determines whether the central pixel is on the skeleton or not The proposed architecture finds the connectivity of the central pixel in a 3$\times$3 gray level image in the 4-clocks. The total circuits are verified by the design tools and operate correctly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1326-1329
• /
• 2009

In large-area LCD displays, we have developed two new control technologies for high-power LED backlight. The Novel control technology called scanning control and local gray control. In addition, a conceptual display system power management was developed. We have implemented high power-LED module driving system which can achieve power saving and cost down. Finally, we designed LED light-bar module of the side type as a backlight source. It not only achieved light & thin but also reduced the quantity of LEDs.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.2
• /
• pp.513-521
• /
• 2000

This study was carried out to investigate the effects of electrical stimulation on the change Tyrosine-Hydroxylase immunoreactive(TH-IR) cells in the Central gray and retrorubral field of the male SD rats. 9 healthy and normal rats were divided into three groups, 3 SD rat in each group. The one group has been stimulated by electroacupuncture(EA, 2Hz) for 30min and the other group by EA for 1hr 30min and control group has been stimulated. TH-IR cells were found in the Central gray(CG) and Retrorubral field(RF). The numbers of TH-IR cells of CG and RF were significantly increased after 30 min (CG $6.2{\pm}0.83$, RF $1.4{\pm}0.55$)as compared with control group(CG $24{\pm}3.16$, RF $6.4{\pm}0.55$) and were also significantly increased after 1hr 30min(CG $75.6{\pm}4.51$, RF $18.8{\pm}0.89$) than 30min. These results show that TH is related into CG and RF in response to electrical stimulation.

• Korean Journal of Veterinary Research
• /
• v.33 no.3
• /
• pp.361-368
• /
• 1993

The midbrain periaqueductal gray is a midline structure that encircles the mesencephalic aqueduct of midbrain and plays an important role in anaglgesia and modulation of nociceptive input to the central nervous system. It has been demonstrated that the periaqueductal gray contains several neuropeptides including neurotensin, which has been postulated antinociceptive effect to the periaqueductal gray. The present study was performed to provide immunohistochemical localization of neurotensin of midbrain periaqueductal gray in the Korean native goat by using immunohistochemical method. Neurotensin-like immunireactive neurons were localized throughout the midbrain periaqueductal gray, although more immunoreactive neurons were present in the middle and caudal parts of periaquductal gray than the rostral part. Dense neurotensin-like immunoreactive neurons were much more numerous in the ventral lateral division of the mid- and caudal periaqueductal grays. Neurotensin-like immunoreactive neurons were much larger and more prominent near the external margin of the gray than in the juxta-aqueductal region. Neurotensin-like immunoreactive fibers were observed as short processes extending from immunoreactive cells and some small immunoreactive puncta and varicose-like fibers were also seen.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.23-28
• /
• 2002

In this paper, we have proposed the hardware architecture which implements the algorithm for retaining the connectivity which prevents the disconnection in the gray-scale image thinning. To extract the skeleton from the image in a real time, it is necessary to examine the connectivity of the skeleton in a real time. The proposed architecture finds the connectivity number in the 4-clock period. The architecture consists of three blocks, PS(Parallel to Serial) Converter and Stare Generator and Ridge Checker. The PS Converter changes the 3$\times$3 gray level image to four sets of image pixels. The State Generator examines the connectivity of the central pixel by searching the data from the PS Converter. The Ridge Checker determines whether the central pixel is on the skeleton or not. The proposed architecture finds the connectivity of the central pixel in a 3$\times$3 gray level image in the 4-clocks. The total circuits are verified by the design tools and operate correctly.

• Journal of Ginseng Research
• /
• v.32 no.1
• /
• pp.26-32
• /
• 2008

A total of 29 Botrytis were isolated from ginseng gray mold at 8 locations in Korea from June to July, 2004 and 2005. The causative agent of them was identified as Botrytis cinerea based on morphological characteristics of conidia and RPB2 gene sequence analysis. In inoculation experiments with sclerotia, one isolate was pathogenic to ginseng plant whereas two isolates were non-pathogenic. Scanning electron microscopy revealed that the sclerotia of pathogenic isolate has rough surface and that of non-pathogenic isolate very smooth surface. Optimum temperature and culture conditions for sclerotia production were $5{\sim}20^{\circ}C$ and darkness, respectively. The number of sclerotia was increased tenfold on media added with 0.5% old stem fragment of ginseng.

• Journal of Mechanical Science and Technology
• /
• v.19 no.10
• /
• pp.1856-1863
• /
• 2005

In this study, a visual sensor system for weld seam tracking the I-butt weld joints in GMA welding was constructed. The sensor system consists of a CCD camera, a diode laser with a cylindrical lens and a band-pass-filter to overcome the degrading of image due to spatters and arc light. In order to obtain the enhanced image, quantitative relationship between laser intensity and iris opening was investigated. Throughout the repeated experiments, the shutter speed was set at 1/1000 second for minimizing the effect of spatters on the image, and therefore the image without the spatter traces could be obtained. Region of interest was defined from the entire image and gray level of the searched laser stripe was compared to that of weld line. The differences between these gray levels lead to spot the position of weld joint using central difference method. The results showed that, as long as weld line is within $\pm15^{o}$ from the longitudinal straight line, the system constructed in this study could track the weld line successfully. Since the processing time is no longer than 0.05 sec, it is expected that the developed method could be adopted to high speed welding such as laser welding.

• The Plant Pathology Journal
• /
• v.17 no.6
• /
• pp.367.2-367
• /
• 2001

• The Plant Pathology Journal
• /
• v.17 no.6
• /
• pp.357-360
• /
• 2001

Gray mold was observed on leaves of castor bean grown in Woniu and Okcheon in Korea in October 2000. Symptoms developed in the form of spot and blight with sporulation of the causal fungi at the marginal or central parts of the leaves. A total of 25 isolates were obtained from the infected leaves of castor bean. Out of the 25 isolates, 5 isolates which originated from Woniu were identified as Botrytis cinerea, while 20 isolates from Okcheon were identified as Amphobotrys ricini based on morphological and cultural characteristics. Two isolates each of B. cinerea and A. ricini were tested for their pathogenicity to castor bean plants. Gray mold symptoms similar to those observed in the fields were induced on leaves of castor bean by artificial inoculation. This is the first report of gray mold in castor bean caused by B. cinerea and A. ricini in Korea.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.18 no.1
• /
• pp.50-60
• /
• 2005

Objective : We have studied to know effects of Ligigeopoongsan(LGS, 理氣祛風散) on mechanical allodynia, cold allodynia and c-Fos protein expression in the model of neuropathic pain of rats. Methods : The model of neuropathic pain was made by injured tibial nerve and sural never while common peroneal never was maintained. After 2weeks, we performed behavioral test for 7 days to try out mechanical allodynia using von frey filament and cold allodynia using acetone, which are calculated by counting withdrawal response on foot. Rat brains removed and sliced on 8th days. Serial sections were immunohistochemically reacted with polyclonal c-Fos antibody. The numbers of c-Fos protein immunoreactive neurons in the central gray were examined using scion image program. Results : 1. Mechanical allodynia in LGS-2, LGS-3 groups were significantly diminished compared with the control group. 2. Cold allodynia in LGS-3 group was significantly diminished compared with the control group. 3. c-Fos protein expression on the central gray LGS-2, LGS-3 groups were significantly lower than that of control group. conclusions : We have noticed that LGS(理氣祛風散) diminished mechanical and cold allodynia in the model of neuropathic pain compared with the control group. c-Fos protein expression in the central gray of that group was also decreased compared with the control group. Pain control group were LGS was accumulated time goes by. This study can be used as a basic resource on a study and a treatment of pain.