• 가정과삶의질연구
• /
• 제25권6호
• /
• pp.95-109
• /
• 2007

The purpose of this research was to evaluate the effect of ceramic activities on elderly depression and life satisfaction. The research design was based on one group, with a pre and post-test study design. The subjects of this study included twelve elderly from anelderly daytime care center in Yang-san. Instruments used in this research were KGDS (Korea Form of Geriatric Depression Scale) developed by Jung et al., and a form of life satisfaction developed by Youn. A one-hour ceramic activity was offered to participants weekly, for five weeks. The results showed that depression and life satisfaction changed after the ceramic activities. The participants produced results of emotional aspects for demented old people. More specifically and significantly, positive emotions such as pleasure, in-terest, and tranquility were increased, while negative emotions such as anger or depression were significantly decreased through the ceramic activities. Thus, this study's ceramic activities program appeared to have beneficial effects on elderly depression and life satisfaction.

• 세라미스트
• /
• 제9권6호
• /
• pp.18-23
• /
• 2006

In this article, the present activities regarding research and development of continuous SiC fiber reinforced ceramic matrix composites (CFCC) in Japan are reviewed. The key technologies in SiC fiber composites are interphase between fiber and matrix and its oxidation resistance. To improve oxidation resistance of interphase, various kinds of technologies such as environment barrier coating, high dense matrix, unti-oxidation matrix, multi-layered intephase have been developed. It is suggested that high performance, affordable processing cost, and excellent reliability will be important factors to be in practical use of CMCs in future.

• 대한화학회지
• /
• 제29권6호
• /
• pp.656-663
• /
• 1985

연탄 연소시 발생하는 일산화탄소의 촉매전환에 의한 제독 실험을 실시하였다. 구형 ${\gamma}-Al_2O_3$ pellets, ceramic foam, honeycomb 등 세가지 다른 형태의 지지체에 0.2%의 백금을 담지시킨 후 촉매를 연탄연소 실험에 응용한 결과 첫회 사용시에는 일산화탄소의 제거효과가 모두 우수하였으나 반복 사용할 경우 사용횟수에 따라 촉매활성 전하 현상이 뚜렷하게 나타났다. 사용한 촉매양에 비하여 ceramic foam 촉매가 제독효과 및 내구성에서 가장 우수하였다. 촉매활성저하 원인은 아연 및 황화합물에 의한 촉매독이 뚜렷하였고 소결 등에 의한 백금 활성면적의 감소현상도 동시에 나타났다.

• 유통과학연구
• /
• 제20권6호
• /
• pp.87-97
• /
• 2022

Purpose: In the last few decades, the ceramic industry has become an important industry for Indonesia. The resulting product must be handled properly, because if material & product handling is not carried out properly it will impact on the quality of product. Based on the logistics outsourcing research gaps in the ceramics industry to logistics service provider (LSP), this study aims to analyze the logistics service improvement of LSP in accordance with the needs of the ceramic industry to minimize logistics outsourcing risks. Research design, data and methodology: In the field study, observations, interviews and surveys related to production and logistics activities in the ceramic industry & LSP were carried out. The next step is to analyze logistics service of LSP needed by the ceramic industry. Results: The final findings obtained from this research are the LSP need to improve 1) knowledge; 2) technology capability; 3) relationships; 4) service quality; 5) innovation; 6) commitment in services. Conclusion: In order to reduce logistics outsourcing risks in the ceramic industry, LSP in Indonesia need to improve the logistics services required by the ceramic industry with a focus on six areas of improvement.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.263-268
• /
• 2005

[ $20{\sim}40nm$ ] 크기의 Ag 콜로이드가 첨가된 세라믹 볼을 이용하여 음용수중의 중금속 흡착 및 항균성에 대한 특성을 평가하였다. 다공성이 우수한 세라믹 볼을 제조하기 위한 조건은 다음과 같다. 즉, 출발원료: 85wt%의 $Ca_{10}(PO_4)_6(OH)_2$, 바인더: 5wt%의 PVA 및 15wt%의 $\alpha-Ca_3(PO_4)_2$, 열처리온도: $1000^{\circ}C$, 반응시간: 3시간 이었다. 이와 같은 조건에서 얻어진 세라믹 볼은 비표면적이 $110m^2/g$ 이었으며, $120{\mu}m$의 기공크기와 80%의 기공율을 나타내었다. 그리고 AAS를 이용하여 음용수중의 중금속 흡착 제거율에 대한 성능시험을 행한 결과, Zn, Mn, Cu, Fe와 같은 중금속이 담지 1일 후 0.03mg/l 이하로 제거 되었으며, 침적시간 3시간 후에는 대장균이 모두 멸균되는 우수한 살균력을 나타내었다.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.261-266
• /
• 2018

Hollow or bumpy ZnO structures with micrometer-size features have been investigated as photocatalysts for water purification due to their high surface area available for reaction with harmful organic molecules and relatively large size for easy separation after finishing the photocatalytic reaction. In this study, selective synthesis of ZnO hollow or crumpled microspheres was performed using a simple and versatile ultrasonic spray pyrolysis process with various zinc precursors. The morphologies, phases, specific surface areas, and optical properties of the microspheres were characterized using X-ray diffraction, scanning electronic microscopy, nitrogen adsorption-desorption isotherms, and UV-vis spectroscopy. In addition, the mechanism underlying the formation of different morphologies and their photocatalytic activities were systematically investigated.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.477-482
• /
• 2017

Nitrogen-doped titanium dioxide (N-doped $TiO_2$) is attracting continuously increasing attention as a material for environmental photocatalysis. The N-atoms can occupy both interstitial and substitutional positions in the solid, with some evidence of a preference for interstitial sites. In this study, N-doped $TiO_2$ is prepared by the sol-gel method using $NH_4OH$ and $NH_4Cl$ as N ion doping agents, and the physical and photocatalytic properties with changes in the synthesis temperature and amount of agent are analyzed. The photocatalytic activities of the N-doped $TiO_2$ samples are evaluated based on the decomposition of methylene blue (MB) under visible-light irradiation. The addition of 5 wt% $NH_4Cl$ produces the best physical properties. As per the UV-vis analysis results, the N-doped $TiO_2$ exhibits a higher visible-light activity than the undoped $TiO_2$. The wavelength of the N-doped $TiO_2$ shifts to the visible-light region up to 412 nm. In addition, this sample shows MB removal of approximately 81%, with the whiteness increasing to +97 when the synthesis temperature is $600^{\circ}C$. The coloration and phase structure of the N-doped $TiO_2$ are characterized in detail using UV-vis, CIE Lab color parameter measurements, and powder X-ray diffraction (XRD).

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.179-187
• /
• 1980

Perovskite-type oxide catalysts in the $\textrm{LaMnO}_3$ family were prepared by both freeze drying and precipitation technique, and their catalytic activities with respect to the oxidation of CO with $O_2$ were measured in the composite gases. Freeze drying is a new technique for the prevention of migration of the solutes during drying. Therefore, the corrugated cordierite monolith fabricated with the Ø 1mm stainless steel bar was directly impregnated with nitrate solutions containing the appropriate cations, freeze dried and calcined. Precipitation was done by using $\textrm{(NH_4)}_2\textrm{CO}_3$ but the precipitated catalysts gave lower catalytic than the freeze dried samples due to, in part, relatively high calcining temperature. In this study, freeze dried composition had high catalytic activity, and their apparent activation energy for oxidation of CO was calculated by the rate plots using the data where the percent conversion of CO was less than 20%.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.267-272
• /
• 2000

Dual-actions are the most recently used delivery system in drug study. Dual-action agents are unique chemical entities comprised of two different type of antibacterial compounds covalently linked together in a single molecule in such a way that both components are able to exert their bactericidal properties. Crosslinked sulfadiazine-sulfanilamide such as antibiotics is synthesized by synthetic handle with glutaraldehyde. As a result, New synthetic antibacterial agent exhibited the broad antibacterial activities against gram(+) and gram(-) of 4 strains and a long durability supposing that the stomach and blood.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1310-1314
• /
• 1998

The oligo(methylsilene) (1) was treated with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalysts and with the group 6 metal carbonyl M(CO)6 (M = Cr, W) catalysts, producing the modified, cross-linked polymers. The average molecular weights and percent ceramic residue yields of modified polymers increase as the catalyst goes down from Ti to Hf and similarly as the catalyst goes down from Cr to W. An interrelationship between average molecular weights and percent ceramic residue yield is found within the respective group of catalysts, but is not observed as the catalyst goes down from Ti to W. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weights and similar percent ceramic residue yields as compared to the polymers modified with the group 6 metal carbonyl catalysts. The catalytic activities of group 4 metallocene combinations appear to be higher -100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls.