• Korea-Australia Rheology Journal
• /
• v.16 no.4
• /
• pp.227-233
• /
• 2004

Simplified model of slide-fed curtain coating flow has been developed and tested in this study. It rests on the sheet profile equations for curtain thickness in curtain flow and its trajectory derived by the integral momentum balance approach of Higgins and Scriven (1979) and Kistler (1983). It also draws on the film profile equation of film thickness variation in flow down a slide. The equations have been solved in finite difference approximation by Newton iteration with continuation. The results show that how inertia (Rey­nolds number), surface tension (capillary number), inclination angle of the slide, and air pressure difference across the curtain affect sheet trajectory and thickness profile. It has been revealed that approximate models can be useful to easily analyze coating flow dynamics without complex computations, giving qualitative agreement with full theory and with experiment.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.29-40
• /
• 1993

Several vermiculite deposits occur as the alteration product from phlogopite in ultramafic rock, in the Hongseong and Cheongyang area, South Korea. Some quarries show well-defined weathering profile. Samples collected from those quarries were examined by XRD and chemistry to define a vertical variations in mineralogy and chemistry of the weathering profile developed on ultramafic rocks. The analysis by X-ray diffractometry showed that mineral compositions changed continuously as depth of profile increasing, the vermiculite-the phlogopite/vermiculite interstratified-the phlogopite. Chemical analysis of bulk samples in altered zone revealed that regardless of composition and kinds of mineral in the rock, there are significant increase of MgO, CaO and $H_2O$, and decrease of K as depth of profile decrease reflecting the characteristics in vermiculitization. Also, there was a tendency that weathering indicies of each sample horizon change gradually with increasing depth. This tendency can be explained as variations of degree of vermiculitization. The regular changes of mineralogical and chemical composition in vertical profile suggest that weathering is the most important process in vermiculitization in this area.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.236-240
• /
• 2003

Fabrication of a graded index profile was possible via photochemical reaction of cinnamoyl groups with 350 nm wavelength UV light to form crosslinked structures. Such structural change may induce the change in the refractive index. In order to generate graded index profile in the PMMA polymer optical fiber (POF) with cinnamoyl groups by photochemistry, a methyl methacrylate monomer containing a cinnamoyl functional group in the side chain were prepared. This monomer was then copolymerized with methyl methacrylate with various compositions not only to utilize advantages of poly(methyl methacrylate) but also to overcome the drawbacks of the cinnamate homopolymer. Changes of refractive indices were investigated with various contents of cinnamoyl group and varying irradiation time. Large change in the refractive index (${\Delta}{\approx}0.01$) and its proper profile shape ($g{\approx}2.2$) can be obtained by changing irradiation time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.1
• /
• pp.79-88
• /
• 1997

An analysis of unsteady heat and mass transfer in the Modified Chemical Vapor Deposition has been carried out including the effects of chemical reaction and variable properties. It was found that commonly used quasi-steady state assumption could be used to predict overall efficiency of deposition, however, the assumption would not provide detailed deposition profile. The present unsteady calculations of wall temperature profile and deposition profile have been compared with the existing experimental data and were in good agreement. The effects of variable torch speed were studied. Linearly varying torch speed case until time=120s resulted in much shorter tapered entry than the constant torch speed case.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.433-436
• /
• 2002

Retardation liquid crystal films with a profiled titled optic axis (splay films) of both nematic and discotic types are used as compensation films for twisted nematic displays (TN-LCD). A new method is developed to characterize retardation vs. inclination (retardation profile) of splay films by three parameters: "full retardation" $d^{\ast}{\triangle}n$, "inplane retardation" $R_0$ and "retardation difference" $R_d$ . Splay films with the same retardation profile but with different tilt profile (retardation invariants) are discovered. Splay films with different structure parameters but belong to the same retardation invariant have the same compensation opportunities for TN-LCD.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.588-593
• /
• 2012

Compatibility of unsaturated polyester (UP) and low profile agent (LPA) of polystyrene (PS) have been investigated under various mixing conditions such as the ratio of UP and LPA, mixing time, mixing temperature, and input amount of 2nd UP. It was possible to obtain mixture with small particle size and low phase separation in condition of 35 g of LPA, 25 g of 1st UP input, 5 min of mixing time, 1700 rpm of mixing speed, and 45 g of 2nd UP input. It was found that compatibility of UP and LPA was very sensitive to mixing conditions. In addition, molded sample using sheet molding compound prepared by stable mixing condition appeared good properties such as low water adsorption, low shrinkage, and high gloss.

• Korean Journal of Materials Research
• /
• v.31 no.3
• /
• pp.162-171
• /
• 2021

Dry etching of copper thin films is performed using high density plasma of ethylenediamine (EDA)/hexafluoroisopropanol (HFIP)/Ar gas mixture. The etch rates, etch selectivities and etch profiles of the copper thin films are improved by adding HFIP to EDA/Ar gas. As the EDA/HFIP concentration in EDA/HFIP/Ar increases, the etch rate of copper thin films decreases, whereas the etch profile is improved. In the EDA/HFIP/Ar gas mixture, the optimal ratio of EDA to HFIP is investigated. In addition, the etch parameters including ICP source power, dc-bias voltage, process pressure are varied to examine the etch characteristics. Optical emission spectroscopy results show that among all species, [CH], [CN] and [H] are the main species in the EDA/HFIP/Ar plasma. The X-ray photoelectron spectroscopy results indicate the formation of CuCN compound and C-N-H-containing polymers during the etching process, leading to a good etch profile. Finally, anisotropic etch profiles of the copper thin films patterned with 150 nm scale are obtained in EDA/HFIP/Ar gas mixture.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.108-113
• /
• 2016

A miniaturized lab-scale Cu plating cell for the metallization of electronic devices was fabricated and its deposit uniformity and profile were investigated. The plating cell was composed of a polypropylene bath, an electrolyte ejection nozzle which is connected to a circulation pump. In deposit uniformity evaluation, thicker deposit was found on the bottom and sides of substrate, indicating the spatial variation of deposit thickness was governed by the tertiary current distribution which is related to $Cu^{2+}$ transport. The surface morphology of Cu deposit inside photo-resist pattern was controlled by organic additives in the electrolyte as it led to the flatter top surface compared to convex surface which was observed in the deposit grown without organic additives.

• Natural Product Sciences
• /
• v.26 no.4
• /
• pp.268-278
• /
• 2020

In this study, we investigated the chemical profile and effects of RW0117 (Artemisia argyi 65 .5 % ethanol extract) on gastric lesions in rats. We optimized and validated a method to obtain the chemical profile of RW0117. We then investigated the antioxidant and anti-inflammatory effects in vitro, and the protective effects on gastric lesions in vivo. The IC50 of 2,2-diphenyl-1-picrylhydrazyl free radical scavenging considering the antioxidant effects of RW0117 was 166.55 ㎍/mL, and the IC50 of nitric oxide scavenging considering the anti-inflammatory effects was 41.16 ㎍/mL. Oral administration of RW0117 at lower concentrations (25, 50, 100 mg/kg) had similar or greater effects than the daily intake conversion concentration (115mg/kg) of a health functional food (Avexol®) in the acetic acid-induced ulcer and the ethanol-induced gastric injury rat models. In addition, oral administration of RW0117 increased the expression of prostaglandin E2, which enhances the protective effect in the gastric mucosa in the ethanol-induced gastric injury rat model. These results suggest that RW0117 may have potential therapeutic uses in the protection of the gastric mucosa.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.549-553
• /
• 1998

The structure and layer distribution of cadmium arachidate Langmuir-Blodgett film were analyzed by the small angle X-ray reflectivity measurements using synchrotron radiation. Y-to X type transition was ocurred during the 39th passage of deposition of cadmium arachidate. Based on the measurement of the consumed area of the monolayer, it was determined that about 27.5 layer was deposited. Using the synchrotron X-ray, the reflectivity profile of cadmium arachidate LB film over the wide range of grazing angle was obtained. The X-ray reflectivity profile was analyzed using the recursion formula. By fitting the location and dispersion of the subsidiary maxima between the Bragg peaks of the measured reflectivity profile with that of the calculated reflectivity profile, the average thickness and the distribution of layer thickness were evaluated. The genetic algorithm was adopted to the fitting of reflectivity profile to evaluate the optimum value of the number distribution of layer. Based on the morphology measurement with an atomic force microscopy (AFM), the domain structure and mean roughness of LB films were obtained. The mean roughness value calculated based on the number of layer distribution obtained from the measurement by AFM is consistent with that obtained from X-ray reflectivity analysis.