• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1487-1494
• /
• 2010

Structured lipid (SL) for cocoa butter alternative was synthesized by interesterification of coconut oil fraction and palm stearin (6:4 and 8:2, by weight) in a shaking water bath at $60^{\circ}C$ and 180 rpm. It was performed for various reaction times (1, 2, 3, and 6 hr). The reaction was catalyzed by sn-1,3 specific Lipozyme TLIM (immobilized lipase from Thermomyces lanuginosus). SL-solid part was obtained from acetone fractionation at $0^{\circ}C$. SL-solid part was blended with other palm oils and fractions for desirable property of cocoa butter alternative (SL-solid part : palm middle fraction : palm stearin solid : palm oil, 70.4:18.4:2.9:8.3, by weight). In reversed-phase HPLC analysis, triacylglycerol species of cocoa butter alternative had partition number of 40 (10.77%), 42 (13.06%), 44~46 (17.38%) and 48 (51.88%). Major fatty acids of cocoa butter alternative were lauric acid (16.5%), myristic acid (12.28%), palmitic acid (46.03%), and linoleic acid (14.75%). Solid fat content (SFC) and polymorphic form (${\beta}'$ form) of cocoa butter alternative prepared were similar to those of commercial cocoa butter replacer (CBR).

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.75-79
• /
• 1989

The rheological properties of sugar and cocoa particle suspensions in cocoa butter under molten condition were analyzed with Haake rotationary viscometer. Both suspensions had yield value and showed rheopexy at low shear rate and thixotropy at high shear rate. Flow behaviors of the suspensions were analyzed with modified Casson model. Casson viscosity and yield value increased with increasing the concentration of sugar and cocoa particles. There was an obvious dependence of the Casson viscosity and yield value on the particle size distributions that was represented by the Sauter mean diameter of the particles. Casson viscosity and yield value of cocoa butter-sugar suspension increased with increasing the fineness of sugar particle crystal. With increasing the fineness of cocoa particle a decreasing Casson viscosity of cocoa butter-cocoa particle suspension was achieved, but the yield value did not change significantly with cocoa particle size. Therefore, it was predicted that the best rheological properties of chocolate could be obtained with the combination of coarse ground sugar $(d=36.30{\mu}m)$ and fine ground cocoa particle $(d=14.81{\mu}m)$ within the studied range.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.482-491
• /
• 1997

The effect of addition of fractionated milk fats on the composition and melting behavior of cocoa butter was investigated. High melting fraction (HMF) of milk fat fractions had the highest contents of long chain fatty acid $(C16{\sim}C18)$ and saturated fatty acid followed by medium melting fraction 1 (MMF1), medium melting fraction 2 (MMF2), anhydrous milk fat (AMF), and low melting fraction (LMF) in a decreasing order. MMF2 had the highest contents of the short chain fatty acid $(C4{\sim}C10)$ and medium chain fatty acid $(C12{\sim}C14)$ followed by AMF, HMF, MMF1, and LMF in a decreasing order. When the fractionated milk fats were added to cocoa butter, the long chain fatty acid contents increased with increasing the ratio of fractionated milk fats. The saturated fatty acid contents decreased only when the LMF was added. The higher content of long chain triglyceride and the lower contents of short chain triglyceride and medium chain triglyceride were obtained from the fractionated milk fat of higher melting point. When the fractionated milk fats were added to cocoa butter, long chain triglyceride contents decreased with increasing the ratio of the fractionated milk fats. The melting points of cocoa butter, AMF, HMF, MMF1, MMF2, LMF were $33.3^{\circ}C,\;31.2^{\circ}C,\;40.6^{\circ}C,\;37.4^{\circ}C,\;33.5^{\circ}C$, and $6.5^{\circ}C$, respectively. Cocoa butter had the highest content of solid fat followed by HMF, MMF1, MMF2, AMF, and LMF in a decreasing order. When the fractionated milk fat was added to cocoa butter at various temperatures, the solid fat content in the mixture of fractionated milk fat and cocoa butter decreased with increasing the ratio of fractionated milk fat. This results suggested that anhydrous milk fat and fractionated milk fats had a good compatibility with cocoa butter.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1430-1437
• /
• 2011

Synthesis conditions of cocoa butter equivalents were optimized using the response surface method (RSM) by interesterification of canola oil (Ca), palmitic ethyl ester (PEE), and stearic ethyl ester (StEE). The reaction was catalyzed by immobilized lipase (Lipozyme TLIM) from Thermomyces lanuginosa to produce structured lipids containing a composition of triacylglycerols similar to cocoa butter. Reaction conditions were optimized using D-optimal design with the three reaction factors of the substrate molar ratio of canola oil to palmitic ethyl ester and stearic ethyl ester (Ca : PEE : StEE=1:1:3, 1:1.66:5, 1:2:6, 1:2.33:7, 1:3:9, $X_1$), enzyme ratio (2~6%, $X_2$), and reaction time (30~270 min, $X_3$). The optimal conditions that minimized acyl-migration while maximizing 1-palmitoyl-2-oleoyl-3-stearoyl glycerol (POS), 1,3-distearoyl-2-oleoyl glycerol (SOS), and 1,3-dipalmitoyl-2-oleoyl glycerol (POP) were predicted, resulting in Ca : PEE : StEE=1:3:9, 6% of enzyme ratio, and 40 min of reaction time. The reaction product of structured lipids was synthesized again under the same conditions, showing 10.43 area% of acyl-migration, 25.31 area% of POS/PSO, 19.79 area% of SOS, and 11.22 area% of POP.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.111-116
• /
• 1992

Production of cocoa butter equivalent fat (CBE) from palm oil and stearic acid by reverse micelle lipase reaction system was studied. Qualitative and quantitative analyses of triglycerides were performed by HPLC. The reaction conditions for maximum conversion from triolein and stearic acid to 1-stearoyl-2,3-dioleoyl glycerol(SOO) and 1,3-distearoyl-2-oleoyl glycerol(SOS) were as follows: a molar ratio of water/Aerosol OT, 10; triolein, 30 mM; stearic acid, 90 mM; pH, 7.5; and temperature, $50^{\circ}C$. By lipase in reverse micellar system containing palm oil and stearic acid, 1,3-dipalmitoyl-2-oleoyl glycerol(POP), 1-palmitoyl-2,3-dioleoyl glycerol(POO) and SOO decreased, but large amounts of 1-palmitoyl-2-oleoyl-3-stearoyl glycerol(POS) and SOS was formed.

• Food Science and Industry
• /
• v.43 no.4
• /
• pp.36-43
• /
• 2010

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.64-79
• /
• 2024

The rise in popularity of vegetarian and plant-based diets has led to extensive research into plant-based whipped creams. Whipped cream is an oil-in-water emulsion that creates foam through whipping, stabilizing the foam with proteins and fats. Pea protein is an excellent emulsifier and foaming agent among plant-based proteins, but its application in whipped cream is currently limited. The objective of this study was to investigate the quality characteristics of plant-based whipped cream made with ultrasonicated pea protein. The whipped creams were evaluated based on their quality characteristics. A commercially available dairy whipped cream (CON) was used as a control. Plant-based creams were evaluated using pea protein solution, cocoa butter, and canola oil to produce un-ultrasonicated pea protein whipped cream (PP) and ultrasonicated pea protein whipped cream (UPP) at 360 W for 6 min. UPP significantly reduced whipping time and foam drainage compared with CON and PP, resulting in significantly increased overrun, fat destabilization, and hardness. Optical microscopy showed that UPP had smaller fat globules and bubble size than PP. The fat globules of UPP and CON were mostly below 5 ㎛, whereas those of PP were distributed at 5-20 ㎛. Finally, ultrasonication significantly improved the overrun, foam drainage, fat destabilization, and hardness of UPP, which are significant quality characteristics of whipped creams. Therefore, ultrasonicated plant-based pea protein whipped cream is believed to be a viable alternative to dairy whipped cream.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1438-1446
• /
• 2011

Palmitoyl-oleoyl-oleoyl (POO) and palmitoyl-oleoyl-palmitoyl triacylglycerol rich fraction (PSL) was obtained from the acetone fractionation of palm stearin. The fatty acid composition (total and positional), tri-acylglycerol species, and solid fat index (SFI) were compared among the blends of natural vegetable fats (sal fat, illipe fat, kokum fat, shea stearin fat, and shea butter) and PSL with different ratios (50:50, 60:40, 65:35, 70:30). In total fatty acid composition of PSL, palmitic, oleic, and linoleic acids were the major fatty acids, whereas in natural vegetable fats stearic and palmitic acids were the major fatty acids. Moreover, oleic acid was a major fatty acid at sn-2 position in sal fat, illipe fat, and kokum fat. The TAG species was analyzed by reversed-phase HPLC, from which the PN value ranged from 46 to 54. When natural vegetable fats and PSL were blended with different ratios, decreasing the amount of PSL resulted in increasing SFI in most cases. Among blends, the SFI of sal fat and PSL were most similar to commercial cocoa butter equivalent (CBE).

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.4
• /
• pp.293-298
• /
• 2017

In this study, we developed a 3D chocolate printer and studied the conditions needed for chocolate printing. Because chocolate is a mixture of cocoa mass, cocoa butter and sugar particles, its properties vary with temperature, and care is required in melting and extrusion. A chocolate supply unit is composed of a heating block and a syringe pump. It is integrated with a 3-axis linear robot. In order to be more accurate than the existing 3D chocolate printer is, the system was configured so that the printing line width became $430{\mu}m$. Printing performance was studied according to various parameters. The condition needed for printing lines with a stable width was discovered by the experimental design method and has been confirmed by a 2D line test. These 3D printing experiments showed that it was possible to build a 3D shape with an inclination angle of up to $45^{\circ}$ without support. Further, chocolate printing of a 3D shape has been successfully verified with the developed system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.93-101
• /
• 2014

Asymmetric 1,2-distearoyl-3-oleoyl-rac-glycerol (SSO) triacylglycerol (TAG) is used as a cocoa butter replacer (CBR). In this study, it was produced by lipase-catalyzed interesterification of fully hydrogenated soybean oil (FHSBO) and oleic ethyl ester (OEE) in a batch type reactor at $75^{\circ}C$, 250 rpm. Different molar ratios (FHSBO : OEE=1:1, 1:2 and 1:3, w/w) and various reaction times (1, 2, 3, 4, and 5 hr) were also tested. The optimized condition for SSO was a FHSBO : OEE molar ratio of =1:1 at reaction times of 2, 3, 4, and 5 hr. Enzymatic synthesis generated SSO/SOS, as well as the other TAGs (e.g., PSO/POS, SOO/OSO, SSS), ethyl esters, monoacylglycerol (MAG), and diacylglycerol (DAG). After scale-up, fractionation by solvent (methanol and acetone) fractionation and column chromatography was applied. To reduce ethyl esters, high-melting TAGs (e.g., SSS), and SOO/OSO in reactants, solvent fractionation was applied. Using a silica gel column (sample : silica gel=2:1, wt%), MAG and DAG were removed at $25^{\circ}C$. The major fatty acid composition of the final products (with a high SSO/SOS content) was palmitic acid (C16:0, 10.9~12.9 area%), stearic acid (C18:0, 52.2~54.9 area%), and oleic acid (C18:1, 34.2~35.5 area%). In reversed-phase HPLC analysis, the major TAG species of the final product (FHSBO : OEE=1:1, 2 hr) were SSO/SOS (82.31 area%) and PSO/POS (14.51 area%). Based on the $[SS]^+$ : $[SO]^+$ ratio obtained by RP-HPLC/APCI-MS, the final product had a higher SSO (AAB type TAG) content than cocoa butter (CB). The solid fat index (SFI) of CB and the final product obtained were similar with a narrow melting point range around ~32 to $35^{\circ}C$.