• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.96-102
• /
• 2015

Composite materials are widely used as structural materials for manufacturing an aircraft, due to their : low weight, low thermal expansion coefficient, production efficiency, anisotropy, corrosion resistance and long fatigue life. The range of using composite materials has been extended from the fuselage and the wings to the entire aircraft structure. In this paper, by analyzing the problems which were generated while designing and fabricating aircraft structures using composite materials, the differences between metallic structures and composite structures are described. In addition, the methodological improvement directions on design and fabricating are described.

• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.54-59
• /
• 2010

After the advent of B787(Boeing Co.), a civil aircraft using composite materials more than 50% of it total structural weight for weight savings，best performances and efficiencies, various endeavors to develop and apply the state of art of structural health monitoring(SHM) technologies for composite aircraft have been made for many years. Despite their plentiful advantages composite aircraft structures are susceptible to the hidden or barely visible impact damages(BVID) and excessive loads that if unchecked may lead to lower structural integrity, loss of operational performance and finally a sudden catastrophic failure of the aircraft structure. In this paper background of SHM technology and relevant technologies for application of SHM technology to the composite aircraft in the near future and requirements for certification of SHM system are shortly presented.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.167-172
• /
• 2002

During the operation of military aircraft, maintenance is divided into organizational, intermediate and depot maintenance. In the depot maintenance, after removal of major parts and removable doors, damage assessment is performed. Locating damage, charactering the damage and determining its extent, zoning the damage on the part being repaired and re-evaluation of the damaged area after damage removal. Repair joints are classified by bonded joints and bolted joints, depending on joining material. In this paper, repair method in aging aircraft is investigated and the possibility of application of copmposite patch is surveyed.

• 항공우주시스템공학회지
• /
• 제5권1호
• /
• pp.17-23
• /
• 2011

Since the time, cost and lack of regulatory information and guidance, one of the largest regulatory obstacles for an airframe manufacturer of polymer based advanced composite materials in certified aircraft applications, is to generate design allowables that will satisfy Airworthiness Regulations. In the past two decades, the design allowables used in military aircraft had been generated and applied in Korea, however the qualification of composite materials used in certifying airframe structure was not accomplished for design and demonstration of compliance to applicable airworthiness regulation. It is the intend of this paper that provide the basis of composite material qualification for small aircraft certification to the airworthiness regulation.

• 항공우주시스템공학회지
• /
• 제11권4호
• /
• pp.1-7
• /
• 2017

복합재 무인기의 설계 허용치를 개발은 산업계에 가장 중요한 관심사이다. 전통적인 유인항공기 구조물의 인증방법을 시제기나 기술 시현기에 적용하는 것은 과도하게 긴 개발 시간과 비용을 발생시킨다. 본 논문에서는 경량 복합재 무인기의 구조중량의 줄이기 위한 설계 허용치 설정 방법을 제안하였다. 본 논문에서는 B-basis 복합재 재료물성의 설계허용치 적용 가능성을 검토하였다. 또한 여러 가지 민항기와 무인기의 목표 파손확률을 검토하여 제시하였다. 결과로부터, 경량 복합재료 무인기의 설계 허용치 요구조건은 유인 복합재료 항공기에 비하여 완화되어야 하는 것을 알 수 있다.

• 한국항공운항학회지
• /
• 제25권4호
• /
• pp.130-140
• /
• 2017

Lightning protective design of an aircraft fuel system is closely related to the safety of the flight. Recently, composite material in building an aircraft becomes more important because it can reduce the weight of the aircraft. The composite materials decrease the protection against the effect of lightning. Lightning protective design of metal material aircraft has been researched for a long time and the design technique has been announced widely. However, research on the lightning protective design using composite material aircraft is very limited. In this study, lightning protective design for fuel tank structural component, access cover, fuel filler cap and drain valve in carbon fiber composite material aircraft have been presented. To show the compliance with FAA airworthiness standard regarding the presented protection designs, three steps, including lightning strike analysis, lightning environment analysis and certification test, were conducted in accordance with FAA AC 20-53.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.231-234
• /
• 2005

The present study provides the legislative backgrounds and contents of the America's General Aviation Revitalization Act of 1994 as well as the general impacts of the Advanced General Aviation Transport Experiments Program on the composite materials and associated general aviation aircraft structures

• Composites Research
• /
• 제25권4호
• /
• pp.105-109
• /
• 2012

최근 국내에서 미국과 상호항공안전협정 체결을 위한 소형 항공기가 연구 개발 중이다. 연구 대상 항공기는 경량화 하여 연료 절감을 위해 전기체 복합재료가 적용되었다. 그러나 복합재 구조는 외부의 충격 손상에 취약한 구조이다. 따라서 항공기 구조물은 충격 손상에 대한 압축 파손 강도를 고려하여 손상 허용 설계가 반드시 수행되어야 한다. 이는 복합재 구조 항공기 인증에 매우 중요한 요소이다. 본 연구에서는 항공기 복합재 구조에 적용된 두꺼운 적층판에 대한 손상 허용 연구를 수행하였다. 두꺼운 적층판의 세 가지 형태인 손상이 없는 시편, 구멍 손상 및 충격 손상이 적용된 시편의 압축 하중 하에서 손상 허용 기준이 평가되었다.

• International Journal of Aerospace System Engineering
• /
• 제10권1호
• /
• pp.14-24
• /
• 2023

The materials applied to the aircraft fuselage, parts, and components must be verified by relative authorities in accordance with the procedures set by the airworthiness authority to achieve the aircraft type certification. There are no examples of domestic composite materials which were verified in order to be applied to aircraft structure. In this study, the composite material certification system of NCAMP, an American composite material standard certification organization, was reviewed and used as the fundamentals of the first aerospace composite material certification system in ROK(Fig 2,8). Also updated material certification documents were developed and confirmed by material certification engineers and inspectors. This aerospace composite material qualification system is intended to modernize the material certification system for AAM(Advanced Air Mobility) as well as aircraft and to enhance the understanding of related technicians and inspectors.

• 항공우주시스템공학회지
• /
• 제3권2호
• /
• pp.1-11
• /
• 2009

A structural modelling for study on dynamic characteristics of tapered composite aircraft wings in the form of thin-walled beam is presented. The proposed structural model includes effects of transverse shear flexibility exhibited by the advanced composite materials and warping restraint characterizing elastic anisotropy and induced structural couplings. The complex effects of these factors could have a role in more efficient analysis on those structural models.