• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1946-1954
• /
• 2008

In urban railways operated by 10 cars or 8 cars per trainset, passengers split up and board a train. On-board passengers for each car are not aware of congestion level of other cars of the train. Passengers waiting at stations can not predict congestion rate of the car which they get on. Therefore, the number of passengers is not equally distributed. The cars with a relatively low congestion level and the ones with a high level coexist in the train. The objective of this paper is to enhance passenger convenience and improve train operational efficiency through operational headway adjustments according to congestion level of each car. It also aims to spread passengers out evenly and assess the degree of congestion on each car by measuring the weight of each car including passengers during peak and off-peak hours.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.452-456
• /
• 2010

In wireless sensor networks, due to the many-to-one convergence of upstream traffic, congestion more probably appears. Network congestion can be alleviated by controlling incoming traffic, but using traffic control can violate fidelity level required by applications. In this paper, we propose multipath-based congestion control scheme alleviating congestion by resource control for wireless sensor networks. When congestion occurs, the multipath-based congestion control scheme distributes network traffic through multiple alternate paths, and consequently, the scheme enables to detour in the congested spot and increase resource utilization. Our results show that our multipath-based congestion control scheme can satisfy fidelity level required by applications and alleviate congestion effectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.923-929
• /
• 2021

TCP communication and packet communication require transmission control technology to ensure high quality and high reliability. However, in the case of real-time data transmission, an inefficient transmission problem occurs. In order to overcome this problem and transmit the packet reliability, in general, early congestion control using the buffer level as an index was used. Control of the congestion control point and the cancellation point is delayed because the point at which congestion is controlled is based on the buffer level. Therefore, in this paper, not only the buffer level indicator, but also the ideal buffer level, which determines the packet discard probability, is classified so that the transmission rate and buffer level that measure network congestion are close to the level above the optimal setting. As a result, it was shown that the average buffer level can be directly controlled by maintaining the average buffer level by the ideal buffer level set in the experiment to prove the proposed method.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.127-134
• /
• 2014

PURPOSES : To operate more efficient traffic management system, it is utmost important to detect the change in congestion level on a freeway segment rapidly and reliably. This study aims to develop classification method of congestion change type. METHODS: This research proposes two classification methods to capture the change of the congestion level on freeway segments using the dedicated short range communication (DSRC) data and the vehicle detection system (VDS) data. For developing the classification methods, the decision tree models were employed in which the independent variable is the change in congestion level and the covariates are the DSRC and VDS data collected from the freeway segments in Korea. RESULTS : The comparison results show that the decision tree model with DSRC data are better than the decision tree model with VDS data. Specifically, the decision tree model using DSRC data with better fits show approximately 95% accuracies. CONCLUSIONS : It is expected that the congestion change type classified using the decision tree models could play an important role in future freeway traffic management strategy.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.115-122
• /
• 2017

In vehicular safety service, every vehicle broadcasts Basic Safety Message (BSM) periodically to inform neighbor vehicles of host vehicle information. However, this can cause network congestion in a region that is crowded with vehicles resulting in a reduction in the message delivery ratio and an increase in the end-to-end delay. Therefore, it could destabilize the vehicular safety service system. In this paper, in order to improve the congestion control and to consider the hidden node problem, we propose a congestion control scheme using entire network congestion level estimation combined with transmission power control, data rate control and time slot based transmission control algorithm. The performance of this scheme is evaluated using a Qualnet network simulator. The simulation result shows that our scheme mitigates network congestion in heavy traffic cases and enhances network capacity in light traffic cases, so that packet error rate is perfectly within 10% and entire network load level is maintained within 60~70%. Thus, it can be concluded that the proposed congestion control scheme has quite good performance.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.83-86
• /
• 2002

In this paper while a router is routing all packet to the next hop, it inspects whether there is congestion on this current hop router or not and if the router discovers that it has some congestion, it informs that the packet is experienced to congestion. The packet arrived to next hop including some information about the congestion is processed first and it has wider bandwidth than another packet The amount of congestion is recorded to the DS field of IP header by congestion experience level. In the next hop when the packet including the congestion information is routed, the standard packet dropping ratio of the current router is changed in proportion to congestion experience that is recorded in IP header on of that. When the packet that has experienced congestion before is arrived, the router extends the drop threshold value not to drop the packet. It mean that transferring the audio or video stream, if the packet is already experienced the congestion in another hop, the router can provide the better service quality about 15∼25% than another.

• Journal of Korea Multimedia Society
• /
• v.23 no.10
• /
• pp.1270-1285
• /
• 2020

As a representative concept of the fourth industrial revolution era where everything is digitized, digital twin means analyzing and optimizing a complex system using a simulation model synchronized with the system. In this paper, we propose a digital twin simulation model for the efficient operation of urban railways in Busan. Due to the geopolitical nature of Busan, where there are many mountains and narrow roads, the railways are more useful than other public transportation. However, this inversely results in a high level of congestion, which is an inconvenience to citizens and may be fatal to the spread of the virus, such as COVID19. Considering these characteristics, the proposed model analyzes the congestion level of the railways in Busan. The model is developed based on a mathematical formalism called discrete-event system specification and deduces the congestion level and the average waiting time of passengers depending on the train schedule. In addition, a new schedule to reduce the congestion level is derived through particle swarm optimization, which helps the efficient operation of the railways. Although the model is developed for the railways in Busan, it can also be used for railways in other cities where a high level of congestion is a problem.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.417-424
• /
• 2003

In this paper, we introduce and analyze a feedback control model of TCP/AQM dynamics. Then, we propose the Pro-active Queue Management (PAQM) mechanism, which can provide proactive congestion avoidance and control using an adaptive congestion indicator and a control function for wide range of traffic environments. The PAQM stabilizes the queue length around a desired level while giving smooth and low packet loss rates independent of the traffic load level under a wide range of traffic environment. The PAQM outperforms other AQM algorithms such as Random Early Detection (RED) [1] and PI-controller [2]

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.675-685
• /
• 2014

This paper develops a differentiated pricing strategy over each segment of expressways based on the second-best pricing method for reducing congestion. To this end, a bi-level problem is proposed, in which the upper level of the model is formulated to determine toll level of each segment for minimizing traffic congestion, whereas the lower level of the model is formulated as a variable demand assignment problem. The sensitivity analysis based algorithm is took placed to find optimal solutions of upper level model. An application of the proposed model uses the modified Sioux-Falls network. The results show that the segment-based differentiated pricing strategy performs better than the existing uniform pricing strategy in reducing traffic congestion. This study can be applied as a demand management method to relieve disutility of excessively congested segments of expressways.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.49-58
• /
• 2006

The purpose of this study is to develop transportation-sensitive land use densities in a metropolitan context. It analyses traffic impacts according to 20 different development density scenarios in the downtown Seoul, and estimates the density ceiling. The results identify that the transportation-wise sustainable density in the downtown can be extended up to the FAR level of 460% with an option of 2,000 won congestion charge levied on the downtown area. It also finds that the region-wide sustainability measured by congestion level can be improving as the level of congestion charge increases. Without the congestion charge, however, the density ceiling slides down to 430%. It is recommended that, in order to bring in higher density developments in the region, transportation demand management (TDM) measures are indispensible.