• 한국안전학회지
• /
• 제19권4호
• /
• pp.94-100
• /
• 2004

This study delivers the actual condition of investment for industrial accident prevention based on survey of 500 construction sites from 'reports for industry safety and health' published by Korea Occupational Safety & Health Agency (KOSHA). The various research techniques were used such as technical statistic analysis for construction industry, cost comparison of industrial accident prevention and accident loss. A formula was deduced to calculate accident loss and accident frequency by accident prevention cost through regression analysis.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.161-165
• /
• 2004

철근콘크리트조 공사의 안전성과 효율성은 동바리-슬래브거푸집의 최적의 운영에 달려있다. 철근콘크리트공사에서의 사고는 주로 가설공사에 과도한 하중이 작용하였거나 동바리를 조기에 철거하기 때문에 발생한다. 콘크리트의 조기압축강도발현이 공사중구조체의 안전에 중요하다. 슬래브-동바리의 상호작용에 관한 연구는 주로 무량슬래브 구조에 대하여 이루어 졌다. 본 연구에서는 전단벽식 철근콘크리트조 아파트에서 슬래브와 동바리에서의 하중분포를 유한요소법을 이용하여 조사하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.195-196
• /
• 2017

The number of human accidents in the construction industry is increasing every year, and it constitute the highest percentage among industry. This means that activities performed to prevent safety accidents in the country are not efficient to reduce the rate of accidents in the construction industry. In order to solve this issue, research has been conducted from various perspectives. But, research regarding to quantification model of human accidents is insufficient. the objective of this study is to conduct a basic study on quantification model development of human accidents. To achieve the objective, first, Cause of accident is defined the through literature review. Second, a basic statistic analysis is conducted to determine the characteristics of the accident causes. Third, the analysis is conducted after dividing into four categories : accumulate rate, season, total construction cost, and location. In the future, this study can be used as a reference for developing the safety management checklist for safety management in construction site and development of prediction models of human accident.

• 터널과지하공간
• /
• 제4권2호
• /
• pp.119-131
• /
• 1994

This is a Double-Track Railway tunnel in typical Tae-Gu black and gray shale forming part of the No.1 Line of the Tae-Gu Subway. The main fault zone at tunnel is a moderately to highly weathered and closely jointed zone, 0.5 m wide with associated paralled jointing which is slickensided and fractured. After excavation by blasting, the soft rocks should need to be reinforced with optimal supporting pattern which might be better redesigned through the consideration of the results of in-situ rock measurements at the field. Performances fo the field tests included Point Load Test, Schmidt Hammer Test, and field joint measurement gave the detail data for the optimum support design and safe excavation of the No.1 Line of Tae-Gu Subway at the No.1-7 consturction site adn the safety of this redesigned supports system was analysed by the FDM program FLAC.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.125-129
• /
• 2004

수화열에 의한 균열은 대규모 콘크리트 타설시 흔하게 접하는 문제이며 이에 대한 해결은 시공이음을 만드는 것이다. 일반적인 방법으로 접합면을 할석으로 처리 하나 이 작업은 번거롭고 품질의 일관성을 유지하기 쉽지 않다. 본 연구에서는 접합면을 3가지 방법으로 처리하여 접합면의 전단강도를 비교하기 위한 18개의 시험체에 대한 push-out실험을 수행하였다. 할석으로 접합면을 만든 시험체에 비해 리브라스를 이용한 시험체가 전단저항에 월등한 성능을 보여 주었으며 그리고 리브라스를 절곡하여 만든 전단키가 전단저항을 향상시키는데 큰 역할을 하였다.

• Journal of Construction Engineering and Project Management
• /
• 제2권1호
• /
• pp.14-19
• /
• 2012

Maturity models allow organizations to assess and compare their own practices against best practices or those employed by competitors, with the intention to map out a structured path to improvement. This research explores the aspects of the Maturity Models that are relevant to distinguish them from one to another. The different Project Management maturity models for define maturity differently and measure different things to determine maturity. Because of this, organizations should give careful consideration to select appropriate maturity model. The main reason behind this research lies on the modification to the existing Organizational Project Management Maturity Model (OPM3) by adding four knowledge areas, dedicated to construction industry as best practices. These are Safety, Environment, Financial and Claim Management. This Model contains (Yes/No) questions; all of these questions must be answered before the user reviews the results that describe the overall maturity and areas of strength and weakness of an organization. The research presents the implementation of the proposed Model Construction Enterprises Maturity Model (CEM2). All the components of the developed Model have been implemented in Microsoft Access. CEM2 helps Construction Enterprises to assess their Maturity Level and know Areas of Weaknesses for future improvement. The easy to use Yes/No user interfaces help enterprises' employees to assess the maturity level of their enterprises. The Model maintains users' responses in its database; as such, many employees from different enterprise divisions can be involved during assessment phase in several sessions.

• 한국측량학회지
• /
• 제27권4호
• /
• pp.505-513
• /
• 2009

최근 첨단도시 건설을 위한 건설정보화 연구가 활발히 진행 중이다. 건설현장의 건설요소인 인력, 자재 및 장비의 동적인 위치정보를 취득하기 위한 RTLS(Real-Time location system) 개발이 그 중 하나이며, 특히 자재, 장비, 인력과 같은 건설요소의 동적 위치정보를 획득하여 그 요소들을 효율적으로 관리하여, 안전 및 공사비용을 절감 효과를 꾀하고 있다. RTLS 시스템의 건설현장에 도입하기 위해서는 RTLS Reader, 즉 AP(Access Point) 전파가 도달하는 거리를 고려한 3차원 분석을 통해 사전에 AP의 설치 위치를 모의해야 할 필요가 있다. 본 연구에서는 지상라이다를 사용하여 구축된 공간정보를 기반으로 한 3차원 전파세기 모의 소프트웨어를 제작하였다. 또한 4곳의 실험지역을 선정하여 모의 실험결과와 실제 실험을 통해 측정된 전파세기를 비교하였다. 그 실험 결과로 4곳의 실험지역 중 가시 확보가 좋은 곳에서 측정된 전파세기가 전파모델식을 통하여 모의된 전파세기와 가장 흡사한 결과를 나타냈다.