• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.302-307
• /
• 2006

The formation and processing of organic insulators on the device performance have been studied in the fabrication of organic thin film transistors (OTFTs). The series of polyvinyls, poly-4-vinyl phenol(PVP) and polyvinyltoluene (PVT), were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series: PVP(10 wt%) copolymer, 5 wt% cross-linked PVP(10 wt%), PVP(20 wt%) copolymer, 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current characteristics. Finally, inverted staggered OTFTs using the PVP(20 wt%) copolymer, 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%) as gate insulators were fabricated on the polyether sulphone (PES) substrates. In our experiments, we could obtain the maximum field effect mobility of 0.31 $cm^2/Vs$ in the device from 5 wt% cross-linked PVP(20 wt%) and the highest on/off current ratio of $1.92{\times}10^5$ in the device from 10 wt% cross-linked PVP(20 wt%).

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.37-42
• /
• 2006

The preparation and processing of PVP-gate insulators on the device performance have been studied in the fabrication of organic thin film transistors (OTFTs). One of polyvinyl series, poly-4-vinyl phenol(PVP) was used as a solute and propyleneglycol monomethyl etheracetate(PGMEA) as a solvent in the formation of organic gate solutions. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compounds. From the measurements of electrical insulating characteristics of metal-insulator-metal (MIM) samples, PVP-based insulating layers showed lower leakage current according to the increase of concentration of PVP and poly (melamine-co-formaldehyde) to PGMEA in the formation of organic solutions. The PVP(20 wt%) copolymer with composition of 20 wt% PVP to PGMEA and cross-linked PVPs in which 5 wt% and 10 wt% poly (melamine-co-formaldehyde) hardeners had been additional]y mixed into PVP(20 wt%) copolymers were used as gate dielectrics in the fabrication of OTFTs, respectively. In our experiments, the maximum field effect mobility of $0.31cm^2/Vs$ could be obtained in the 5 wt% cross-linked PVP(20 wt%) device and the highest on/off current ratio of $1.92{\times}10^5$ in the 10 wt% cross-linked PVP(20 wt%) device.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.359-363
• /
• 2005

The organic insulation devices with MIM (metal-insulator-metal) structures as PVP gate insulation films were prepared for the application of organic thin film transistors (OTFT). The co-polymer organic insulation films were synthesized by using PVP(poly-4-vinylphenol) as solute and PGMEA (propylene glycol monomethyl ether acetate) as solvent. The cross-linked PVP insulation films were also prepared by addition of poly (melamine-co-formaldehyde) as thermal hardener. The leakage current of the cross-linked PVP films was found to be about 300 pA with low current noise. and showed better property in electrical properties as compared with the co-polymer PVP insulation films. In addition, cross-linked PVP insulation films showed better surface morphology (roughness), showing about 0.11${\~}$0.18 nF in capacitance for all PVP film samples.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.39-43
• /
• 2006

The polyvinyl series organic films as gate insulators of thin film transistor(TFT) have been processed and characterized on the polyether sulphone (PES) substrates . The poly-4-vinyl phenol(PVP) and polyvinyl toluene (PVT) were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series; copolymer PVP(10 wt%), 5wt% cross-linked PVP(10 wt%), copolymer PVP(20 wt%), 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current of 1.2 pA at ${\pm}10V$. The ms value of surface roughness and the capcitance per unit area are 2.41 and $1.76nF/cm^2$ in the case of 10 wt% cross-linked PVP(20 wt%) layer, respectively.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.83-88
• /
• 2005

유기 절연층을 갖는 유기 박막트랜지스터 (organic TFT)를 제작하여 소자 성능을 조사하였다. 유기 절연층의 형성에서는 polyvinyl 계열의 PVP(poly-4-vinylphenol)와 PVT(polyvinyltoluene)를 용질로, PGMEA (propylene glycol mononethyl ether acetate)를 용매로 사용하였다. 또한, 열경화성 수지인 poly(melamine-co-formaldehyde)를 경화제로 사용하여 유기 절연층의 cross-link 를 시도하였다. MIM 구조로 유기 절연층의 특정을 측정한 결과, PVT는 PVP에 비해 절연 특성이 떨어지는 경향을 보였다. 게이트 절연막의 제작에서 PVP를 cobpolymer 방식과 cross-linked 방식으로 실험 해 본 결과, cross-link 방식에서 낮은 누설전류 특성을 나타내었다. OTFT 제작에서는 PVP를 용질로, poly(melanine-co-formaldehyde)를 경화제로 사용한 cross-linked PVP 를 게이트 절연막으로 이용하였다. PVP copolymer($20\;wt\%$)에 $10\;wt\%$ poly(melamine- co-formaldehyde)를 혼합한 cross-linked PVP 를 게이트 절연막으로 사용하여 top contact 구조의 OTFT를 제작한 결과 약 $0.23\;cm^2/Vs$의 정공 이동도와 약 $0.4{\times}10^4$의 평균 전류점멸비를 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.312-314
• /
• 2009

We have fabricated pentacene based organic thin film transistors (OTFTs) with formulated poly[4-vinylphenol] (PVP) gate dielectrics. The gate dielectrics is composed of PVP, poly[melamine-coformaldehyde] (PMF) and photo-initiator [1-phenyl-2-hydroxy-2-methylpropane-1-one, Darocur1173]. By adding small amount (1 %) of photo-initiator, the cross-linking temperature is lowered to $115^{\circ}C$, which is lower than general thermal curing reaction temperature of cross-linked PVP (> $180^{\circ}C$). The hysteresis and the leakage current of the OTFTs are also decreased by adding the PMF and the photoinitiator in PVP gate dielectrics.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.1
• /
• pp.27-31
• /
• 2007

The cpapcitors with MIM(metal-insulator-metal) structures using PVP gate insulation films were prepared for the application of flexible organic thin film transistors (OTFT). The co-polymer organic insulation films were synthesized by using PVP(poly-4-vinylphenol) as a solute and PGMEA(propylene glycol monomethyl ether acetate) as a solvent. The cross-linked PVP insulation films were also prepared by addition of poly(melamine-co-formaldehyde) as thermal hardener. The leakage current of the cross- linked PVP films was found to be about 1.3 nA on Al/PES(polyethersulfone) substrate, whereas, on ITO/ glass substrate was about 27.5 nA indicating improvement of the leakage current at Al/PES substrates. Also, the capacitances of all prepared samples on ITO/glass and Al/PES substrates w ere ranged from 1.0 to $1.2nF/cm^2$, showing very similar result with the calculated capacitance values.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1027-1029
• /
• 2004

In this paper, we have fabricated pentacene thin film transistors (TFTs) using polyvinylphenol (PVP) copolymer and cross-linked PVP as gate insulator on glass and plastic (PET) substrate. Depending on the density of PVP and cross-link material the performance has been changed. We obtained the best device performance with the mobility of 0.32cm2/V${\cdot}$sec and the on/off current ratio of 1.19${\times}$106 for the case of 10wt% PVP copolymer mixed with 5wt% poly (melamine-co-formaldehyde). Additionally using pentacene TFTs with the above PVP gate insulator, we fabricated the integrated circuits including inverter which produced the gain of 9.7.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1700-1701
• /
• 2011

본 논문에서는 게이트 절연막인 poly(4-vinylphenol) (PVP) 용제 농도 변화에 따른 유기 박막 트랜지스터를 제작하고 그 특성을 분석하였다. PVP는 propylene glycol monomethyl ether acetate(PGMEA) 와 poly melamine-co-formaldehyde (CLA)를 혼합하여 cross linked PVP를 만들어 사용하였다. Cross-liked PVP의 CLA 농도 비율을 각각 6 wt%, 9 wt%로 변화시켜 유기 박막 트랜지스터를 제작하고 소자의 전기적 특성을 분석 하였다.

• Journal of Sensor Science and Technology
• /
• v.30 no.1
• /
• pp.51-55
• /
• 2021

We demonstrated a polymer dielectric with low leakage characteristics through an optimal blade coating method for low-cost and large-scale fabrication of metal-insulator-metal (MIM) capacitors. Cross-linked poly(4-vinylphenol) (C-PVP), which is a typically used polymer dielectric, was coated on a 10 × 10 cm indium-tin-oxide (ITO) deposited glass substrate by changing the deposition temperature (TD) and coating velocity (VC) in the blade coating. During the blade coating, the thickness of the thin c-PVP varied depending on TD and VC owing to the 'Landau-Levich (LL) regime'. The c-PVP-dielectric-based MIM capacitor fabricated in this study showed the lowest leakage current characteristics (10-6 A/㎠ at 1.2 MV/㎠, annealing at 200 ℃) and uniform electrical characteristics when TD was 30 ℃ and VC was 5 mm/s. In addition, at TD = 30 ℃, stable leakage characteristics were confirmed when a different electric field was applied. These results are expected to positively contribute to applications with next-generation electronic devices.