• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.123-125
• /
• 2004

The importance for Internet security has being increased and the Internet Protocol Security (IPSec) standard, which incorporates cryptographic algorithms, has been developed as one solution to this problem. IPSec provides security services in IP-Layer using IP Authentication Header (AH) and IP Encapsulation Security Payload (ESP). In this paper, we propose IPSec cryptographic processor design based AMBA architecture. Our design which is comprised Rijndael cryptographic algorithm and HAMC-SHA-1 authentication algorithm supports the cryptographic requirements of IP AH, IP ESP, and any combination of these two protocols. Also, our IPSec cryptographic processor operates as AMBA AHB Slave. We designed IPSec cryptographic processor using Xilinx ISE 5.2i and VHDL, and implemented our design using Xilinx's FPGA Vertex XCV600E.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.169-172
• /
• 2000

This paper describes design of cryptographic processor which can execute SEED, DES, and triple DES encryption algorithm. To satisfy flexible architecture and area-efficient structure, the processor has I unrolled loop structure with hardware sharing and can support four standard mode, such as ECB, CBC, CFB, and OFB modes. To reduce overhead of key computation, the precomputation technique is used. Also to eliminate increase of processing time due to data input and output time, background I/O technique is used which data input and output operation execute in parallel with encryption operation of cryptographic processor. The cryptographic processor is designed using 2.5V 0.25 $\mu\textrm{m}$ CMOS technology and consists of about 34.8K gates. Its peak performances is about 250 Mbps under 100 Mhz ECB SEED mode and 125 Mbps under 100 Mhz triple DES mode.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.117-120
• /
• 2000

This paper describe VLSL design of crytographic processor which can execute triple DES and DES encryption algorithm. To satisfy flexible architecture and area-efficient structure, the processor has 1 unrolled loop structure without pipeline and can support four standard mode, such as ECB, CBC, CFB, and OFB modes. To reduce overhead of key computation , the key precomputation technique is used. Also to eliminate increase of processing time due to data input and output time, background I/O techniques is used which data input and output operation execute in parallel with encryption operation of cryptographic processor. The cryptographic processor is implemented using Altera EPF10K40RC208-4 devices and has peak performance of about 75 Mbps under 20 Mhz ECB DES mode and 25 Mbps uder 20 Mhz triple DES mode.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1027-1030
• /
• 2003

In this paper, we designed GF(2$^{m}$ ) inversion and division processor for Elliptic Curve Cryptographic system. The processor that has 191 by m value designed using Modified Euclid Algorithm. The processor is designed using 0.35 ${\mu}{\textrm}{m}$ CMOS technology and consists of about 14,000 gates and consumes 370 mW. From timing simulation results, it is verified that the processor can operate under 367 Mhz clock frequency due to 2.72 ns critical path delay. Therefore, the designed processor can be applied to Elliptic Curve Cryptographic system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.309-322
• /
• 2021

In this study, an extension instruction set for high-speed operation of the ARIA block cipher algorithm on RISC-V processor is added to support high-speed cryptographic operation on low performance IoT devices. We propose the efficient ARIA cryptographic instruction set which runs on a conventional 32-bit processor. Compared to the existing software cryptographic operation, there is a significant performance improvement with proposed instruction set.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.5
• /
• pp.37-47
• /
• 2004

The security of personal informations has been an important issue since the field of smart card applications has been expanded explosively. The security of smart card is based on cryptographic algorithms, which are highly required to be implemented into hardware for higher speed and stronger security. In this paper, a SEED cryptographic processor is designed by employing one round key generation block which generates 16 round keys without key registers and one round function block which is used iteratively. Both the round key generation block and the F function are using only one G function block with one 5${\times}$l MUX sequentially instead of 5 G function blocks. The proposed SEED processor has been implemented such that each round operation is divided into seven sub-rounds and each sub-round is executed per clock. Functional simulation of the proposed cryptographic processor has been executed using the test vectors which are offered by Korea Information Security Agency. In addition, we have evaluated the proposed SEED processor by executing VHDL synthesis and FPGA board test. The die area of the proposed SEED processor decreases up to approximately 40% compared with the conventional processor.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.15-25
• /
• 2002

In this paper a design of high performance cryptographic processor which implements AES Rijndael algorithm is described. To eliminate performance degradation due to round-key computation delay of conventional processor, the on-the-fly precomputation of round key based on modified round structure is adopted. And on-the-fly round key generator which supports 128, 192, and 256-bit key has modular structure. The designed processor has iterative structure which uses 1 clock cycle per round and supports three operation modes, such as ECB, CBC, and CTR mode which is a candidate for new AES modes of operation. The cryptographic processor designed in Verilog-HDL and synthesized using 0.251$\mu\textrm{m}$ CMOS cell library consists of about 51,000 gates. Simulation results show that the critical path delay is about 7.5ns and it can operate up to 125Mhz clock frequency at 2.5V supply. Its peak performance is about 1.45Gbps encryption or decryption rate under 128-bit key ECB mode.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.852-855
• /
• 2005

This paper introduces a case study of designing a cryptographic processor dedicated to VPN/SSL system. The designed processor supports not only block cipher algorithm, including 3DES, AES, and SEED, but also 163 bit ECC public key crypto algorithm. Moreover, we adopted PCI Master interface in the design, which guarantees fast computation of cryptographic algorithm prevalent in general information security systems.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.424-424
• /
• 2006

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.3
• /
• pp.113-123
• /
• 2007

This paper presents a high-performance elliptic curve cryptographic processor over $GF(2^m)$. The proposed design adopts Lopez-Dahab Montgomery algorithm for elliptic curve point multiplication and uses Gaussian normal basis for $GF(2^m)$ field arithmetic operations. We select m=163 which is the smallest value among five recommended $GF(2^m)$ field sizes by NIST and it is Gaussian normal basis of type 4. The proposed elliptic curve cryptographic processor consists of host interface, data memory, instruction memory, and control. We implement the proposed design using Xilinx XCV2000E FPGA device. Based on the FPGA implementation results, we can see that our design is 2.6 times faster and requires significantly less hardware resources compared with the previously proposed best hardware implementation.