• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.2
• /
• pp.21-27
• /
• 2014

In this paper, a planar sleeve monopole antenna for indoor digital TV reception is presented. The antenna has broadband property with the planar monopole and ground of sleeve. Sleeve monopole and ground conductors of the antenna are on the same plane, and exited through CPW feeding. Sleeve monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 epoxy dielectric substrate of ${\varepsilon}r=4.4$, and the size is $20[mm]{\times}170[mm]{\times}1.6[mm]$ dimension. So the internal antenna is suitable. The measurement results of the fabricated antenna, return loss is larger than -10 [dB] in 470~806 [MHz]. Maximum gain is 0.59 [dBi] on E-plane at 810 MHz and 1.70 [dBi] on H-plane at 640 [MHz]. Radiation pattern is about the same that of dipole antenna at all frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2600-2606
• /
• 2014

In this paper, a design method for a planar dipole pair antenna for an operation in the frequency band of 470-806 MHz for terrestrial indoor digital TV (DTV) is studied. The proposed antenna is composed of two planar dipoles connected through conducting strips, and the antenna is fed by a microstrip line. By employing different lengths of dipoles, a broadband characteristics is obtained, and the antenna is size-reduced by bending both ends of the longer dipole. The effects of design parameters on the antenna performance are examined by simulation, and the parameters are adjusted for terrestrial DTV band use. A prototype of the antenna for indoor DTV reception is fabricated on an FR4 substrate with a size of $240mm{\times}139.5mm$ and tested experimentally. The experiment results show that the frequency band for a VSWR < 2 ranges 458-864 MHz(61.4%), and it corresponds fairly well with the simulated band of 448-868 MHz(63.8%).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.979-986
• /
• 2013

In this paper, a TVS diode which is commonly used as a ESD protector in wireless communication devices could cause antenna wireless sensitivity to decrease has been analyzed. When a smartphone doesn't have enough space to place many components, there would be its speaker near antenna area. In order to protect ESD coming through the speaker there also could be a TVS within antenna GND area. Digital audio signal which was sent to speaker and CDMA RF communication signal coupled from antenna was mixed by TVS. And this leakage current running through TVS resulted in decrease of antenna wireless sensitivity. The results of various experiments can be explained using circuit simulation. Following works will give us some insights that can reduce unwanted summation of digital and RF signal due to nonlinearity of ESD protectors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.497-502
• /
• 2014

In this paper, a design method for a broadband planar dipole antenna for terrestrial digital television (DTV) reception is studied. The dipole is modified to half bow-tie type for size reduction. The balun between feeding microstrip line and coplanar strip (CPS) line is implemented with a rectangular patch inserted along the center of the CPS line. The proposed antenna is the structure of dual resonances, one is due to the dipole and the other is due to the CPS line attached by the balun. The effects of various geometrical parameters on the antenna performance are examined, and the antenna is designed for terrestrial DTV band (470-806 MHz). The prototype antenna is fabricated on an FR4 substrate with a size of $95mm{\times}178mm$, and tested experimentally to verify the results of this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.159-160
• /
• 2014

In this paper, a design method for a broadband planar dipole antenna for the terrestrial digital television (DTV) reception is studied. The proposed antenna is an asymmetrical planar dipole consists of a rectangular patch with an embedded t-shaped slit, and the antenna shape is printed on a side of an FR4 substrate. The effects of geometrical parameters on the antenna performance are examined, and the parameters are adjusted to operate in the DTV frequency band of 470-806 MHz. The prototype antenna is fabricated on an FR4 substrate with a size of $260mm{\times}30mm$. The performance of the antenna is tested experimentally to verify the results of this study.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.581-586
• /
• 2020

In this paper, the design process and method for a compact wideband loop antenna for terrestrial digital TV (DTV) and ultra high definition (UHD) TV applications was proposed. Horizontal slits were added on the two circular sectors of the proposed loop antenna in order to miniaturize the existing wideband loop antenna consisting of a square loop and two circular sectors. A CPW transmission line was inserted in the center of the lower circular sector as a feed line. The CPW feed line was designed using the 75 ohm port impedance for DTV and UHD TV applications, and a tapered center-signal line was designed to improve the impedance matching. The final designed antenna was fabricated on an FR4 substrate with a thickness of 0.8 mm. The experiment results show that the proposed compact loop antenna operates in the frequency band of 444.3-820.1 MHz for a VSWR < 2, which fully covers the DTV and UHD TV bands.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.73-74
• /
• 2015

In this paper, a digital terrestrial TV reception antenna which can be applied to the fade zone was designed and investigated. The proposed antenna was configured for a wire antenna structure with $16cm{\times}14cm$, and the antenna parameters are calculated by using the MoM method. The proposed antenna can be used to the receiver for domestic digital broadcast in UHF.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.87-88
• /
• 2016

In this paper, a digital terrestrial TV reception antenna which can be applied to the house and vehicle windows was designed and investigated. The proposed antenna was configured for a monopole antenna structure with $230mm{\times}430mm{\times}3mm$, and the antenna parameters are calculated by using the OpenFDTD simulator. The proposed antenna can be used to the receiver for domestic digital broadcast in UHF.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.1996-2002
• /
• 2013

In this paper, a design method for a compact broadband planar monopole antenna fed by a coplanar waveguide (CPW) is studied. The proposed broadband monopole is optimized for terrestrial digital television (DTV) reception. In order to achieve broadband characteristics, the monopole and ground conductor are gradually tapered. By loading slit pairs on both monopole and ground plane, the proposed antenna is miniaturized. The monopole is fed by a CPW with 75-ohm characteristic impedance on an FR4 substrate and its size is $100mm{\times}200mm$. The optimized monopole antenna for DTV band (470-806 MHz) is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2345-2350
• /
• 2014

In this paper, measurement methods for the characteristics of antennas for indoor digital TV (DTV), having 75-ohm port impedance, are introduced. Reference impedance of typical radio frequency (or microwave) systems and measurement equipments is 50 ohm. However, the reference impedance of antennas for indoor DTV is 75 ohm, and the characteristics of the antennas cannot be measured directly using the measurement equipments. Measurement methods, using test equipments with reference impedance of 50 ohm, for the characteristics(impedance, radiation patterns, and gain) of antennas designed to fit for 75 ohm port are introduced.