• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1043-1059
• /
• 2021

Forest and agricultural land are very important factors in the environmental ecosystem and securing food resources. Forest and agricultural land should be monitored regularly. CAS500-4 data are expected to be effectively used as a supplement of monitoring forest and agricultural land. Prior to the launch of the CAS500-4, the relative canopy height error analysis of the digital elevation model on South Korea was performed to determine the vertical target accuracy. Especially, by considering area of interest of the CAS500-4 (mountainous or agricultural area), it is conducted that vertical error analysis according to the slope and canopy. For Gongju, Jeju, and Samcheok, the average root mean squared differences were calculated compared to the drone LiDAR digitalsurface models, which were filmed in autumn and winter and the 5 m digital elevation model from the National Geographic Information Institute. As a result, the Shuttle radar topography mission digital elevation model showed a root mean squared differences of about 8.35, 8.19, and 7.49 m, respectively, while the Copernicus digital elevation model showed a root mean squared differences of about 5.65, 6.73, and 7.39 m, respectively. In addition, the root mean squared difference of shuttle radar topography mission digital elevation model and the Copernicus digital elevation model according to the slope angle were estimated on South Korea compared to the 5 m digital elevation model from the National Geographic Information Institute. At the slope angle of between 0° to 5°, root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model showed 3.62 and 2.52 m, respectively. On the other hands root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model respectively showed about 10.16 and 11.62 m at the slope angle of 35° or higher.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.931-938
• /
• 2006

Using high resolution stereoscopic imaging system three digital elevation model of tunnel face is acquired. The images oriented within a given tunnel coordinate system are brought into a stereoscopic vision system enabling three dimensional inspection and evaluation. The possibilities for the prediction ahead and outside of tunnel face have been improved by the digital vision system with 3D model. Interpolated image structures of rock mass between subsequent stereo images will enable to model the rock mass surrounding the opening within a short time at site. The models shall be used as input to numerical simulations on site, comparison of expected and encountered geological conditions, and for the interpretation of geotechnical monitoring results.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.463-471
• /
• 2008

The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using digital terrain model (DTM) and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method used in a previous research. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.217-223
• /
• 2014

With precise sensor position, attitude element, and imaging resolution, a simulated geospatial image can be generated. In this study, a satellite image is simulated using SPOT ortho-image and global elevation data, and the geometric similarity between original and simulated images is analyzed. Using a SPOT panchromatic image and high-density elevation data from a 1/5K digital topographic map data an ortho-image with 10-meter resolution was produced. The simulated image was then generated by exterior orientation parameters and global elevation data (SRTM1, GDEM2). Experimental results showed that (1) the agreement of the image simulation between pixel location from the SRTM1/GDEM2 and high-resolution elevation data is above 99% within one pixel; (2) SRTM1 is closer than GDEM2 to high-resolution elevation data; (3) the location of error occurrence is caused by the elevation difference of topographical objects between high-density elevation data generated from the Digital Terrain Model (DTM) and Digital Surface Model (DSM)-based global elevation data. Error occurrences were typically found at river boundaries, in urban areas, and in forests. In conclusion, this study showed that global elevation data are of practical use in generating simulated images with 10-meter resolution.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.141-152
• /
• 1993

This study aims to generate digital elevation model from digital satellite imagery. Digital elevation model is being increasingly used for geo-spatial information system database development and for digital map production. Image matching technique was applied to acquire conjugate image coordinates and the algorithm for digital elevation model generation is presented in this study The exterior orientation parameters of the satellite imagery is determined by bundle adjustment and standard correlation was applied for image matching conjugate of image points. The window as well as the searching area have to be defined in image matching. Different sizes of searching area were tested to study the appropriate size of the searching area. Various coordinate transformation methods were applied to improve the computation speed as well as the geometric accuracy. The results were then statistically analysed after which the searching area is determined with the safety factor. To evaluate the accuracy of digital elevation model, 3-D coordinates were extracted from 1/5000 scale topographic map and this was compared to the digital elevation model generated from satellite imagery. The algorithm for generation of digital elevation model generated from satellite imagery is presented in this study which will prove effective in the database development of geo-spatial information system and in digital elevation modelling of large areas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.83-96
• /
• 1993

The orthophto map is seen as the form of picture with the uniform reduced scale as the current terrain map. Thus it provides a reasonable feeling of scene and is easy to be interpreted. Furthermore, digital orthophoto is currently used as the basic terrain information data of the Geo-Spatial Information System(GSIS). Therefore, the orhtophoto map has high potential use as a future terrain map. This paper studies the method of producing orthophoto map by using the digital satellite imagery data taken from SPOT satellite of France. The production of orthophoto map requires the process of generating orthophoto imagery with digital elevation model, which process is called digital differential rectification. As the final accuracy of orthophoto map depends on that of digital elevation model, the precise and efficient production method of digital elevation model should be preceded. This study investigated the method of producing digital elevation model directly from SPOT satellite imagery and generated ortho-image by resampling the original SPOT imagery through digital differential rectification. Finally, Simple orthophoto map was made by overlaying the ortho-image and the contour map from digital elevation model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.143-148
• /
• 2008

This Study is about driving simulation after road design by 3D-GIS in digital elevation model from digital aerial photogrammetry. For designing roads efficiently it's very important to consider geographical features before design when analyze the view. Nevertheless, existing studies is mainly restricted in the mountainous, despite of using digital map or aerial photogrammetry and the study which used aerial photo in the area where the road designing is made really is not get executed. Therefore, this study will do 3D-road design and driving simulation by appling really road design data to topography, on the basis of digital elevation generated from aerial photogrammetry.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.3
• /
• pp.105-120
• /
• 2018

This study estimates possibility and limitation on production of DEM using aerial photo by comparison of DEMs using aerial photo and digital map. Mountain and urban areas show higher elevation in DEM using aerial photo than in DEM using digital map, due to height of vegetation cover and buildings, respectively. However, artificial affects due to bridge, embankment and road construction are responsible for areas with higher elevation in DEM using digital map than in DEM using aerial photo. This difference in elevation between DEMs seems to be caused by rapid change in real elevation that is not reflected in digital map. There is little difference in elevation between DEMs in plain and area with little or no vegetation cover. This study suggests that problems associated with vegetation cover and error by GCP should be fixed, although DEM using aerial photo can quantitatively and 3-dimensionally reconstruct topography with a high resolution.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.207-214
• /
• 2003

To obtain Digital Elevation Model(DEM) from an exposed rock mass, techniques such as laser scanning and digital stereo photogrammetric technique are recently applied. We have obtained the DEM of the rock slope using above techniques in this study, and examined a suitability and improvement of the photogrammetry for the rock slope by overlapping the DEM. This study can be applied to the measurement of fracture orientations, the prediction of rock joint network, and the analysis on the change of the rock slope.