• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.96-105
• /
• 1994

Cup drawing tests were performed to evaluate the friction characteristics of sheet metals. The linear relationship between drawing force and blank holding force obtained from the cup drawing test was used to calculate the coefficient of friction of the sheet metal. The friction coefficient was compared to that from conventional draw bead friction test. It was clarified that the cup drawing test can be used as a simple and convenient method for evaluating the friction characteristic of the sheet metal and also lubricity of the lubricant used.

• Journal of Oriental Neuropsychiatry
• /
• v.12 no.2
• /
• pp.185-191
• /
• 2001

Objectives: This study aimed to evaluate the usefulness as a screening test of Clock Drawing Test(CDT) compared with the standard K-DRS in probably dementia. Methods: The subjects for this study consisted of 19 elderly persons who visited to the outpatient department of Oriental Neuropsychiatry of the Kyunghee Oriental hospital. They received the K-DRS and the Clock Drawing Test. Three observers evaluated them with circle, numbers, hands. Inter-rater reliability of scores from Clock Drawing Test was assessed and Pearson correlation coefficients were used to examined the relationships between scores from Clock Drawing Test and K-DRS. Results: Correlations between individual raters was highly significant (r= .957, .974, and .970, respectively: p<.001). There was stastically significant correlations between K-DRS and CDT scores (r= 0.849, p<.001). Conclusions: The CDT can be rated reliably by observers and correlations between CDT and K-DRS is significantly high. We confirmed the usefulness of CDT as simple, easily administered, low cost, and reliable general screening test for dementia.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.149-154
• /
• 2001

This paper presents the experimental study of the static stiffness for the BT Shank(7/24 Long Taper) and the HSK Tool Shank(1/10 Short taper). The static stiffness test was performed under different experimental conditions. The results obtained are as follows ; As known in the analysis results of the Load-Deflection diagram of the 7/24 Test tool shank, it is turned out that the diagram is a linear characteristics without regard to axial drawing force and according as the axial drawing force get to the 6kN, the static stiffness of the shank increase linearly. Thus the effective axial drawing force which maintains the static stiffness of the Main spindle taper of Machine Tool is larger than 6kN. It is found that the Load-Deflection diagram with 6kN of drawing force in the 1/10 Test tool shank is characterized by non-linear. But according as the axial drawing force is increasing by the 8kN, the diagram is characterized by linear. And increasing amount of deflection is about 60%. Therefore commendable axial drawing force is larger than 8kN. As a result, considering that the actual drawing force of the Machining Center is about 1300kgf and axial drawing force 12kN is equivalent amount as a 1220kgf, it is turned out that 1/10 Test tool shank superior to 7/24 Test tool shank in the static stiffness.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.123-129
• /
• 2018

A rotational drawing die which can form a long tube with spiral grooves on the surface is presented. The main feature of the proposed die is a rotation insert that is embedded into the die container for the die to freely rotate with respect to the drawing centerline as the materials are drawn. We employed a three-dimensional finite element model to investigate the effects of the rotational die on the material filling of spiral grooves. The material used in the finite element analysis was stainless 304. We also performed a pilot drawing test to verify the usefulness of the proposed rotational drawing die. Results reveal that the material filling of spiral grooves by the proposed rotational drawing die was in good agreement for both the finite element analysis and the drawing test. We found that the underfill in a conventional drawing die was reduced in the proposed rotational drawing die.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.463-468
• /
• 2000

An experimental study has been performed to investigate the forming characteristics of pre-coated metals(PCMs) widely used in domestic appliances through Erichsen tests and deep drawing tests. Erichsen tests are performed to find out the forming limits of seven pre-coated metals in normal conditions. Rectangular deep-drawing tests are carried out to know the effects of die materials and blank metals on forming loads and surface defects of final PCM products. In the deep-drawing test, four die materials ［STD11(TiCN), STD11, STD11(TD), AMPCO] are used. In the Erichsen test, the forming limits of PCMs are obtained from flaking or crack of pre-coated films and lower than those of base metals. In respect of surface roughness and forming load, STD11(TD) and AMPCO materials are superior to my other die-materials used in the deep-drawing test.

• Transactions of Materials Processing
• /
• v.3 no.1
• /
• pp.51-62
• /
• 1994

Cup drawing test and U-bending test were performed to evaluate the friction characteristics of sheet materials for the different deformation modes involved in stamping process. The coefficient of friction calculated from the each test was compared to that obtained from the draw bead friction test. It was clarified that the cup drawing test could be simply used for evaluating the friction characteristic of sheet material in deep drawing process with high contacting pressure. However the U-bending test is suitable to evaluate the frictional characteristic of sheet material in bending process with low contacting pressure.

• Journal of Families and Better Life
• /
• v.25 no.5
• /
• pp.15-29
• /
• 2007

The purposes of this study were to examine if there is a relationship between elderly people's anxiety towards death and their reactions to the Star-Wave drawing, and to verify if the Star-Wave drawing was a good enough tool to measure elderly people's degree of death anxiety. The subject for this study were 307 elderly people (male 127, female 180) over 60 years of age with no physical and cognitive damage, who were residing in Geongsan city and attending colleges or welfare centers for the aged. The collected data were analyzed with SPSS WIN(ver. 12.0) program, and factor analysis, correlation analysis, Chi-square test, t-test, one-way ANOVA, and $Scheff\acute{e}$ test were utilized. The results showed that factors showing different levels of anxiety towards death in the Star-Wave drawing were the total harmony of the drawing, drawing style, repetition of wave, size of the star, and location of the star. In particular, the group that drew the Star-Wave drawing with total harmony felt less anxiety towards death than the other group. Therefore, the results of this study suggested a possibility of the Star-Wave drawing to be used as a good tool that could diagnose the elderly's degree of anxiety towards death.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.707-717
• /
• 2021

The purpose of this study was to explore whether PPAT drawing using an application can be developed on digital devices for game addicts. The PPAT drawing test is useful and reliable for verifying problem-solving skills in how people pick apples. As a result of this study, the over-immersion group scored lower than the average user group in the "problem Solving" category of the PPAT drawing test using the PPAT drawing applicaion on digital devices, and expressed by not reaching for apples, or by picking apples without reasonable support. The findings in this study suggest that the PPAT drawing test application on digital devices has significantly demonstrated its original purpose of 'problem resolution', as well as future psychotherapeutic interventions for Internet over-immersion subjects as well as users who are familiar with digital devices.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.136-143
• /
• 2002

Warm draw die technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical and square cup drawing of stainless-aluminum clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to $180^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch comer area. Test materials chosen for experiments are STS304-A1050-STS304 clad sheets. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio and relative drawing depth as well as quality of drawn cups(distribution of thickness)are investigated and validity of warm drawing process is also discussed. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant remover and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.15-20
• /
• 2001

This paper presents the experimental study of the static stiffness for the BT shank(7/24 long taper) and the HSK tool shank(1/10 short taper) in the main spindle taper of machine tool. The static stif71ess test was performed under different experimental conditions. It is turned out that the effective axial drawing force is larger than 6kN in the 7/24 test tool shank and BkN in the 1/10 test tool shank. As a test result, considering that the actual drawing force of the machining center is about 1300k2f and axal drawing force 12kN is equivalent amount as a 1220kgf, it is turned out that 1/10 test tool shank superior to 7/24 test tool shank in the static stiffness.