• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.36-42
• /
• 2007

A low-power compact driver for multistandard physical layer is presented. The proposed driver achieves low power and small area through the voltage-mode driver with trans-impedance configuration and the novel hybrid driver,. In the voltage-mode driver, a trans-impedance configuration alleviates the problem of limited common-mode range of error amplifiers and the area and power overhead due to pre-amplifier. For a standard with extended output swing, only current sources are added in parallel with the voltage-mode driver, which is named a 'hybrid driver'. The hybrid architecture not only increases output swing but reduces overall driver area. The overall driver occupies $0.14mm^2$. Power consumptions under 3.3-V supply are 24.5 mW for the voltage-mode driver and 44.5 mW for the hybrid driver.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.120-126
• /
• 2006

A gate driver with Boot-strap chain is proposed to drive Multi-level PDP sustain switches. The proposed gate driver uses only one boot-strap capacitor and one diode per each MOSFETs switch without floating power supply. By adoption of this gate driver circuits, the size, weight and the cost of the driver board can be reduced.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.1
• /
• pp.70-76
• /
• 2001

The disc type driver with Nd-Fe-B magnet is one of the servo drivers, which have many applications in various fields. For efficient and easy, it is desirable to be small and thin in its size. However, the driver which uses a conventional wire reel is very difficult to be reduced in its volume. one of alternatives to achieve the above goal is the thick film multilayer winding. The winding method will significantly reduce the total volume of the driver. Therefor this paper proposed the thick film multilayer winding methods and consists of parts: design manufactures, properties and applications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.258-263
• /
• 2005

Statement of problem. Implant screw loosening has been remained a problem in implant prosthodontics. The time needed to insert screw driver into abutment screw head should be shortened for the purpose of decreasing the chair time. Purpose. The purpose of this study was to investigate the effects of the design of abutment screw driver on the amount of time for insertion of screw driver into abutment screw head. Material and methods. Hexagonal and rectangular types of abutment screw drivers were used. The original abutment screw drivers were modified by grinding acute angle of the screw driver tip (modified drivers). Group 1 : hexagonal type abutment screw and original driver Group 2 : hexagonal type abutment screw and modified driver Group 3 : rectangular type abutment screw and original driver Group 4 : rectangular type abutment screw and modified driver UCLA lab analogues were located in acrylic resin block. The angulations of them were 0 and 20 degrees. The times needed for insertion were measured. Group 1 and 3 were used as controls. Results. 1. Group 2 showed shorter insertion time than group 1, regardless of implant angulations (p<.05). 2. Group 4 showed shorter insertion time than group 3, regardless of implant angulations (p<.05). Conclusion. Modified abutment screw drivers required less amount of time to insert screw driver into abutment screw head. Modification of abutment screw driver was beneficial.

• Korean Journal of Culture and Social Issue
• /
• v.12 no.5_spc
• /
• pp.149-167
• /
• 2006

Korean society is rapidly changing to aging society comparing the other industrialized countries, however, the studies of elderly driver's driving behavior and accidents are not enough in Korea for elderly driver's accident prevention. This study focused on the elderly driver's psychological effects on elderly driver's driving behavior and traffic accidents; carefulness and aberrant driving behavior. - Elderly driver's traffic accidents The high percentage of elderly driver's accidents occurs in intersections and when turning left. There was a significant difference of the opponent vehicle's speed when left turn, between elderly driver and young driver; the elderly driver choose the higher speed of opponent vehicle than young driver when left turning. This result means that elderly driver has some problems with deciding the vehicle's speed and gap acceptance(Sunyeol Lee, Soonchul Lee, and Inseok Kim, 2006)(Table 1). - Carefulness and driving confidence In order to understand elderly driver's carefulness, this study compared the elderly driver's driving confidence. Driving confidence was consisted of 4 factors; environment of traffic condition, safe driving, driving ability and attention. Elderly driver's confidence was lower than young driver's. Elderly driver in high driving confidence group, showed longer driving history and they were tend to commit violations more frequently than elerly driver in low driving confidence group. Young driver, whose driving confidence level was high answered more driving history, annual mileage, the frequency of committing traffic violation and the experience of accident within lats 5 years(Soonchul Lee, Juseok Oh, Sunjin Park, Soonyeol Lee and Inseok Kim, 2006)(Table 2). This study examined the total time required until deciding to turn left in the no traffic signal intersection between elderly driver and young driver. The result showed that the time of elderly driver was significant longer than young driver(Sunyeol Lee et al, 2006)(Table 3). - Elderly driver's aberrant behavior Driver behavior Questionnaire(DBQ) was measured to understand the aberrant behavior; violation, error and lapse. The tend of aberrant behavior was observed by aging(Sunjin Park, Soonchul Lee, Jonghoi, Kim and Inseok Kim, 2006). Elderly driver's DBQ score was lower than young driver's(Table 4). Elderly and young driver showing longer driving history were in low DBQ score group. Elderly driver had high error score and young driver had high violation score. Young driver's aberrant driving behaviour was associated with annual mileage and the frequency of committing traffic violation. Elderly driver's aberrant driving behaviour was associated with annual mileage and experience of accident. Especially elderly driver whose violation, error and lapse score was high answered more committing experience of accident within last 5 years.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.202-209
• /
• 2000

This paper introduces the main function and protection method of IGBT gate driver that designed by KOROS. Recently, the applications of insulated gate bipolar transistors(IGBTs) have expanded widely, particularly in the area of railway converters. This driver is suitable for railway traction applications, so they are designed for circumstance of railway vehicle such as vibration. The input control power for this driver is supplied from battery charger of railway. it is no necessary an isolated power supply board or auxiliary power supply, with substantial savings in cost and space in railway applications. This gate driver can be used wide range of input voltage. So, performance of the driver has no relation with the battery voltage(70V∼110V). The protection methods of IGBT gate driver have many kind of ways, but this gate driver it designed to apply to converter for railway system, so this gate driver includes protection for arm short current and low control power voltage, etc. And the process of protection method and protection reference value are optimized by means of sufficient test with our own facilities.

• Electronics and Telecommunications Trends
• /
• v.33 no.4
• /
• pp.61-69
• /
• 2018

Driver-specific technology in the automotive field has been commercialized for vehicle accessories, driver memory sheets, and side mirrors. In recent years, the demand for customized technology has expanded to include the user interface of an infotainment system (Infotainment System) and advanced driver support system (Advanced Driver Assistance System), and customized technologies for drivers have been studied. Therefore, this article describes the driver-tailored technology trends being studied in these fields, and examines the major research issues related to future driver-tailored technologies in the automotive field.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1340-1343
• /
• 1996

In this study, we developed the drowziness prevention system to detect the driver's drowziness and relieve the driver. A computer vision method was proposed to detect the driver's drowziness. We extracted the eyes and mouth in the face image and tracked the positions from the image sequencies in real time. The eye blink duration and yawning was used as the parameters of drowziness. Wehn the drowziness state of a driver is detected, the driver is refreshed by the scent generator and the alarm. Also, the driver's bio-signal is acquired and analysed the vigilance state.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.142-147
• /
• 2014

Real time driver's respiration monitoring method for detecting driver's drowsiness is investigated. The sensor to obtain driver's respiration signal was a piezoelectric pressure sensor attached at the abdominal region of the seat belt. The resistance of the pressure sensor was changed according to the pressure applied to the seat belt due to the driver's respiration. Monitoring driver's respiration was carried out by driving on the virtual road in a driving simulator from Cheonan to Seoul and monitoring results were compared to the PELCLOS. Experiment results show that the driver's respiration signal can be used for detecting driver's drowsiness.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.85-88
• /
• 2008

LED를 구동하기 위하여 여러 가지 주변회로를 하나의 IC로 통합한 Driver IC는 최근 LED의 효율의 증가와 더불어 다양한 사용처의 발생으로 인하여 그 종류가 다양해졌다. 본 연구에서는 이러한 다양한 Driver IC들의 특성을 평가하기 위한 방법 및 다양한 Application의 적용을 통한 Driver IC의 성능을 평가하였다. Driver IC의 기능성과 내구성을 판단하기 위한 시험들을 진행하였다. 여러 종류의 LED를 사용하여 Driver IC의 성능을 평가하였다. Driver IC에 원하는 동작을 구현하고자 하는 제어회로 부분도 설계하여 다양한 특성들을 분석할 수 있도록 하였다. 3종류의 응용제품을 구현하여 적용의 사례로 검토하였고 각각의 응용제품의 경우 필요한 기능들에 대한 분석도 실시하였다. 전체적으로 반도체 IC 시험규격에 의한 신뢰성 시험도 일부 실시를 하여 신뢰성에 대한 부분도 평가를 진행하였다. 이를 통하여 Driver IC의 필요요소에 대한 부분들을 결정하였다.