• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4529-4548
• /
• 2016

DDoS attacks have had a devastating effect on the Internet, which can cause millions of dollars of damage within hours or even minutes. In this paper we propose a practical dynamic defense approach that overcomes the shortage of static defense mechanisms. Our approach employs a group of SDN-based proxy switches to relay data flow between users and servers. By substituting backup proxy switches for attacked ones and reassigning suspect users onto the new proxy switches, innocent users are isolated and saved from malicious attackers through a sequence of remapping process. In order to improve the speed of attacker segregation, we have designed and implemented an efficient greedy algorithm which has been demonstrated to have little influence on legitimate traffic. Simulations, which were then performed with the open source controller Ryu, show that our approach is effective in alleviating DDoS attacks and quarantining the attackers by numerable remapping process. The simulations also demonstrate that our dynamic defense imposes little effect on legitimate users, and the overhead introduced by remapping procedure is acceptable.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.131.1-134
• /
• 1999

The effect of dynamic recrystallization during hot forming process was implemented to a commercial FEM code by conditioned remeshing and remapping of sate variables. A datum strain for stress compensation was determined as a strain for maximum softening rate and was able to be formulated as a function of critical strain f($\varepsilon$). The validity of remapping criterion was examined by a series of mechanical tests and microstructural observation. The application of suggested datum resulted in better estimation of load-stroke during forging processes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.6098-6122
• /
• 2018

Cache-based side-channel attacks have achieved more attention along with the development of cloud computing technologies. However, current host-based mitigation methods either provide bad compatibility with current cloud infrastructure, or turn out too application-specific. Besides, they are defending blindly without any knowledge of on-going attacks. In this work, we present CacheSCDefender, a framework that provides a (Virtual Machine Monitor) VMM-based comprehensive defense framework against all levels of cache attacks. In designing CacheSCDefender, we make three key contributions: (1) an attack-aware framework combining our novel dynamic remapping and traditional cache cleansing, which provides a comprehensive defense against all three cases of cache attacks that we identify in this paper; (2) a new defense method called dynamic remapping which is a developed version of random permutation and is able to deal with two cases of cache attacks; (3) formalization and quantification of security improvement and performance overhead of our defense, which can be applicable to other defense methods. We show that CacheSCDefender is practical for deployment in normal virtualized environment, while providing favorable security guarantee for virtual machines.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.418-422
• /
• 2005

In this paper, a novel algorithm capable of detecting generic obstacles on a flat surface is proposed. The algorithm fundamentally exploits a distortion phenomena taken place in remapping process of original stereo images to a virtual top-view. Based on the distortion phenomena, we construct stereo polar histograms of edge maps, detect peaks on them, and search for matched peaks on both histograms using a Dynamic Programming (DP). Eventually, the searched corresponding peaks lead to estimate obstacles' positions. The advantages of the proposed algorithm are that it is not largely affected by an intensity difference between a pair of stereo images and does not depend on the typical stereo matching methodologies. Furthermore, the algorithm identifies the obstacles' positions quite robustly.

• 소성∙가공
• /
• 제10권2호
• /
• pp.137-143
• /
• 2001

The change of flow stress due to dynamic recrystallization during hot forming process is investigated. A series of mechanical tests has been conducted at various temperatures, and constitutive relations and recrystallization kinetics were formulated from the test results. The effect of dynamic recrystallization to the flow stress was implemented to a commercial FEM code by conditioned remapping of state variables. The datum strain of stress compensation was optimized to minimize the overestimation of forming loads. Suggested datum was formulated as an exclusive function of critical strain for recrystallizalion and validated by mechanical tests and microstructural observations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.203-206
• /
• 1999

The shift of flow behavior due to dynamic recrystallization during hot forming process is investigated, A series of load relaxation and compression tests has been conducted at various temperatures Constitutive relations and recrystallization behaviors were formulated from the mechanical test results, The consideration of dynamic recrystallization during a specific forming process was implemented to commercial FEM package by conditioned remeshing and remapping of state variables. Improvement of Load-Stroke prediction was validated by comparison with experimental results.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.137-140
• /
• 2021

High dynamic range (HDR) technology has been drawing attention in the field of imaging and consumer entertainment. As tools for capturing and creating HDR contents, encoding, and transmission evolve to support HDR formats, various display capabilities are being developed and increased. Hence, there is need for remapping native HDR imagery for display on lower quality legacy standard dynamic range (SDR) displays. This operation is referred to as tone mapping. In this paper, we present a sectional tone mapping method by Lenzen, and expand upon a tone mapping approach to improve temporal stability while maintaining picture quality. Compared to the existing block-based sectional tone mapping, our method uses the edge awareness-based tone mapping. We estimate the performance of the objective metric on temporal flickering. The experimental result shows that the algorithm maintains a smoother relationship between the output luminance values, and this reveals success in reducing halos and improving temporal stability with adopted edge aware filtering.

• 소성∙가공
• /
• 제17권2호
• /
• pp.117-123
• /
• 2008

In this study, optimum processing condition of rolled AZ31 Mg alloy was investigated by utilizing processing map and constitutive equation considering microstructure evolution(dynamic recrystallization) occurring during hot-working. A series of mechanical tests were conducted at various temperatures and strain rates to construct a processing map and to formulate the recrystallization kinetics in terms of grain size. Dynamic recrystallization(DRX) was observed to occur at a domain of $250^{\circ}C$ and 1/s(maximum dissipation-efficiency region). The effect of DRX kinetics on microstructure evolution was implemented in a commercial FEM code followed by remapping of the state variables. The volume fraction and grain size of deformed part were predicted using a modified FEM code and were compared with those of actual hot forged part. A good agreement was observed between the experimented results and predicted ones.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.31-34
• /
• 2007

In this study, optimum processing condition of AZ31 Mg alloy was investigated utilizing processing map and constitutive equation considering microstructure evolution (dynamic recrystallization) during hot-working. A series of mechanical tests were conducted at various temperatures and strain rates to construct a processing map and to formulate the recrystallization kinetics and grain size relation. Dynamic recrystallization (DRX) was observed to occur revealing maximum intensity at a domain of $250^{\circ}C$ and 1/s. The effect of DRX kinetics on microstructure evolution was implemented in a commercial FEM code followed by remapping of the state variables. The volume fraction and grain size of deformed part were predicted using a modified FEM code and compared with those of actual hot forged one. A good agreement was observed between the experimental results and predicted ones.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권10호
• /
• pp.1003-1012
• /
• 2005

내장형 시스템과 범용 시스템의 가장 큰 차이는 유한한 전력인 배터리를 사용한다는 것과 대용량의 디스크를 사용하지 않고 메모리에 의존한다는 것이다. 특히 멀티미디어 데이타를 처리하는 응용프로그램이 늘어감에 따라 메모리 사용량이 기하급수적으로 증가하고 있어서 메모리가 성능과 에너지 소비의 병목지점으로 작용하게 되었다. 따라서 데이타 접근 비용을 줄이고자 하는 시도가 많이 이루어지고 있다. 대부분의 프로그램은 지역성을 갖는다. 지역성은 한번 참조된 데이타가 조만간 다시 참조된다는 시간적 지역성(temporal locality)과 근접한 곳에 할당된 데이타끼리 함께 참조된다는 공간적 지역성(spatial locality)으로 나눌 수 있다. 최근의 많은 임베디드시스템은 이 두 가지 지역성을 이용한 캐시 메모리를 사용함으로써 메모리 접근 시간을 대폭 줄이고 있다. 우리는 이 논문에서 낭비되는 메모리 공간을 줄이고, 캐시 실패율(cache miss rate)과 프로그램 수행시간을 줄일 수 있도록 구조체 형식의 데이타를 항목(field)별로 재배치시키는 알고리즘을 제안하고자 한다. 이 알고리즘은 동적으로 할당되는 구조체의 각 필드를 압축된 형태로 모아서 재배치함으로써, 실험에서 사용한 Olden 벤치마크의 Ll캐시 실패는 평균 $13.9\%$를, L2 캐시 실패는 평균 $15.9\%$를 이전 연구들보다 줄일 수 있었다. 수행시간 또한 이전의 방법보다 평균 $10.9\%$ 줄인 결과를 얻을 수 있었다.