• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.276-280
• /
• 1999

Electrical properties of electrochromic (EC) InN thin films prepared by rf ion plating were studied. There was a correlation between the electrical properties and the electrochromism in the InN films, particularly, carrier concentration changes were responsible for the electrical resistivity changes of the films due to the electrochromism. These carrier concentration changes were caused by chemisorbed hydroxyl groups and protons. From these results, it was proved that the carrier concentration changes of the InN films was responsible for the electrochromism in the visible and near-infrared region.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.105-105
• /
• 2015

전기변색 (electrochromism) 박막은 전기화학적 산화, 환원 과정을 통해 가역적인 광학 특성의 변화를 갖는 현상을 말하며, 이를 이용한 전기변색 소자(electrochromic device)는 전력 소모가 적고 변색 효율이 크다는 장점으로 인해 Smart window, display, mirror 등에 응용 될 수 있다. 본 연구에서는 대표적인 전기 변색 물질인 WxOy, NixOy 전기 변색 재료의 Sputtering법으로 증착한 박막의 특성에 대하여 평가하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2119_2120
• /
• 2009

전압을 인가하였을 때 전계방향에 의해 가역적으로 색이 변화하는 현상을 전기변색(electrochromism)이라고 한다. 이러한 전기채색현상을 보이는 물질을 전기채색물질(electrochromism materials)이라고 하며, 전기채색 물질에 의한 소자를 전기채색소자(electrochromism device : ECD)라고 한다. 전기채색현상은 투과율(transmittance), 반사율(reflectance)의 가역적이며 가시적인 변화이고, 전기화학적인 산화환원 반응과 관련이 있다. 따라서 본 연구에서는 Titanate nanotube(TNT)를 제조하고 전기변색소자(ECD)에 응용하였다. SEM, XRD, UV-Vis등을 이용하여 재료학적 분석을 시행하였으며, 전기화학적 테스트로 cyclic voltammetry를 측정 하였다. 그 결과 TNT 분말은 직경 약 20~30 nm, 길이 약 500~600 nm 의 입자형상을 나타내었으며, X-선 회절시험결과 $H_2Ti_2O_5{\cdot}H_2O$의 층상구조를 나타내었다. 제조된 막은 FTO glass 위에 PEI/(TNT/TBAOH)$_{n-1}$/PDDA의 순으로 코팅되었다. 전기화학적 테스트를 위하여 2전극 시스템을 제작하였으며, 여러 종류의 액체 전해질을 제작하여 cycle voltammetry를 시행하였다. 그 결과, 각각의 전해질에서 "-"영역의 산화환원전위 피크가 뚜렷하게 나타났으며, 짙은 갈색으로의 채색현상을 나타냈다. 본 연구의 결과로서 TNT 박막을 이용한 ECD은 광조절 유리로서 뿐만 아니라, 여러 전기채색 디바이스에 응용될 것으로 사료된다.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.367-372
• /
• 2006

Electrochromic materials based on conducting polymers with pendant chromophores as well as their electrochromic properties are described. The conducting polymers described aye polypyrrole, polythiophene, poly(3,4-ethylenedioxythiophene), poly (cyclopentadithiophene), and poly (1,4-bis [2- (3,4-ethylenedioxy) thienyl] benzene). The chromophores described are viologen and perylenetetra-carboxylic diimide. When the wavelength ranges of absorption of the conducting polymer and the chromophore aye not overlapping, multiple electrochromism was achieved. When the wavelength ranges are largely overlapping, higher contrast was achieved. An easy method for prediction of the film thickness for maximum contrast of a given electrochromic material is also described.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.129-129
• /
• 2003

전기변색(electrochromism)은 전기화학적 산화, 환원 과정을 통해 가역적인 광학특성의 변화를 갖는 현상을 말하며, 이를 이용한 전기변색소자(electrochromic device)는 전력 소모가 적고 변색효율이 크다는 장점으로 인해 smart window, display, mirror 등에 응용될 수 있다. 전기변색소자는 구조상 투명 기판, 투명 전도체, 환원 착색 물질 (cathodic coloration material), 산화 착색 물질(anodic coloration material), 그리고 투명 이온 전도체로 구성된다. 일반적으로 투명 기판으로는 열적 안정성이 좋은 유리기판을 사용하여 window에 응용할 수 있는 장점이 있는 반면 다양한 형태를 갖는 소자를 제작하기에는 그 한계가 있다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3069-3072
• /
• 2009

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.85-91
• /
• 1998

The electrochromic behaviors of de-magnetron sputtered tungsten oxide thin films were investigated during coloration and bleach cycles using in situ real-time spectroscopic ellipsometry. Effective medium approximation and least-squares regression analyses were employed to investigate the electrochromic process. The optical properties of the tungsten oxide film were analyzed using the oscillator model and the evolution of the process using a reaction-limited model. In these analyses, we found that two different reaction rates were associated with the process. We ascribe this behavior to the microstructure of this films.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.12
• /
• pp.1337-1341
• /
• 1998

The charge transfer (CT) complex dyes between electron donor phenothiazine and electron acceptors namely, 2, 3-dichloro-1,4-naphtoquinone and 2,3-dichloro-5-nitro-1,4-naphtoquinone, were formed in the dichloromethane solution and electrochromic properties were studied using Bu4NC1O4 as supporting electrolyte. A 1 : 1 correspondence between the donor and acceptor molecules in the CT complex was found.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.7-11
• /
• 2018

In this study, we synthesize tungsten oxide thin films by electrodeposition and characterize their electrochromic properties. Depending on the deposition modes, compact and porous tungsten oxide films are fabricated on a transparent indium tin oxide (ITO) substrate. The morphology and crystal structure of the electrodeposited tungsten oxide thin films are investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). X-ray photoelectron spectroscopy is employed to verify the chemical composition and the oxidation state of the films. Compared to the compact tungsten oxides, the porous films show superior electrochemical activities with higher reversibility during electrochemical reactions. Furthermore, they exhibit very high color contrast (97.0%) and switching speed (3.1 and 3.2 s). The outstanding electrochromic performances of the porous tungsten oxide thin films are mainly attributed to the porous structure, which facilitates ion intercalation/deintercalation during electrochemical reactions.

• Journal of Powder Materials
• /
• v.22 no.5
• /
• pp.309-314
• /
• 2015

Tungsten trioxide thin films are successfully synthesized by a sol-gel method using tungsten hexachloride as precursors. The structural, chemical, and optical properties of the prepared films are characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and UV-Vis spectrophotometry. The electrochemical and electrochromic properties of the films before and after heat treatment are also investigated by cyclic voltammetry, chronoamperometry, and in situ transmittance measurement system. Compared to as-prepared films, heat-treated tungsten trioxide thin films exhibit a higher electrochemical reversibility of 0.81 and superior coloration efficiency of $65.7cm^2/C$, which implies that heat treatment at an appropriate temperature is a crucial process in a sol-gel method for having a better electrochromic performance.