• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.506-511
• /
• 2009

An algorithm for identifying track irregularities along the railway is presented. A baseline frequency-domain transfer function based on the equivalent SlSO(Single Input Single Output) model is defined at the intact condition between the measured track geometry of the ground displacement and the acceleration measured at a location in a train. The pre-defined transfer function at the intact condition is used inversely to predict track geometry in time with the currently measured acceleration at the same location in a train. The predicted track geometry is compared in time with that of the baseline values at the intact condition. The difference between them is calculated as an error in time and used to identify the track irregularities. An irregularity index is proposed as the ratio between the moving variance of the error at the current inspection and that at the intact condition. A 3D numerical simulation study has been carried out with a train model to verify the validity of the presented algorithm. In the analysis for the simulation, the track geometry has been considered as the displacement boundary condition varying in time.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.304-308
• /
• 2010

This paper presents a methodology for identifying track irregularity using a wavelet transfer function. An equivalent wavelet SISO (single-input single-output) transfer function is defined by the measured track geometry and the acceleration data measured at a bogie of a train. All the measured data with various sampling frequencies were rearranged according to the constant 25cm reference recording distance of the track recording vehicle used in the field. Before applying the wavelet transform, measured data were regressed by eliminating those out of the range. The inverse wavelet transfer function is also formulated to estimate track geometry. The closeness of the estimated track geometry to the actual one is evaluated by the coherence function and also by FRF (frequency response function). A track irregularity index is defined by comparing the variance of the estimation error from the intact condition and that from the current condition. A simulation study has been carried out to examine the proposed algorithm.

• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1379-1394
• /
• 2002

In case of a single input single output (SISO) system with a nonlinear term, a signal compression method is useful to identify a system because the equivalent impulse response of linear part from the system can be extracted by the method. However even though the signal compression method is useful to estimate uncertain parameters of the system, the method cannot be directly applied to a unique system with hysteresis characteristics because it cannot estimate all of the two different dynamic properties according to its motion direction. This paper proposes a signal compression method with a pre-processor to identify a unique system with two different dynamics according to its motion direction. The pre-processor plays a role of separating expansion and retraction properties from the system with hysteresis characteristics. For evaluating performance of the proposed approach, a simulation to estimate the assumed unknown parameters for an arbitrary known model is carried out. A motion platform with several single-rod cylinders is a representative unique system with two different dynamics, because each single-rod cylinder has expansion and retraction dynamic properties according to its motion direction. The nominal constant parameters of the motion platform are experimentally identified by using the proposed method. As its application, the identified parameters are applied to a design of a sliding mode controller for the simulator.